Wednesday , November 18 2026
Breaking News

VLSI Design Professional Certification Exam Answers 2026 (All 100 Questions)

VLSI Design Professional Certification exam answers 2026: This page lists all 100 questions of the official VLSI Design Professional Certification exam by Itronix Solutions, each with its four answer options and the correct answer highlighted in green. Use it to revise every topic before you attempt the test and earn your verifiable certificate.

About this certification: This certification focuses on Very Large Scale Integration (VLSI) design, covering chip architecture, logic design, and semiconductor technology. Ideal for electronics engineers, it prepares you for designing complex integrated circuits.

Certification VLSI Design Professional Certification
Provider Itronix Solutions
Category Electronics & Hardware
Total questions 100 multiple-choice questions
Marks 1 mark per question (100 marks)
Passing score 80% (80 out of 100)
Retake Available if you do not pass
Certificate Verifiable online certificate

Take the exam: VLSI Design Professional Certification on Itronix Solutions. See every other Itronix exam in our complete list of Itronix certification answers.

VLSI Design Exam Questions and Answers

Questions 1 to 25

1. What does VLSI stand for?

A. A) Very Low Signal Integration
B. B) Very Large System Integration
C. C) Very Large Scale Integration ✔
D. D) Verified Logic System Integration

Correct answer: C. C) Very Large Scale Integration

2. Which technology is commonly used for VLSI fabrication?

A. A) CMOS (Complementary Metal-Oxide-Semiconductor) ✔
B. B) TTL (Transistor-Transistor Logic)
C. C) BJT (Bipolar Junction Transistor)
D. D) MOSFET

Correct answer: A. A) CMOS (Complementary Metal-Oxide-Semiconductor)

3. What is the primary advantage of using CMOS technology in VLSI design?

A. A) High power consumption
B. B) Large size
C. C) Slow operation
D. D) Low power consumption ✔

Correct answer: D. D) Low power consumption

4. What does ASIC stand for in VLSI design?

A. A) Application-Specific Integrated Circuit ✔
B. B) Analog Signal Integrated Circuit
C. C) Automated Semiconductor Integrated Circuit
D. D) Advanced Signal Integrated Circuit

Correct answer: A. A) Application-Specific Integrated Circuit

5. In MOSFETs, what controls the flow of current between the source and drain?

A. A) Substrate
B. B) Oxide Layer
C. C) Metal Layer
D. D) Gate ✔

Correct answer: D. D) Gate

6. What is the primary function of a flip-flop in a digital circuit?

A. A) To perform arithmetic operations
B. B) To regulate clock signals
C. C) To reduce power consumption
D. D) To store binary data ✔

Correct answer: D. D) To store binary data

7. What type of logic gate produces a HIGH output only when all inputs are HIGH?

A. A) AND ✔
B. B) OR
C. C) NOR
D. D) XOR

Correct answer: A. A) AND

8. What is the purpose of a clock signal in a synchronous digital circuit?

A. A) To store data
B. B) To reduce power consumption
C. C) To synchronize operations ✔
D. D) To generate signals

Correct answer: C. C) To synchronize operations

9. Which type of memory is used in VLSI design for high-speed data access?

A. A) SRAM (Static Random-Access Memory) ✔
B. B) ROM
C. C) Flash Memory
D. D) EEPROM

Correct answer: A. A) SRAM (Static Random-Access Memory)

10. What does HDL stand for in VLSI design?

A. A) Hardware Description Language ✔
B. B) High-Density Logic
C. C) Hardware Design Language
D. D) High-Definition Logic

Correct answer: A. A) Hardware Description Language

11. Which of the following is an example of an HDL used for VLSI design?

A. A) Verilog ✔
B. B) Python
C. C) HTML
D. D) Java

Correct answer: A. A) Verilog

12. What is the function of a multiplexer in a digital circuit?

A. A) To store data
B. B) To amplify signals
C. C) To select one input from multiple inputs ✔
D. D) To convert signals

Correct answer: C. C) To select one input from multiple inputs

13. What is the purpose of the layout design step in VLSI?

A. A) To simulate the circuit
B. B) To create a physical representation of the circuit ✔
C. C) To verify logic
D. D) To test power consumption

Correct answer: B. B) To create a physical representation of the circuit

14. What is the function of an inverter in a digital circuit?

A. A) To reverse the input signal ✔
B. B) To store data
C. C) To amplify signals
D. D) To convert analog to digital

Correct answer: A. A) To reverse the input signal

15. What is the full form of FPGA in VLSI design?

A. A) Full Programmable Gate Array
B. B) Fixed Programmable Gate Array
C. C) Field Programmable Gate Array ✔
D. D) Fast Processing Gate Array

Correct answer: C. C) Field Programmable Gate Array

16. What is the main advantage of using an FPGA over an ASIC?

A. A) Lower power consumption
B. B) Faster processing speed
C. C) Reconfigurability ✔
D. D) Permanent circuit design

Correct answer: C. C) Reconfigurability

17. What is the role of parasitic capacitance in VLSI circuits?

A. A) Enhances signal strength
B. B) Affects signal propagation and speed ✔
C. C) Improves clock frequency
D. D) Reduces signal noise

Correct answer: B. B) Affects signal propagation and speed

18. What is the primary disadvantage of dynamic logic in VLSI design?

A. A) High speed
B. B) Simple design
C. C) Susceptibility to noise ✔
D. D) Low power consumption

Correct answer: C. C) Susceptibility to noise

19. What is the function of a latch in a digital circuit?

A. A) To generate clock signals
B. B) To amplify signals
C. C) To store a single bit of data ✔
D. D) To convert signals

Correct answer: C. C) To store a single bit of data

20. What is meant by "scaling" in VLSI technology?

A. A) Increasing chip size
B. B) Increasing clock frequency
C. C) Reducing transistor size to improve performance ✔
D. D) Reducing power consumption

Correct answer: C. C) Reducing transistor size to improve performance

21. VLSI stands for:

A. Virtual Layout Silicon Interconnect
B. Very Large Scale Integration ✔
C. Vector Logic Signal Input
D. Variable Logic System Interface

Correct answer: B. Very Large Scale Integration

22. VLSI refers to:

A. Building large circuit boards only
B. Integrating millions or billions of transistors on a single chip ✔
C. Designing websites
D. Assembling computers

Correct answer: B. Integrating millions or billions of transistors on a single chip

23. CMOS stands for:

A. Complementary Metal-Oxide-Semiconductor ✔
B. Central Memory Operating System
C. Computer Main Output Switch
D. Common Mode Signal

Correct answer: A. Complementary Metal-Oxide-Semiconductor

24. CMOS logic is popular because of:

A. Low static power consumption ✔
B. Very high static power
C. Analogue only operation
D. No transistors

Correct answer: A. Low static power consumption

25. A MOSFET is:

A. A resistor
B. A diode only
C. A capacitor
D. A field-effect transistor used as a switch or amplifier ✔

Correct answer: D. A field-effect transistor used as a switch or amplifier

Questions 26 to 50

26. An NMOS transistor conducts when:

A. Always
B. It is unpowered
C. Its gate voltage is high relative to the source ✔
D. Its gate is low

Correct answer: C. Its gate voltage is high relative to the source

27. A PMOS transistor conducts when:

A. Its gate is high
B. Its gate voltage is low relative to the source ✔
C. Never
D. It is unpowered

Correct answer: B. Its gate voltage is low relative to the source

28. A CMOS inverter uses:

A. Two resistors
B. One PMOS and one NMOS transistor ✔
C. Only NMOS
D. Only diodes

Correct answer: B. One PMOS and one NMOS transistor

29. Moore’s Law observed that:

A. Prices never change
B. Chips get slower
C. Power doubles daily
D. Transistor counts on chips roughly double every two years ✔

Correct answer: D. Transistor counts on chips roughly double every two years

30. Technology node (e.g. 5 nm) refers to:

A. Clock speed
B. The process generation of semiconductor manufacturing ✔
C. Package size
D. Chip price

Correct answer: B. The process generation of semiconductor manufacturing

31. Digital logic gates include:

A. Read and write only
B. Open and close
C. AND, OR, NOT, NAND, NOR, XOR and XNOR ✔
D. Add and subtract only

Correct answer: C. AND, OR, NOT, NAND, NOR, XOR and XNOR

32. NAND and NOR are called universal gates because:

A. They are cheapest only
B. They store data
C. Any logic function can be built from them alone ✔
D. They are fastest

Correct answer: C. Any logic function can be built from them alone

33. An XOR gate outputs 1 when:

A. Always
B. Inputs are different ✔
C. Both inputs are 1
D. Both inputs are 0

Correct answer: B. Inputs are different

34. Boolean algebra is used to:

A. Simplify and analyse logic circuits ✔
B. Design buildings
C. Write SQL
D. Edit images

Correct answer: A. Simplify and analyse logic circuits

35. A Karnaugh map is used to:

A. Store data
B. Simplify Boolean expressions ✔
C. Simulate analogue circuits
D. Route PCBs

Correct answer: B. Simplify Boolean expressions

36. Combinational logic outputs depend on:

A. Clock only
B. Power only
C. Current inputs only ✔
D. Past inputs and state

Correct answer: C. Current inputs only

37. Sequential logic outputs depend on:

A. Current inputs only
B. Current inputs and stored state ✔
C. Power only
D. Nothing

Correct answer: B. Current inputs and stored state

38. A multiplexer:

A. Inverts signals only
B. Adds numbers
C. Stores data
D. Selects one of several inputs to the output ✔

Correct answer: D. Selects one of several inputs to the output

39. A decoder:

A. Converts binary input into one active output line ✔
B. Selects inputs
C. Stores bits
D. Adds numbers

Correct answer: A. Converts binary input into one active output line

40. A half adder adds:

A. Two single bits producing sum and carry ✔
B. Decimal digits
C. Three bits
D. Two bytes

Correct answer: A. Two single bits producing sum and carry

41. A full adder adds:

A. Bytes only
B. Two bits plus a carry-in ✔
C. Four bits
D. Only two bits

Correct answer: B. Two bits plus a carry-in

42. A flip-flop is:

A. A resistor
B. A bus
C. A gate with no memory
D. A basic memory element storing one bit ✔

Correct answer: D. A basic memory element storing one bit

43. A D flip-flop captures:

A. The input value at the clock edge ✔
B. Only ones
C. Random values
D. Only zeros

Correct answer: A. The input value at the clock edge

44. A register is:

A. A group of flip-flops storing a multi-bit value ✔
B. A single gate
C. A wire
D. A resistor

Correct answer: A. A group of flip-flops storing a multi-bit value

45. A counter is:

A. A sequential circuit that cycles through states ✔
B. A combinational adder
C. A multiplexer
D. A memory chip only

Correct answer: A. A sequential circuit that cycles through states

46. A finite state machine (FSM) consists of:

A. States, transitions and outputs ✔
B. Only memory
C. Only clocks
D. Only gates

Correct answer: A. States, transitions and outputs

47. Moore machine outputs depend on:

A. Both state and inputs
B. The current state only ✔
C. Nothing
D. Inputs only

Correct answer: B. The current state only

48. Mealy machine outputs depend on:

A. Current state and inputs ✔
B. State only
C. Clock only
D. Nothing

Correct answer: A. Current state and inputs

49. Setup time is:

A. The time data must be stable before the clock edge ✔
B. Time after the edge
C. Power-on time
D. Clock period

Correct answer: A. The time data must be stable before the clock edge

50. Hold time is:

A. Time before the edge
B. The time data must remain stable after the clock edge ✔
C. Reset time
D. Clock frequency

Correct answer: B. The time data must remain stable after the clock edge

Questions 51 to 75

51. Clock skew is:

A. Clock frequency
B. Difference in clock arrival times at different flip-flops ✔
C. Data width
D. Power supply noise

Correct answer: B. Difference in clock arrival times at different flip-flops

52. Metastability can occur when:

A. Circuits are combinational
B. Clocks are perfect
C. Power is off
D. Setup or hold times are violated, e.g. at asynchronous inputs ✔

Correct answer: D. Setup or hold times are violated, e.g. at asynchronous inputs

53. Synchronisers (two flip-flops) are used to:

A. Store large data
B. Reduce metastability when crossing clock domains ✔
C. Generate clocks
D. Increase power

Correct answer: B. Reduce metastability when crossing clock domains

54. HDL stands for:

A. High Density Logic
B. Host Data Link
C. Hardware Description Language ✔
D. Hardware Design Layout

Correct answer: C. Hardware Description Language

55. Common HDLs include:

A. SQL and NoSQL
B. HTML and CSS
C. Verilog, SystemVerilog and VHDL ✔
D. Python and Java

Correct answer: C. Verilog, SystemVerilog and VHDL

56. RTL stands for:

A. Register Transfer Level ✔
B. Routing Track Length
C. Resistor Transistor Layout
D. Real Time Logic

Correct answer: A. Register Transfer Level

57. Synthesis converts:

A. Images into code
B. Netlists into RTL
C. RTL code into a gate-level netlist ✔
D. Software into hardware manuals

Correct answer: C. RTL code into a gate-level netlist

58. In Verilog, a module is:

A. The basic building block describing hardware ✔
B. A testbench only
C. A software function only
D. A memory chip

Correct answer: A. The basic building block describing hardware

59. In Verilog, always @(posedge clk) describes:

A. An initial block
B. Combinational logic only
C. A wire
D. Logic triggered on the rising clock edge ✔

Correct answer: D. Logic triggered on the rising clock edge

60. Non-blocking assignment (<=) in Verilog is used for:

A. Comments
B. Constants
C. Combinational logic only
D. Sequential logic ✔

Correct answer: D. Sequential logic

61. Blocking assignment (=) in Verilog is typically used for:

A. Clocks
B. Resets only
C. Sequential flip-flops
D. Combinational logic ✔

Correct answer: D. Combinational logic

62. A testbench is used to:

A. Fabricate chips
B. Simulate and verify a design ✔
C. Synthesise hardware
D. Route PCBs

Correct answer: B. Simulate and verify a design

63. Functional verification checks:

A. Price
B. That the design behaves according to specification ✔
C. Package size
D. Chip colour

Correct answer: B. That the design behaves according to specification

64. UVM is:

A. A PCB format
B. A synthesis tool
C. A CPU
D. A verification methodology for SystemVerilog ✔

Correct answer: D. A verification methodology for SystemVerilog

65. Static Timing Analysis checks:

A. Whether timing constraints are met without simulation ✔
B. Power only
C. Logic functionality only
D. Layout colours

Correct answer: A. Whether timing constraints are met without simulation

66. The ASIC design flow includes:

A. Only coding
B. Specification, RTL, verification, synthesis, place and route, and sign-off ✔
C. Only packaging
D. Only testing

Correct answer: B. Specification, RTL, verification, synthesis, place and route, and sign-off

67. ASIC stands for:

A. Advanced System Integrated Chip
B. Application-Specific Integrated Circuit ✔
C. Analogue Signal IC
D. Automatic Silicon Interconnect

Correct answer: B. Application-Specific Integrated Circuit

68. An FPGA is:

A. A reprogrammable integrated circuit made of configurable logic blocks ✔
B. A microcontroller only
C. A memory chip
D. A fixed-function ASIC

Correct answer: A. A reprogrammable integrated circuit made of configurable logic blocks

69. FPGAs are configured using:

A. Assembly language only
B. Firmware updates over Wi-Fi only
C. Only analogue settings
D. A bitstream generated from HDL ✔

Correct answer: D. A bitstream generated from HDL

70. LUTs in FPGAs implement:

A. Analogue filters
B. Combinational logic functions ✔
C. Memory only
D. Clocks

Correct answer: B. Combinational logic functions

71. FPGA vendors include:

A. Cisco and Juniper
B. Oracle and SAP
C. AMD (Xilinx) and Intel (Altera) ✔
D. Adobe and Autodesk

Correct answer: C. AMD (Xilinx) and Intel (Altera)

72. Vivado and Quartus are:

A. PCB tools
B. FPGA design tools ✔
C. Word processors
D. Databases

Correct answer: B. FPGA design tools

73. Advantages of FPGAs over ASICs include:

A. Lower unit cost at high volume
B. Reconfigurability and faster time to market ✔
C. Smaller size always
D. Lower power always

Correct answer: B. Reconfigurability and faster time to market

74. Place and route determines:

A. Software features
B. Package colour
C. Physical location of cells and wiring between them ✔
D. Test cases

Correct answer: C. Physical location of cells and wiring between them

75. DRC (Design Rule Check) verifies:

A. Layout meets manufacturing rules ✔
B. Power only
C. Logic functionality
D. Timing only

Correct answer: A. Layout meets manufacturing rules

Questions 76 to 100

76. LVS (Layout Versus Schematic) checks:

A. Timing
B. That the layout matches the schematic netlist ✔
C. Power
D. Temperature

Correct answer: B. That the layout matches the schematic netlist

77. Dynamic power in CMOS is proportional to:

A. Only leakage
B. Only area
C. Only temperature
D. Capacitance, voltage squared and frequency ✔

Correct answer: D. Capacitance, voltage squared and frequency

78. Clock gating reduces:

A. Leakage only
B. Dynamic power by disabling clocks to idle logic ✔
C. Frequency always
D. Area

Correct answer: B. Dynamic power by disabling clocks to idle logic

79. DFT stands for:

A. Digital Fourier Transform only
B. Data Flow Timing
C. Device Fabrication Technique
D. Design for Testability ✔

Correct answer: D. Design for Testability

80. Scan chains are used to:

A. Increase clock speed
B. Improve testability of sequential logic ✔
C. Reduce area
D. Store data

Correct answer: B. Improve testability of sequential logic

81. Computer architecture describes:

A. Only networking
B. Only the OS
C. Only the case design
D. The structure and behaviour of a computer system as seen by programmers ✔

Correct answer: D. The structure and behaviour of a computer system as seen by programmers

82. The von Neumann architecture uses:

A. No memory
B. Separate memories for instructions and data
C. Only registers
D. A shared memory for instructions and data ✔

Correct answer: D. A shared memory for instructions and data

83. The Harvard architecture uses:

A. A single shared memory
B. Separate memories for instructions and data ✔
C. Only cache
D. No memory

Correct answer: B. Separate memories for instructions and data

84. The ALU performs:

A. Input/output
B. Arithmetic and logical operations ✔
C. Clock generation
D. Memory storage

Correct answer: B. Arithmetic and logical operations

85. The control unit:

A. Directs the operation of the processor ✔
B. Stores data
C. Displays output
D. Performs arithmetic only

Correct answer: A. Directs the operation of the processor

86. Pipelining improves:

A. Memory size
B. Latency of a single instruction always
C. Power always
D. Instruction throughput by overlapping stages ✔

Correct answer: D. Instruction throughput by overlapping stages

87. A pipeline hazard is:

A. A situation that prevents the next instruction from executing in its cycle ✔
B. A power failure
C. A faster clock
D. A cache hit

Correct answer: A. A situation that prevents the next instruction from executing in its cycle

88. Cache memory is:

A. A hard disk
B. Small, fast memory close to the CPU ✔
C. A network
D. Large slow storage

Correct answer: B. Small, fast memory close to the CPU

89. A cache hit means:

A. Memory is full
B. Data is not in cache
C. Requested data is found in the cache ✔
D. The CPU stops

Correct answer: C. Requested data is found in the cache

90. RISC architectures emphasise:

A. Only microcode
B. Simple instructions executed quickly ✔
C. Complex variable-length instructions
D. No registers

Correct answer: B. Simple instructions executed quickly

91. ARM and RISC-V are examples of:

A. RISC instruction set architectures ✔
B. CISC only
C. GPUs
D. Memory types

Correct answer: A. RISC instruction set architectures

92. x86 is generally classified as:

A. Analogue
B. RISC
C. VLIW only
D. CISC ✔

Correct answer: D. CISC

93. Hardware security threats include:

A. Side-channel attacks, hardware Trojans and fault injection ✔
B. Only weak passwords
C. Only phishing emails
D. Only spam

Correct answer: A. Side-channel attacks, hardware Trojans and fault injection

94. A side-channel attack exploits:

A. Physical leakage such as power use, timing or electromagnetic emissions ✔
B. User passwords only
C. Network ports only
D. Software bugs only

Correct answer: A. Physical leakage such as power use, timing or electromagnetic emissions

95. A hardware Trojan is:

A. A firewall
B. A software virus
C. A secure chip
D. A malicious modification to circuitry ✔

Correct answer: D. A malicious modification to circuitry

96. A TPM (Trusted Platform Module) provides:

A. Wi-Fi
B. Faster graphics
C. Secure key storage and platform integrity measurement ✔
D. More RAM

Correct answer: C. Secure key storage and platform integrity measurement

97. PCB design involves:

A. Only coding
B. Only software testing
C. Only casing design
D. Schematic capture, component placement and routing traces ✔

Correct answer: D. Schematic capture, component placement and routing traces

98. Gerber files are used to:

A. Write firmware
B. Program FPGAs
C. Store schematics only
D. Manufacture PCBs ✔

Correct answer: D. Manufacture PCBs

99. The main aim of digital hardware design is to:

A. Manage databases
B. Write web pages
C. Edit photos
D. Create reliable, efficient circuits that meet functional, timing and power goals ✔

Correct answer: D. Create reliable, efficient circuits that meet functional, timing and power goals

100. A wafer in semiconductor manufacturing is:

A. A thin slice of silicon on which chips are fabricated ✔
B. A package
C. A test program
D. A PCB

Correct answer: A. A thin slice of silicon on which chips are fabricated

How to Pass the VLSI Design Exam

  • Read every question carefully; most options look similar, so look for the most precise answer.
  • Revise the questions above topic by topic rather than memorising letters, because option order can change in the live test.
  • You need 80 correct answers out of 100 to pass, so aim to understand at least 85 to stay safe.
  • If you do not clear it on the first attempt, review the questions you missed and use the retake option.

Frequently Asked Questions

How many questions are in the VLSI Design Professional Certification exam?

The exam has 100 multiple-choice questions, each worth 1 mark.

What is the passing score for the VLSI Design Professional Certification?

You need at least 80% (80 out of 100) to pass and receive the certificate.

Can I retake the VLSI Design Professional Certification exam?

Yes. If you score below 80%, you can retry the test after reviewing the topics.

Is the Itronix certificate verifiable?

Yes. Every certificate issued by Itronix Solutions has a unique ID that can be checked on the Itronix verify-certificate page.

More Electronics & Hardware Certification Answers

Disclaimer: These answers are provided for learning and revision. Questions and answers are checked regularly; if you find a mistake, let us know in the comments.

About Priya Dogra

Priya Dogra runs priyadogra.com, where she shares free certification courses, internships, jobs, scholarships and exam preparation guides for Indian students and freshers. Follow her on YouTube, LinkedIn and Instagram for the latest opportunities.

Check Also

Tally ERP Professional Certification exam answers 2026

Tally ERP Professional Certification Exam Answers 2026 (All 100 Questions)

All 100 Tally ERP Professional Certification exam questions with correct answers highlighted - updated 2026.

Leave a Reply

Your email address will not be published. Required fields are marked *