Wednesday , November 18 2026
Breaking News

Robotics Certification Exam Answers 2026 (All 100 Questions)

Robotics Certification exam answers 2026: This page lists all 100 questions of the official Robotics Certification exam by Itronix Solutions, each with its four answer options and the correct answer highlighted in green. Use it to revise every topic before you attempt the test and earn your verifiable certificate.

About this certification: A robot is a programmable machine that can complete a task, while the term robotics describes the field of study focused on developing robots and automation.

Certification Robotics Certification
Provider Itronix Solutions
Category Engineering & CAD
Total questions 100 multiple-choice questions
Marks 1 mark per question (100 marks)
Passing score 80% (80 out of 100)
Retake Available if you do not pass
Certificate Verifiable online certificate

Take the exam: Robotics Certification on Itronix Solutions. See every other Itronix exam in our complete list of Itronix certification answers.

Robotics Exam Questions and Answers

Questions 1 to 25

1. The robots with the designation TRI are known as ___________ robots?

A. Spherical ✔
B. Articulated
C. Both a and b
D. None of the above

Correct answer: A. Spherical

2. How many sections does robot manipulator consists of?

A. one
B. two ✔
C. three
D. four

Correct answer: B. two

3. Which one of the following generation robots are remote controlled?

A. first ✔
B. secod
C. third
D. none

Correct answer: A. first

4. What is the standard form of DOF?

A. Degree of Fail
B. Degree of Finance
C. Degree of Freedom ✔
D. None of the above

Correct answer: C. Degree of Freedom

5. The study of motion without regard to forces is known as _________?

A. Actuator
B. Dynamics
C. Kinematics ✔
D. Sensor

Correct answer: C. Kinematics

6. Which one of the following robots also called spherical robot?

A. Delta
B. Polar ✔
C. SCARA
D. None of the above

Correct answer: B. Polar

7. Clockwise of Anti clockwise rotation about the vertical axis to the perpendicular arm is provided through

A. Elbow extension
B. Arm sweep ✔
C. Shoulder swivel
D. Wrist bend

Correct answer: B. Arm sweep

8. Radial movement (in & out) to the manipulator arm is provided by

A. Elbow extension ✔
B. Wrist bend
C. Wrist swivel
D. Wrist yaw

Correct answer: A. Elbow extension

9. Industrial Robots are generally designed to carry which of the following coordinate system(s).

A. Cartesian coordinate systems
B. Cylindrical coordinate system
C. Polar coordinate systems
D. All of the above ✔

Correct answer: D. All of the above

10. The Robot designed with Cartesian coordinate systems has

A. Three linear movements ✔
B. Three rotational movements
C. Two linear and one rotational movement
D. Two rotational and one linear movement

Correct answer: A. Three linear movements

11. What is the name for information sent from robot sensors to robot controllers?

A. pressure
B. feedback ✔
C. signal
D. temperature

Correct answer: B. feedback

12. Which of the following terms refers to the rotational motion of a robot arm?

A. axle
B. swivel
C. roll ✔
D. retrograde

Correct answer: C. roll

13. What is the name for space inside which a robot unit operates?

A. work envelope ✔
B. exclusion zone
C. environment
D. spatial base

Correct answer: A. work envelope

14. Which of the following terms IS NOT one of the five basic parts of a robot?

A. drive
B. peripheral tools ✔
C. end effectors
D. controller

Correct answer: B. peripheral tools

15. Decision support programs are designed to help managers make __________

A. business decisions ✔
B. visual presentations
C. vacation schedules
D. budget projections

Correct answer: A. business decisions

16. PROLOG is an AI programming language which solves problems with a form of symbolic logic known as predicate calculus. It was developed in 1972 at the University of Marseilles by a team of specialists. Can you name the person who headed this team?

A. Seymour Papert
B. Alain Colmerauer ✔
C. Niklaus Wirth
D. John McCarthy

Correct answer: B. Alain Colmerauer

17. A place where power, information, or a result leaves a system

A. troubleshooting
B. chassis
C. output ✔
D. sensor

Correct answer: C. output

18. Which of the following describes the a use of technology or machinery, specifically involving gases?

A. Carbonation
B. Pneumatics ✔
C. Hydraulics
D. Actuation

Correct answer: B. Pneumatics

19. A mechanism having its motive power so concealed that it appears to move spontaneously

A. Automata ✔
B. Automatic
C. Clock Jack
D. Robot

Correct answer: A. Automata

20. Which of the following is not an advantage of Robots?

A. They don’t get tired or require a break
B. They can replace jobs ✔
C. They can be used in dangerous environment
D. They can assist humans with disabilities

Correct answer: B. They can replace jobs

21. Robotics combines:

A. Mechanical engineering, electronics and computer science ✔
B. Only painting
C. Only accounting
D. Only music

Correct answer: A. Mechanical engineering, electronics and computer science

22. A robot typically consists of:

A. Only wheels
B. Sensors, actuators, a controller and a power source ✔
C. Only software
D. Only a screen

Correct answer: B. Sensors, actuators, a controller and a power source

23. The word "robot" comes from:

A. A 2010 film
B. Karel Capek’s 1920 play R.U.R. ✔
C. A Japanese company
D. A Latin poem

Correct answer: B. Karel Capek’s 1920 play R.U.R.

24. Isaac Asimov is known for:

A. Creating ROS
B. The Three Laws of Robotics ✔
C. Building the first PLC
D. Inventing the transistor

Correct answer: B. The Three Laws of Robotics

25. Actuators in robots:

A. Display images
B. Convert energy into motion ✔
C. Store data
D. Measure temperature only

Correct answer: B. Convert energy into motion

Questions 26 to 50

26. Common robot actuators include:

A. Only LEDs
B. Only speakers
C. DC motors, servo motors, stepper motors and pneumatic cylinders ✔
D. Only batteries

Correct answer: C. DC motors, servo motors, stepper motors and pneumatic cylinders

27. A DC motor’s speed is commonly controlled using:

A. Volume knobs
B. PWM (pulse width modulation) ✔
C. Bluetooth only
D. Wi-Fi

Correct answer: B. PWM (pulse width modulation)

28. A servo motor provides:

A. Position control using feedback ✔
B. Sound
C. Light
D. Only constant rotation without control

Correct answer: A. Position control using feedback

29. A stepper motor moves in:

A. Only continuous rotation
B. Discrete steps for precise positioning ✔
C. Only linear motion
D. Random increments

Correct answer: B. Discrete steps for precise positioning

30. An H-bridge circuit allows:

A. Storing power
B. Displaying text
C. Measuring distance
D. Controlling the direction of a DC motor ✔

Correct answer: D. Controlling the direction of a DC motor

31. Gear ratios are used to:

A. Store data
B. Increase both speed and torque freely
C. Reduce weight only
D. Trade speed for torque ✔

Correct answer: D. Trade speed for torque

32. Torque is:

A. Linear speed
B. Rotational force ✔
C. Temperature
D. Electrical current

Correct answer: B. Rotational force

33. Encoders measure:

A. Sound level
B. Temperature
C. Light colour
D. Wheel or joint rotation for position and speed ✔

Correct answer: D. Wheel or joint rotation for position and speed

34. Ultrasonic sensors measure distance using:

A. Light only
B. Heat
C. Magnetism
D. Sound wave echoes ✔

Correct answer: D. Sound wave echoes

35. Infrared sensors are often used for:

A. Measuring weight
B. Recording audio
C. Proximity detection and line following ✔
D. Wi-Fi

Correct answer: C. Proximity detection and line following

36. LiDAR provides:

A. Temperature
B. Audio recordings
C. Precise distance measurements using laser light for mapping ✔
D. Colour only

Correct answer: C. Precise distance measurements using laser light for mapping

37. An IMU combines:

A. Wheels and gears
B. Cameras and speakers
C. Accelerometers and gyroscopes (and sometimes magnetometers) ✔
D. Batteries and motors

Correct answer: C. Accelerometers and gyroscopes (and sometimes magnetometers)

38. Gyroscopes measure:

A. Temperature
B. Colour
C. Angular velocity ✔
D. Linear distance

Correct answer: C. Angular velocity

39. Accelerometers measure:

A. Sound
B. Linear acceleration ✔
C. Humidity
D. Light

Correct answer: B. Linear acceleration

40. Cameras in robotics enable:

A. Computer vision for recognition and navigation ✔
B. Only lighting
C. Only sound
D. Only power

Correct answer: A. Computer vision for recognition and navigation

41. Force-torque sensors allow robots to:

A. Navigate maps
B. Sense contact forces for delicate manipulation ✔
C. Charge batteries
D. Measure temperature

Correct answer: B. Sense contact forces for delicate manipulation

42. Degrees of freedom (DoF) describe:

A. The number of independent movements a robot can make ✔
B. Battery capacity
C. Camera resolution
D. Number of sensors

Correct answer: A. The number of independent movements a robot can make

43. A typical industrial robot arm has:

A. Twenty degrees always
B. No joints
C. One degree
D. Six degrees of freedom ✔

Correct answer: D. Six degrees of freedom

44. Revolute joints provide:

A. No motion
B. Linear sliding
C. Only gripping
D. Rotational motion ✔

Correct answer: D. Rotational motion

45. Prismatic joints provide:

A. Only sensing
B. No motion
C. Rotation
D. Linear sliding motion ✔

Correct answer: D. Linear sliding motion

46. The workspace of a robot is:

A. Its battery range
B. The volume of space the end effector can reach ✔
C. The office it works in
D. Its memory size

Correct answer: B. The volume of space the end effector can reach

47. Forward kinematics computes:

A. Motor current
B. Joint values from target position
C. End-effector position from joint values ✔
D. Battery life

Correct answer: C. End-effector position from joint values

48. Inverse kinematics computes:

A. Camera focus
B. Sensor noise
C. Joint values needed to reach a desired position ✔
D. End-effector position from joints

Correct answer: C. Joint values needed to reach a desired position

49. Denavit-Hartenberg parameters are used to:

A. Charge batteries
B. Describe robot link and joint geometry systematically ✔
C. Colour robots
D. Program PLCs

Correct answer: B. Describe robot link and joint geometry systematically

50. Robot dynamics studies:

A. Forces and torques causing motion ✔
B. Only colours
C. Only geometry
D. Only sensors

Correct answer: A. Forces and torques causing motion

Questions 51 to 75

51. Trajectory planning determines:

A. Robot colour
B. Software licence
C. A smooth path and timing for robot motion ✔
D. Battery size

Correct answer: C. A smooth path and timing for robot motion

52. Open-loop control:

A. Is always more accurate
B. Uses cameras
C. Constantly corrects with sensors
D. Does not use feedback from sensors ✔

Correct answer: D. Does not use feedback from sensors

53. Closed-loop control:

A. Never changes output
B. Is manual
C. Ignores sensors
D. Uses sensor feedback to correct errors ✔

Correct answer: D. Uses sensor feedback to correct errors

54. A PID controller combines:

A. Proportional, integral and derivative terms ✔
B. Power, input and data
C. Position, inertia and distance
D. None

Correct answer: A. Proportional, integral and derivative terms

55. The proportional term responds to:

A. Future predictions
B. The current error ✔
C. Past accumulated error only
D. Nothing

Correct answer: B. The current error

56. The integral term helps eliminate:

A. Overshoot always
B. Steady-state error ✔
C. Sensors
D. All noise

Correct answer: B. Steady-state error

57. The derivative term helps to:

A. Increase steady-state error
B. Reduce overshoot by reacting to the rate of change ✔
C. Store data
D. Add power

Correct answer: B. Reduce overshoot by reacting to the rate of change

58. Mobile robots include:

A. Only PLCs
B. Only fixed arms
C. Wheeled, tracked and legged robots ✔
D. Only conveyors

Correct answer: C. Wheeled, tracked and legged robots

59. A differential drive robot steers by:

A. Varying the speed of its left and right wheels ✔
B. Using legs
C. Using propellers
D. Turning a steering wheel

Correct answer: A. Varying the speed of its left and right wheels

60. Odometry estimates position using:

A. Wi-Fi strength only
B. Star positions
C. Wheel encoder data over time ✔
D. GPS only

Correct answer: C. Wheel encoder data over time

61. Odometry errors accumulate because of:

A. Software updates
B. Colour changes
C. Perfect sensors
D. Wheel slip and measurement drift ✔

Correct answer: D. Wheel slip and measurement drift

62. SLAM stands for:

A. Sensor Linked Arm Motor
B. Simultaneous Localisation and Mapping ✔
C. Single Layer Automated Motion
D. Smart Laser Motion

Correct answer: B. Simultaneous Localisation and Mapping

63. SLAM allows a robot to:

A. Only charge
B. Only stand still
C. Only follow lines
D. Build a map while tracking its position within it ✔

Correct answer: D. Build a map while tracking its position within it

64. Path planning algorithms such as A* find:

A. Motor sizes
B. Robot colours
C. Battery levels
D. Efficient collision-free routes ✔

Correct answer: D. Efficient collision-free routes

65. Obstacle avoidance uses:

A. Only maps drawn by hand
B. Sensor data to steer around obstacles ✔
C. Only GPS
D. No sensors

Correct answer: B. Sensor data to steer around obstacles

66. Line-following robots typically use:

A. Ultrasonic only
B. Cameras only always
C. Infrared reflectance sensors ✔
D. GPS

Correct answer: C. Infrared reflectance sensors

67. ROS (Robot Operating System) is:

A. A programming language
B. An operating system like Windows
C. A robot brand
D. A framework of tools and libraries for robot software ✔

Correct answer: D. A framework of tools and libraries for robot software

68. In ROS, nodes are:

A. Cables
B. Batteries
C. Physical joints
D. Processes that perform computation ✔

Correct answer: D. Processes that perform computation

69. In ROS, topics are used for:

A. Drawing maps only
B. Storing files
C. Charging robots
D. Publishing and subscribing to messages between nodes ✔

Correct answer: D. Publishing and subscribing to messages between nodes

70. ROS services provide:

A. Hardware repair
B. Only streaming data
C. Request-response communication between nodes ✔
D. Battery management

Correct answer: C. Request-response communication between nodes

71. Gazebo is used for:

A. Hosting websites
B. Editing photos
C. Simulating robots in 3D environments ✔
D. Writing documents

Correct answer: C. Simulating robots in 3D environments

72. RViz is used to:

A. Compile programs
B. Design PCBs
C. Edit code
D. Visualise robot sensor data and state in ROS ✔

Correct answer: D. Visualise robot sensor data and state in ROS

73. Arduino is popular in robotics education because:

A. It has no I/O
B. It is a full PC
C. It is easy to program for controlling sensors and motors ✔
D. It runs Windows

Correct answer: C. It is easy to program for controlling sensors and motors

74. Raspberry Pi is used in robots for:

A. Only batteries
B. Only lights
C. Higher-level processing like vision and networking ✔
D. Only motor driving

Correct answer: C. Higher-level processing like vision and networking

75. Microcontrollers in robots handle:

A. Only spreadsheets
B. Only internet browsing
C. Only video editing
D. Real-time control of sensors and actuators ✔

Correct answer: D. Real-time control of sensors and actuators

Questions 76 to 100

76. Lithium-ion and LiPo batteries are used in robots because:

A. They offer high energy density ✔
B. They are heaviest
C. They never need care
D. They are cheapest always

Correct answer: A. They offer high energy density

77. End effectors include:

A. Only wheels
B. Only batteries
C. Grippers, suction cups, welding torches and tools ✔
D. Only cameras

Correct answer: C. Grippers, suction cups, welding torches and tools

78. Vacuum grippers are useful for:

A. Measuring heat
B. Picking flat or smooth objects ✔
C. Welding
D. Cutting metal

Correct answer: B. Picking flat or smooth objects

79. Collaborative robots (cobots) are designed to:

A. Operate only in cages
B. Ignore humans
C. Replace all workers
D. Work safely alongside humans ✔

Correct answer: D. Work safely alongside humans

80. Safety features for robots include:

A. Faster speeds
B. Emergency stops, safety zones and speed limiting ✔
C. Disabling sensors
D. Removing guards

Correct answer: B. Emergency stops, safety zones and speed limiting

81. ISO 10218 relates to:

A. Network security
B. Accounting
C. Food safety
D. Safety requirements for industrial robots ✔

Correct answer: D. Safety requirements for industrial robots

82. Applications of industrial robots include:

A. Only cooking at home
B. Only writing poetry
C. Welding, painting, assembly and material handling ✔
D. Only accounting

Correct answer: C. Welding, painting, assembly and material handling

83. Service robots include:

A. Only welding arms
B. Cleaning robots, delivery robots and surgical robots ✔
C. Only PLCs
D. Only conveyors

Correct answer: B. Cleaning robots, delivery robots and surgical robots

84. Autonomous vehicles are robots that use:

A. Only GPS
B. Perception, planning and control to drive without humans ✔
C. Only remote controls
D. Only steering wheels

Correct answer: B. Perception, planning and control to drive without humans

85. Drones are:

A. Robot arms
B. Underwater robots only
C. Computers
D. Aerial robots, often multirotor, used for imaging and delivery ✔

Correct answer: D. Aerial robots, often multirotor, used for imaging and delivery

86. Humanoid robots are designed to:

A. Resemble and move like humans ✔
B. Look like drones
C. Look like cars
D. Only weld

Correct answer: A. Resemble and move like humans

87. Reinforcement learning in robotics trains robots by:

A. Rewarding successful actions through trial and error ✔
B. Hard-coding every move only
C. Avoiding data
D. Copying files

Correct answer: A. Rewarding successful actions through trial and error

88. Computer vision tasks in robotics include:

A. Only audio mixing
B. Only payroll
C. Only colour printing
D. Object detection, tracking and pose estimation ✔

Correct answer: D. Object detection, tracking and pose estimation

89. OpenCV is a library used for:

A. Computer vision ✔
B. Web hosting
C. Accounting
D. Spreadsheets

Correct answer: A. Computer vision

90. Sensor fusion combines:

A. Two programs
B. Data from multiple sensors for better estimates ✔
C. Two robots
D. Two batteries

Correct answer: B. Data from multiple sensors for better estimates

91. The Kalman filter is used to:

A. Filter coffee
B. Estimate states by combining noisy measurements and predictions ✔
C. Compress images
D. Encrypt data

Correct answer: B. Estimate states by combining noisy measurements and predictions

92. Teleoperation means:

A. Robot self-repair
B. Fully autonomous control
C. Controlling a robot remotely by a human ✔
D. Robot charging

Correct answer: C. Controlling a robot remotely by a human

93. Ethical issues in robotics include:

A. Only colour choices
B. Safety, job impact, privacy and accountability ✔
C. Only battery size
D. Nothing

Correct answer: B. Safety, job impact, privacy and accountability

94. Robotics competitions like FIRST or RoboCup help students to:

A. Only shop
B. Only watch
C. Avoid learning
D. Learn engineering, programming and teamwork ✔

Correct answer: D. Learn engineering, programming and teamwork

95. The main goal of robotics is to:

A. Only store data
B. Only entertain
C. Replace all humans
D. Build machines that sense, decide and act to perform useful tasks ✔

Correct answer: D. Build machines that sense, decide and act to perform useful tasks

96. Payload capacity of a robot arm is:

A. Its speed only
B. The maximum load it can handle at the end effector ✔
C. Its battery capacity
D. Its software size

Correct answer: B. The maximum load it can handle at the end effector

97. Repeatability of a robot means:

A. How fast it moves
B. Its cost
C. How precisely it returns to the same position repeatedly ✔
D. Its colour

Correct answer: C. How precisely it returns to the same position repeatedly

98. A gripper’s grasp planning determines:

A. Motor colour
B. How and where to hold an object securely ✔
C. Battery usage
D. Map size

Correct answer: B. How and where to hold an object securely

99. Swarm robotics studies:

A. Only drones’ cameras
B. Coordinated behaviour of many simple robots ✔
C. Only humanoids
D. One large robot

Correct answer: B. Coordinated behaviour of many simple robots

100. Underwater robots (ROVs/AUVs) are used for:

A. Welding cars
B. Ocean exploration, inspection and research ✔
C. Cleaning floors
D. Cooking

Correct answer: B. Ocean exploration, inspection and research

How to Pass the Robotics Exam

  • Read every question carefully; most options look similar, so look for the most precise answer.
  • Revise the questions above topic by topic rather than memorising letters, because option order can change in the live test.
  • You need 80 correct answers out of 100 to pass, so aim to understand at least 85 to stay safe.
  • If you do not clear it on the first attempt, review the questions you missed and use the retake option.

Frequently Asked Questions

How many questions are in the Robotics Certification exam?

The exam has 100 multiple-choice questions, each worth 1 mark.

What is the passing score for the Robotics Certification?

You need at least 80% (80 out of 100) to pass and receive the certificate.

Can I retake the Robotics Certification exam?

Yes. If you score below 80%, you can retry the test after reviewing the topics.

Is the Itronix certificate verifiable?

Yes. Every certificate issued by Itronix Solutions has a unique ID that can be checked on the Itronix verify-certificate page.

More Engineering & CAD Certification Answers

Disclaimer: These answers are provided for learning and revision. Questions and answers are checked regularly; if you find a mistake, let us know in the comments.

About Priya Dogra

Priya Dogra runs priyadogra.com, where she shares free certification courses, internships, jobs, scholarships and exam preparation guides for Indian students and freshers. Follow her on YouTube, LinkedIn and Instagram for the latest opportunities.

Check Also

Unix/ Linux Certification exam answers 2026

Unix/ Linux Certification Exam Answers 2026 (All 100 Questions)

All 100 Unix/ Linux Certification exam questions with correct answers highlighted - updated 2026.

Leave a Reply

Your email address will not be published. Required fields are marked *