AutoCAD Certification exam answers 2026: This page lists all 100 questions of the official AutoCAD Certification exam by Itronix Solutions, each with its four answer options and the correct answer highlighted in green. Use it to revise every topic before you attempt the test and earn your verifiable certificate.
About this certification: AutoCAD is a computer-aided design (CAD) program used for 2-D and 3-D design and drafting.
| Certification | AutoCAD Certification |
| Provider | Itronix Solutions |
| Category | Engineering & CAD |
| Total questions | 100 multiple-choice questions |
| Marks | 1 mark per question (100 marks) |
| Passing score | 80% (80 out of 100) |
| Retake | Available if you do not pass |
| Certificate | Verifiable online certificate |
Take the exam: AutoCAD Certification on Itronix Solutions. See every other Itronix exam in our complete list of Itronix certification answers.
AutoCAD Exam Questions and Answers
Questions 1 to 25
1. A Polyline can be broken into individual lines and arcs using which of the following command?
Correct answer: A. EXPLODE
2. Is there any difference between Command Plot and Print?
Correct answer: A. No difference
3. In CAD, the LIMITS command allows you to determine the:
Correct answer: B. Size of the drawing space.
4. Which key can be used to quickly cancel a command?
Correct answer: B. esc
5. Autocad was developed by
Correct answer: C. Autodesk Inc.
6. Which AutoCAD command will determine precisely the volume of a complex (or simple) 3D Solid part?
Correct answer: D. MASSPROP
7. Which of the following is widely used to measure flood variability?
Correct answer: C. FFMI
8. The purpose of the UCSICON command is to:?
Correct answer: D. Permit a user to control the placement and appearance of the icon to help you understand your orientation in the XYZ coordinate system.
9. Which is the best option from the following how will you deselect an object while you are selecting a set of objects?
Correct answer: A. Shift + Click on the object to be removed
10. A polar array generate new objects____
Correct answer: A. In a circular pattern
11. Find the false statement in regards with "If an array is made associative".
Correct answer: B. The array can’t be modified in any way once it is made associative
12. An open area can be filled with which of the following gradient
Correct answer: B. Tolerance
13. What does the command Fillet do?
Correct answer: C. Curves an angle
14. When you type a second point by first moving the cursor to indicate direction and then entering a distance, you are using the ________
Correct answer: C. Direct Distance entry technique
15. The objects should be selected by ………… for stretching any object in AutoCAD?
Correct answer: D. Cross window selection method
16. Which of the following command in AutoCAD is used to create multiple viewports in the layout?
Correct answer: D. VPORTS
17. The primary purpose of the UCS (User Coordinate System) is?
Correct answer: A. Allows a user to draw on a specified 2D Plane in 3D space.
18. You apply a property called Thickness to a standard AutoCAD CIRCLE. What type of AutoCAD object do you now have officially?
Correct answer: A. Surface Model
19. The same CW angle measured is, if during the CCW measurement result gives an angle 135 degrees_____?
Correct answer: B. 135 degrees
20. What does associative hatch _____?
Correct answer: B. Monitors the changes in shape that fills
21. AutoCAD is developed by:
Correct answer: A. Autodesk
22. AutoCAD is mainly used for:
Correct answer: D. 2D drafting and 3D design
23. The native AutoCAD drawing file format is:
Correct answer: D. DWG
24. DXF files are used for:
Correct answer: B. Exchanging drawing data between CAD programs
25. The command to draw a straight line segment is:
Correct answer: B. LINE
Questions 26 to 50
26. The POLYLINE (PLINE) command creates:
Correct answer: D. A connected sequence of segments as a single object
27. The CIRCLE command can be defined by:
Correct answer: C. Center and radius, diameter, 2P, 3P or TTR
28. The RECTANG command draws:
Correct answer: B. A rectangle polyline
29. The ARC command draws:
Correct answer: B. A portion of a circle
30. The OFFSET command:
Correct answer: B. Creates parallel copies at a specified distance
31. The TRIM command:
Correct answer: B. Cuts objects at intersections with other objects
32. The EXTEND command:
Correct answer: A. Lengthens objects to meet other objects
33. The FILLET command:
Correct answer: B. Rounds corners with an arc of given radius
34. The CHAMFER command:
Correct answer: D. Bevels corners with straight lines
35. The MIRROR command:
Correct answer: C. Creates a reflected copy of objects
36. The ARRAY command creates:
Correct answer: D. Multiple copies in rectangular, polar or path patterns
37. The MOVE command:
Correct answer: D. Relocates objects to a new position
38. The COPY command:
Correct answer: A. Duplicates objects
39. The ROTATE command:
Correct answer: B. Turns objects around a base point
40. The SCALE command:
Correct answer: C. Enlarges or reduces objects proportionally
41. The STRETCH command:
Correct answer: D. Moves selected vertices to lengthen or shorten objects
42. The EXPLODE command:
Correct answer: A. Breaks compound objects into their components
43. The JOIN command:
Correct answer: C. Combines objects into a single object
44. The ERASE command:
Correct answer: C. Deletes selected objects
45. The UNDO command (Ctrl+Z):
Correct answer: C. Reverses the last action
46. Pressing Enter or Spacebar at the command line usually:
Correct answer: B. Repeats the last command or confirms input
47. Ortho mode (F8) restricts cursor movement to:
Correct answer: A. Horizontal and vertical directions
48. Object Snap (OSNAP, F3) lets you:
Correct answer: C. Snap precisely to points like endpoints and midpoints
49. Polar tracking (F10) helps to:
Correct answer: D. Draw at specified angle increments
50. Grid display is toggled with:
Correct answer: D. F7
Questions 51 to 75
51. Dynamic input (F12) shows:
Correct answer: D. Command input near the cursor
52. Absolute coordinates are entered as:
Correct answer: B. X,Y from the origin
53. Relative coordinates are entered with:
Correct answer: A. The @ symbol
54. Polar coordinates are entered as:
Correct answer: A. @distance<angle
55. Layers are used to:
Correct answer: B. Organise objects by type with shared properties
56. Layer properties include:
Correct answer: D. Colour, linetype, lineweight and visibility
57. Freezing a layer:
Correct answer: A. Hides it and excludes it from regeneration
58. Locking a layer:
Correct answer: D. Prevents objects on it from being edited
59. A block is:
Correct answer: C. A named group of objects that can be inserted repeatedly
60. The INSERT command:
Correct answer: D. Places a block into a drawing
61. Dynamic blocks allow:
Correct answer: A. Parameters and actions to change block geometry
62. Attributes in blocks store:
Correct answer: C. Text data such as part numbers
63. The HATCH command:
Correct answer: B. Fills an enclosed area with a pattern or solid fill
64. DIMLINEAR creates:
Correct answer: D. Horizontal or vertical linear dimensions
65. DIMALIGNED creates:
Correct answer: C. Dimensions aligned with an object’s angle
66. DIMRADIUS creates:
Correct answer: C. Radius dimensions for arcs and circles
67. Dimension styles control:
Correct answer: D. The appearance of dimensions
68. MTEXT creates:
Correct answer: B. Multiline formatted text
69. A leader (MLEADER) is used to:
Correct answer: B. Add notes with arrows pointing to features
70. Model space is used for:
Correct answer: D. Creating the actual geometry at full scale
71. Paper space (layout) is used for:
Correct answer: D. Arranging views and title blocks for printing
72. Viewports in a layout:
Correct answer: A. Display views of model space at a chosen scale
73. Annotative objects:
Correct answer: D. Scale automatically for different viewport scales
74. The PLOT command is used to:
Correct answer: A. Print or export drawings
75. Plot styles (CTB/STB) control:
Correct answer: C. How objects appear when plotted, such as lineweights
Questions 76 to 100
76. The LIMITS command sets:
Correct answer: A. The drawing area boundaries for grid display
77. UNITS command sets:
Correct answer: A. Drawing units and precision
78. ZOOM Extents shows:
Correct answer: A. All objects in the drawing
79. PAN lets you:
Correct answer: C. Move the view without changing zoom
80. REGEN:
Correct answer: B. Regenerates the drawing display
81. Properties palette (Ctrl+1) lets you:
Correct answer: C. View and edit object properties
82. MATCHPROP copies:
Correct answer: A. Properties from one object to others
83. Xrefs (external references) let you:
Correct answer: B. Attach other drawing files that update automatically
84. The PURGE command:
Correct answer: A. Removes unused items like blocks and layers
85. The AUDIT command:
Correct answer: D. Checks and fixes errors in a drawing
86. Templates (DWT) store:
Correct answer: A. Standard settings like layers, styles and title blocks
87. EXTRUDE in 3D:
Correct answer: A. Creates a solid by extending a 2D profile
88. REVOLVE in 3D:
Correct answer: B. Creates a solid by rotating a profile about an axis
89. UNION combines:
Correct answer: D. Multiple solids into one
90. SUBTRACT removes:
Correct answer: C. The volume of one solid from another
91. Visual styles control:
Correct answer: D. How 3D objects are displayed, e.g. wireframe or realistic
92. The UCS is:
Correct answer: D. The User Coordinate System that can be repositioned
93. AutoCAD LT differs from full AutoCAD mainly by:
Correct answer: D. Lacking advanced 3D and customisation features
94. Drawing standards help to:
Correct answer: B. Ensure consistent, readable technical drawings
95. AutoCAD Civil 3D is used for:
Correct answer: A. Civil engineering design such as roads, grading and surfaces
96. A surface in Civil 3D represents:
Correct answer: C. Terrain modelled from points or contours
97. Alignments in Civil 3D define:
Correct answer: C. Horizontal geometry of roads or pipelines
98. Profiles in Civil 3D show:
Correct answer: C. Vertical elevation along an alignment
99. Corridors in Civil 3D model:
Correct answer: A. 3D road designs from alignments, profiles and assemblies
100. The main purpose of AutoCAD is to:
Correct answer: B. Produce accurate technical drawings and designs
How to Pass the AutoCAD Exam
- Read every question carefully; most options look similar, so look for the most precise answer.
- Revise the questions above topic by topic rather than memorising letters, because option order can change in the live test.
- You need 80 correct answers out of 100 to pass, so aim to understand at least 85 to stay safe.
- If you do not clear it on the first attempt, review the questions you missed and use the retake option.
Frequently Asked Questions
How many questions are in the AutoCAD Certification exam?
The exam has 100 multiple-choice questions, each worth 1 mark.
What is the passing score for the AutoCAD Certification?
You need at least 80% (80 out of 100) to pass and receive the certificate.
Can I retake the AutoCAD Certification exam?
Yes. If you score below 80%, you can retry the test after reviewing the topics.
Is the Itronix certificate verifiable?
Yes. Every certificate issued by Itronix Solutions has a unique ID that can be checked on the Itronix verify-certificate page.
More Engineering & CAD Certification Answers
- ANSYS Structural Analysis Certification Exam Answers
- AutoCAD Civil 3D Certification Exam Answers
- Basics of Civil Engineering Certification Exam Answers
- CATIA – Computer Aided Design and Drafting Certification Exam Answers
- CNC Operator Certification Exam Answers
- MATLAB Certification Exam Answers
- PLC Programming Certiication Exam Answers
- Robotics Certification Exam Answers
Disclaimer: These answers are provided for learning and revision. Questions and answers are checked regularly; if you find a mistake, let us know in the comments.
Priya Dogra – Free Certifications, Exam Answers & Career Guides Free certification exam answers, courses, scholarships and career guides for learners worldwide