CNC Operator Certification exam answers 2026: This page lists all 100 questions of the official CNC Operator Certification exam by Itronix Solutions, each with its four answer options and the correct answer highlighted in green. Use it to revise every topic before you attempt the test and earn your verifiable certificate.
About this certification: The CNC operator handles the computer numerical control machine. Maintaining, setting, and adjusting the machine are all part of the operator’s daily tasks.
| Certification | CNC Operator Certification |
| Provider | Itronix Solutions |
| Category | Engineering & CAD |
| Total questions | 100 multiple-choice questions |
| Marks | 1 mark per question (100 marks) |
| Passing score | 80% (80 out of 100) |
| Retake | Available if you do not pass |
| Certificate | Verifiable online certificate |
Take the exam: CNC Operator Certification on Itronix Solutions. See every other Itronix exam in our complete list of Itronix certification answers.
CNC Operator Exam Questions and Answers
Questions 1 to 25
1. What is the advantage of CNC machine?
Correct answer: A. Complicated jobs machining
2. Which operation is performed by point- to-point system?
Correct answer: A. Drilling
3. In machining of a workpiece, the material is removed by_____
Correct answer: B. shearing acting
4. The depth that the tool is plunged into the surface is called as ______
Correct answer: B. depth of cut
5. What does CNC machine use to control motion and speed?
Correct answer: C. Programs, as well as computer keyboard, Graphical user interface
6. The function of the feedback system is to record the data from the sensor and compare it with output data.
Correct answer: B. False
7. What is the function of the GUI(Graphical user interface)?
Correct answer: D. To understand the position of the tool according to the input program
8. The punch tape reader in a CNC machine is ____
Correct answer: D. input device
9. A CNC machine find widest applications in the field of
Correct answer: A. small lot and batch production
10. A CNC machine tool has a continuous part control both linear and circular along X, Y, Z and control of table rotation about X axis and Z axis, so the machine should be called
Correct answer: A. 5C
11. Which code is used for ‘Circular interpolation clock wise direction’?
Correct answer: B. G02
12. What is the operation to produce internal thread in VMC?
Correct answer: B. Tapping
13. Feed is measured in units of _____
Correct answer: C. length/revolution
14. CNC machining centres do not include operations like ______
Correct answer: C. welding
15. What is the function of the GUI(Graphical user interface)?
Correct answer: D. To understand the position of the tool according to the input program
16. The punch tape reader in a CNC machine is ____
Correct answer: D. input device
17. A machine will be said to have CNC control if
Correct answer: A. control is achieved by employment of alphanumeric data
18. CNC machining has the following main advantage over conventional machining practice
Correct answer: A. flexibility
19. Which motor is used for table movement on CNC milling?
Correct answer: B. Servo motor
20. What is part program?
Correct answer: B. Instruction to machine
21. A CNC operator’s main responsibility is to:
Correct answer: C. Set up, run and monitor CNC machines to produce accurate parts
22. CNC machines read instructions written in:
Correct answer: D. G-code and M-code
23. The machine zero (home) position is:
Correct answer: C. A fixed reference point defined by the machine manufacturer
24. The work zero (part zero) is:
Correct answer: C. The reference point set by the operator on the workpiece
25. G54 to G59 commands select:
Correct answer: D. Work coordinate offsets
Questions 26 to 50
26. G90 sets:
Correct answer: A. Absolute positioning mode
27. G91 sets:
Correct answer: A. Incremental positioning mode
28. G20 and G21 select:
Correct answer: A. Inch and millimetre units respectively
29. G17 selects:
Correct answer: D. The XY plane for circular interpolation
30. G28 typically:
Correct answer: B. Returns the machine to its reference (home) position
31. G40, G41 and G42 relate to:
Correct answer: A. Cutter radius compensation off, left and right
32. G43 activates:
Correct answer: D. Tool length compensation
33. G81 is commonly:
Correct answer: D. A simple drilling canned cycle
34. G83 is commonly:
Correct answer: D. A peck drilling cycle
35. G84 is commonly:
Correct answer: B. A tapping cycle
36. Canned cycles help to:
Correct answer: B. Shorten programs for repetitive operations like drilling
37. M03 starts the spindle:
Correct answer: B. Clockwise
38. M04 starts the spindle:
Correct answer: B. Counter-clockwise
39. M05 is used to:
Correct answer: D. Stop the spindle
40. M06 is used to:
Correct answer: C. Perform a tool change
41. M08 turns:
Correct answer: A. Coolant on
42. M09 turns:
Correct answer: A. Coolant off
43. M00 causes:
Correct answer: B. A program stop until the operator restarts
44. M01 is:
Correct answer: C. An optional stop active only when enabled
45. An F word in G-code specifies:
Correct answer: D. Feed rate
46. An S word in G-code specifies:
Correct answer: A. Spindle speed
47. A T word in G-code specifies:
Correct answer: B. The tool number
48. Spindle speed (RPM) for milling is calculated from:
Correct answer: C. Cutting speed and tool diameter
49. Feed per tooth (chip load) affects:
Correct answer: C. Surface finish, tool life and cutting forces
50. Climb milling means:
Correct answer: C. The cutter rotates in the same direction as the feed
Questions 51 to 75
51. Conventional milling means:
Correct answer: D. The cutter rotates against the direction of feed
52. Depth of cut refers to:
Correct answer: B. How deep the tool cuts into material in one pass
53. End mills are used for:
Correct answer: B. Milling slots, pockets and profiles
54. Face mills are used to:
Correct answer: D. Machine flat surfaces on a workpiece
55. Drills are used to:
Correct answer: B. Create holes
56. Taps are used to:
Correct answer: D. Cut internal threads
57. Carbide tools compared with HSS tools:
Correct answer: D. Withstand higher cutting speeds and temperatures
58. Tool wear can cause:
Correct answer: C. Poor surface finish and dimensional errors
59. A tool offset (length/diameter) compensates for:
Correct answer: D. Differences in actual tool dimensions
60. Touching off a tool means:
Correct answer: D. Measuring its length or position relative to the work
61. A tool setter or probe helps to:
Correct answer: C. Measure tools and workpieces automatically
62. Workholding devices include:
Correct answer: D. Vises, chucks, fixtures and clamps
63. A three-jaw chuck on a lathe:
Correct answer: A. Self-centres round workpieces
64. A CNC lathe performs:
Correct answer: A. Turning operations on rotating workpieces
65. Facing on a lathe:
Correct answer: C. Machines the end of a workpiece flat
66. Turning on a lathe:
Correct answer: D. Reduces the outside diameter of a rotating part
67. Boring enlarges:
Correct answer: D. An existing hole to precise size
68. Threading on a lathe often uses:
Correct answer: D. G76 or G92 threading cycles
69. A dry run means:
Correct answer: B. Running a program without cutting to check motion
70. Single block mode lets the operator:
Correct answer: B. Execute the program one line at a time
71. Feed override allows the operator to:
Correct answer: A. Adjust feed rate percentage during operation
72. Rapid override reduces:
Correct answer: D. The speed of rapid moves for safer setup
73. Graphics simulation on the control helps to:
Correct answer: B. Visualise tool paths before cutting
74. CAM software generates:
Correct answer: C. Tool paths and G-code from CAD models
75. Post-processors in CAM:
Correct answer: D. Convert tool paths into machine-specific G-code
Questions 76 to 100
76. Vernier callipers measure:
Correct answer: A. Lengths and diameters with good precision
77. Micrometers measure:
Correct answer: D. Very precise dimensions, often to 0.01 mm or better
78. Dial indicators are used to:
Correct answer: C. Check runout, flatness and alignment
79. Height gauges are used to:
Correct answer: D. Measure and mark vertical dimensions
80. Go/No-Go gauges check:
Correct answer: A. Whether a feature is within tolerance
81. Tolerance on a drawing specifies:
Correct answer: B. The allowable variation in a dimension
82. Surface finish (Ra) indicates:
Correct answer: B. The average roughness of a machined surface
83. First article inspection verifies:
Correct answer: C. The first part meets all drawing requirements before production
84. Coolant in machining helps to:
Correct answer: A. Reduce heat, flush chips and improve tool life
85. Chip control is important because:
Correct answer: C. Long chips can damage parts, tools and endanger operators
86. Personal protective equipment for CNC operators includes:
Correct answer: A. Safety glasses, safety shoes and hearing protection
87. Loose clothing near rotating machinery is dangerous because:
Correct answer: D. It can get caught and cause serious injury
88. Machine doors and guards should be:
Correct answer: D. Closed during operation
89. Emergency stop buttons should be used:
Correct answer: D. Immediately when a dangerous situation arises
90. Preventive maintenance of CNC machines includes:
Correct answer: B. Checking lubrication, coolant and cleaning chips
91. Machine alarms indicate:
Correct answer: D. Errors or conditions requiring operator attention
92. Backlash in a machine axis can cause:
Correct answer: D. Positioning errors when direction changes
93. Reading engineering drawings is essential to:
Correct answer: C. Understand dimensions, tolerances and features to machine
94. Quality documentation for parts includes:
Correct answer: C. Inspection records and measurement reports
95. The main goal of a CNC operator is to:
Correct answer: A. Produce accurate, high-quality parts safely and efficiently
96. G00 is used for:
Correct answer: A. Rapid positioning without cutting
97. G01 is used for:
Correct answer: C. Linear interpolation at a programmed feed rate
98. G02 performs:
Correct answer: A. Clockwise circular interpolation
99. G03 performs:
Correct answer: B. Counter-clockwise circular interpolation
100. M30 means:
Correct answer: B. End of program and rewind to the start
How to Pass the CNC Operator Exam
- Read every question carefully; most options look similar, so look for the most precise answer.
- Revise the questions above topic by topic rather than memorising letters, because option order can change in the live test.
- You need 80 correct answers out of 100 to pass, so aim to understand at least 85 to stay safe.
- If you do not clear it on the first attempt, review the questions you missed and use the retake option.
Frequently Asked Questions
How many questions are in the CNC Operator Certification exam?
The exam has 100 multiple-choice questions, each worth 1 mark.
What is the passing score for the CNC Operator Certification?
You need at least 80% (80 out of 100) to pass and receive the certificate.
Can I retake the CNC Operator Certification exam?
Yes. If you score below 80%, you can retry the test after reviewing the topics.
Is the Itronix certificate verifiable?
Yes. Every certificate issued by Itronix Solutions has a unique ID that can be checked on the Itronix verify-certificate page.
More Engineering & CAD Certification Answers
- ANSYS Structural Analysis Certification Exam Answers
- AutoCAD Certification Exam Answers
- AutoCAD Civil 3D Certification Exam Answers
- Basics of Civil Engineering Certification Exam Answers
- CATIA – Computer Aided Design and Drafting Certification Exam Answers
- MATLAB Certification Exam Answers
- PLC Programming Certiication Exam Answers
- Robotics Certification Exam Answers
Disclaimer: These answers are provided for learning and revision. Questions and answers are checked regularly; if you find a mistake, let us know in the comments.
Priya Dogra – Free Certifications, Exam Answers & Career Guides Free certification exam answers, courses, scholarships and career guides for learners worldwide