Wednesday , November 18 2026
Breaking News

Embedded Systems Design Professional Certification Exam Answers 2026 (All 100 Questions)

Embedded Systems Design Professional Certification exam answers 2026: This page lists all 100 questions of the official Embedded Systems Design Professional Certification exam by Itronix Solutions, each with its four answer options and the correct answer highlighted in green. Use it to revise every topic before you attempt the test and earn your verifiable certificate.

About this certification: This certification teaches microcontroller programming, real-time operating systems (RTOS), and hardware-software integration. You’ll learn to design embedded systems for automation and control applications.

Certification Embedded Systems Design Professional Certification
Provider Itronix Solutions
Category Electronics & Hardware
Total questions 100 multiple-choice questions
Marks 1 mark per question (100 marks)
Passing score 80% (80 out of 100)
Retake Available if you do not pass
Certificate Verifiable online certificate

Take the exam: Embedded Systems Design Professional Certification on Itronix Solutions. See every other Itronix exam in our complete list of Itronix certification answers.

Embedded Systems Design Exam Questions and Answers

Questions 1 to 25

1. 14. What is the function of a pulse-width modulation (PWM) signal in an embedded system?

A. A) Synchronize data transmission
B. B) Control the duty cycle of a signal ✔
C. C) Increase clock speed
D. D) Reset the system

Correct answer: B. B) Control the duty cycle of a signal

2. 15. Which of the following is a real-time constraint in embedded systems?

A. A) Unlimited processing time
B. B) Fixed response time ✔
C. C) Variable memory allocation
D. D) Unlimited data storage

Correct answer: B. B) Fixed response time

3. 16. What is the purpose of DMA (Direct Memory Access) in an embedded system?

A. A) To transfer data directly between memory and peripherals without CPU involvement ✔
B. B) To execute instructions faster
C. C) To increase clock speed
D. D) To manage interrupts

Correct answer: A. A) To transfer data directly between memory and peripherals without CPU involvement

4. 17. Which microcontroller component generates the system clock signal?

A. A) CPU
B. B) GPIO
C. C) Crystal Oscillator ✔
D. D) Timer

Correct answer: C. C) Crystal Oscillator

5. 18. What is the role of a bootloader in an embedded system?

A. A) Manage power consumption
B. B) Load the operating system or firmware ✔
C. C) Handle input-output operations
D. D) Store user data

Correct answer: B. B) Load the operating system or firmware

6. 19. What type of operating system is typically used in embedded systems?

A. A) Multiprocessing OS
B. B) Real-Time Operating System (RTOS) ✔
C. C) Distributed OS
D. D) Cloud-based OS

Correct answer: B. B) Real-Time Operating System (RTOS)

7. 20. What is the purpose of a UART (Universal Asynchronous Receiver/Transmitter) in an embedded system?

A. A) To enable serial communication ✔
B. B) To generate clock signals
C. C) To store data
D. D) To handle interrupts

Correct answer: A. A) To enable serial communication

8. 1. What is an embedded system?

A. A) A standalone computer
B. B) A system designed to perform a specific task within a larger system ✔
C. C) A multipurpose device
D. D) A general-purpose operating system

Correct answer: B. B) A system designed to perform a specific task within a larger system

9. 2. Which programming language is most commonly used for embedded systems?

A. A) Python
B. B) Java
C. C) C ✔
D. D) HTML

Correct answer: C. C) C

10. 3. What type of memory is typically used to store firmware in embedded systems?

A. A) RAM
B. B) ROM ✔
C. C) Cache
D. D) Register

Correct answer: B. B) ROM

11. 4. Which microcontroller feature allows it to handle multiple tasks simultaneously?

A. A) Memory
B. B) Timer
C. C) Interrupts ✔
D. D) Clock

Correct answer: C. C) Interrupts

12. 5. What is the role of a watchdog timer in an embedded system?

A. A) To keep track of system uptime
B. B) To provide a clock signal
C. C) To synchronize data transmission
D. D) To reset the system if it becomes unresponsive ✔

Correct answer: D. D) To reset the system if it becomes unresponsive

13. 6. Which communication protocol is commonly used for short-distance communication in embedded systems?

A. A) HTTP
B. B) TCP/IP
C. C) FTP
D. D) I2C ✔

Correct answer: D. D) I2C

14. 7. What does RTOS stand for?

A. A) Remote Terminal Operating System
B. B) Real-Time Output System
C. C) Real-Time Operating System ✔
D. D) Real-Time Open Source

Correct answer: C. C) Real-Time Operating System

15. 8. Which type of memory is non-volatile and can be erased and reprogrammed?

A. A) Flash Memory ✔
B. B) SRAM
C. C) DRAM
D. D) Cache

Correct answer: A. A) Flash Memory

16. 9. What is the primary purpose of an ADC (Analog-to-Digital Converter) in embedded systems?

A. A) Convert digital signals to analog signals
B. B) Transfer data
C. C) Store data
D. D) Convert analog signals to digital signals ✔

Correct answer: D. D) Convert analog signals to digital signals

17. 10. Which bus is commonly used for high-speed data transfer in embedded systems?

A. A) UART
B. B) SPI (Serial Peripheral Interface) ✔
C. C) I2C
D. D) HTTP

Correct answer: B. B) SPI (Serial Peripheral Interface)

18. 11. What is the function of a GPIO pin in a microcontroller?

A. A) To allow input and output operations ✔
B. B) To provide memory storage
C. C) To manage power consumption
D. D) To execute instructions

Correct answer: A. A) To allow input and output operations

19. 12. Which embedded system architecture separates data and instruction memory?

A. A) Harvard Architecture
B. B) RISC Architecture
C. C) Von Neumann Architecture ✔
D. D) CISC Architecture

Correct answer: C. C) Von Neumann Architecture

20. 13. Which type of signal is typically processed by an embedded system’s ADC?

A. A) Analog ✔
B. B) Digital
C. C) Binary
D. D) Clock

Correct answer: A. A) Analog

21. An embedded system is:

A. A cloud server only
B. A computer system designed for a dedicated function within a larger device ✔
C. A web browser
D. A general-purpose desktop

Correct answer: B. A computer system designed for a dedicated function within a larger device

22. Examples of embedded systems include:

A. Spreadsheets
B. Washing machine controllers, car ECUs and smart meters ✔
C. Web browsers
D. Office suites

Correct answer: B. Washing machine controllers, car ECUs and smart meters

23. A microcontroller integrates:

A. CPU, memory and peripherals on a single chip ✔
B. Only a CPU
C. Only memory
D. Only a display

Correct answer: A. CPU, memory and peripherals on a single chip

24. A microprocessor typically:

A. Contains the CPU and needs external memory and peripherals ✔
B. Includes all peripherals always
C. Is a sensor
D. Has no CPU

Correct answer: A. Contains the CPU and needs external memory and peripherals

25. Popular microcontroller families include:

A. NVIDIA RTX
B. Snapdragon modems only
C. Intel Core i9 only
D. AVR, PIC, ARM Cortex-M and ESP32 ✔

Correct answer: D. AVR, PIC, ARM Cortex-M and ESP32

Questions 26 to 50

26. Arduino Uno is based on the:

A. Intel 8086
B. Raspberry Pi CPU
C. ATmega328P microcontroller ✔
D. ESP32

Correct answer: C. ATmega328P microcontroller

27. Raspberry Pi is best described as:

A. A microcontroller without an OS
B. A single-board computer that runs Linux ✔
C. A router
D. A sensor

Correct answer: B. A single-board computer that runs Linux

28. ESP32 is popular for IoT because it has:

A. No connectivity
B. Built-in Wi-Fi and Bluetooth ✔
C. A GPU for gaming
D. A hard disk

Correct answer: B. Built-in Wi-Fi and Bluetooth

29. Firmware is:

A. A hardware casing
B. A web page
C. A cloud service
D. Software programmed into the device’s non-volatile memory ✔

Correct answer: D. Software programmed into the device’s non-volatile memory

30. Embedded C is widely used because:

A. It is only for web
B. It offers low-level hardware control with efficiency ✔
C. It needs a browser
D. It cannot access hardware

Correct answer: B. It offers low-level hardware control with efficiency

31. Flash memory in microcontrollers stores:

A. Nothing
B. Only images
C. Program code that persists without power ✔
D. Temporary variables only

Correct answer: C. Program code that persists without power

32. SRAM in microcontrollers stores:

A. Bootloaders only
B. Nothing
C. Runtime variables and the stack ✔
D. Program code permanently

Correct answer: C. Runtime variables and the stack

33. EEPROM is used to:

A. Display text
B. Store small amounts of non-volatile data like settings ✔
C. Run code fast
D. Act as a CPU

Correct answer: B. Store small amounts of non-volatile data like settings

34. GPIO stands for:

A. General Purpose Input/Output ✔
B. Global Program Input Output
C. General Power Interface Option
D. Graphics Processing I/O

Correct answer: A. General Purpose Input/Output

35. A GPIO pin configured as output can:

A. Generate Wi-Fi
B. Drive an LED or relay ✔
C. Store data
D. Measure analogue voltage directly

Correct answer: B. Drive an LED or relay

36. A pull-up resistor ensures:

A. More current
B. Faster clocks
C. An input pin reads a defined high level when not driven ✔
D. The pin is always low

Correct answer: C. An input pin reads a defined high level when not driven

37. An ADC converts:

A. Digital to analogue
B. Analogue signals into digital values ✔
C. Light to sound
D. Power to data

Correct answer: B. Analogue signals into digital values

38. A DAC converts:

A. Data to light
B. AC to DC
C. Analogue to digital
D. Digital values into analogue signals ✔

Correct answer: D. Digital values into analogue signals

39. ADC resolution of 10 bits gives:

A. 1024 levels ✔
B. 100 levels
C. 10 levels
D. 256 levels

Correct answer: A. 1024 levels

40. PWM stands for:

A. Pulse Width Modulation ✔
B. Peripheral Write Memory
C. Power Wave Monitor
D. Programmed Wire Mode

Correct answer: A. Pulse Width Modulation

41. PWM is commonly used to:

A. Send Wi-Fi
B. Control motor speed or LED brightness ✔
C. Read sensors only
D. Store data

Correct answer: B. Control motor speed or LED brightness

42. Duty cycle in PWM is:

A. The voltage level
B. The number of pins
C. The frequency
D. The percentage of time the signal is high ✔

Correct answer: D. The percentage of time the signal is high

43. UART is:

A. A serial communication protocol using TX and RX lines ✔
B. A memory type
C. A parallel bus
D. A wireless standard

Correct answer: A. A serial communication protocol using TX and RX lines

44. I2C uses:

A. Two wires: SDA and SCL ✔
B. Four wires always
C. One wire only
D. Wireless only

Correct answer: A. Two wires: SDA and SCL

45. SPI typically uses:

A. MOSI, MISO, SCK and chip select lines ✔
B. Only SDA and SCL
C. One wire
D. Radio waves

Correct answer: A. MOSI, MISO, SCK and chip select lines

46. CAN bus is widely used in:

A. Automotive and industrial systems ✔
B. Smartphones only
C. Printers only
D. Home Wi-Fi

Correct answer: A. Automotive and industrial systems

47. An interrupt allows:

A. Memory to be erased
B. The processor to respond immediately to events ✔
C. Power to turn off
D. The program to stop permanently

Correct answer: B. The processor to respond immediately to events

48. An ISR is:

A. An Interrupt Service Routine that handles an interrupt ✔
B. A sensor
C. A memory chip
D. A protocol

Correct answer: A. An Interrupt Service Routine that handles an interrupt

49. Polling means:

A. Repeatedly checking a device’s status in a loop ✔
B. Using interrupts
C. Using DMA
D. Sleeping forever

Correct answer: A. Repeatedly checking a device’s status in a loop

50. A timer peripheral can be used to:

A. Store programs
B. Generate delays, measure time and create PWM ✔
C. Display images
D. Connect Wi-Fi

Correct answer: B. Generate delays, measure time and create PWM

Questions 51 to 75

51. A watchdog timer:

A. Measures temperature
B. Resets the system if software stops responding ✔
C. Controls displays
D. Stores data

Correct answer: B. Resets the system if software stops responding

52. An RTOS provides:

A. Web browsing
B. A graphical desktop
C. Spreadsheets
D. Deterministic task scheduling for real-time applications ✔

Correct answer: D. Deterministic task scheduling for real-time applications

53. FreeRTOS is:

A. A microcontroller
B. A popular open-source real-time operating system ✔
C. A cloud platform
D. A sensor

Correct answer: B. A popular open-source real-time operating system

54. A task in an RTOS is:

A. A memory chip
B. A pin
C. An independent thread of execution ✔
D. A sensor reading

Correct answer: C. An independent thread of execution

55. A mutex in an RTOS:

A. Sends messages only
B. Stores data
C. Protects shared resources from concurrent access ✔
D. Speeds up the CPU

Correct answer: C. Protects shared resources from concurrent access

56. Hard real-time systems require:

A. Deadlines that must never be missed ✔
B. Only fast CPUs
C. No timing
D. Best-effort timing

Correct answer: A. Deadlines that must never be missed

57. Low-power design techniques include:

A. Adding more LEDs
B. Running at maximum speed always
C. Sleep modes and reducing clock frequency ✔
D. Disabling sleep

Correct answer: C. Sleep modes and reducing clock frequency

58. A sensor:

A. Converts a physical quantity into an electrical signal ✔
B. Displays text
C. Drives motors
D. Stores data

Correct answer: A. Converts a physical quantity into an electrical signal

59. An actuator:

A. Stores code
B. Measures temperature
C. Sends emails
D. Converts electrical signals into physical action ✔

Correct answer: D. Converts electrical signals into physical action

60. Examples of sensors include:

A. Displays
B. Speakers only
C. Motors and relays
D. Temperature, humidity, motion and light sensors ✔

Correct answer: D. Temperature, humidity, motion and light sensors

61. A relay is used to:

A. Store data
B. Generate Wi-Fi
C. Measure light
D. Switch high-power loads using a low-power signal ✔

Correct answer: D. Switch high-power loads using a low-power signal

62. A motor driver is needed because:

A. Pins are too strong
B. Microcontroller pins cannot supply enough current for motors ✔
C. Motors need no power
D. It stores code

Correct answer: B. Microcontroller pins cannot supply enough current for motors

63. Debouncing a button removes:

A. Wi-Fi interference
B. False multiple triggers caused by contact bounce ✔
C. Power
D. The button

Correct answer: B. False multiple triggers caused by contact bounce

64. The Internet of Things (IoT) refers to:

A. Only websites
B. Only smartphones
C. Only printers
D. Physical devices connected to the internet to collect and exchange data ✔

Correct answer: D. Physical devices connected to the internet to collect and exchange data

65. IoT architecture commonly includes:

A. Devices, connectivity, gateway, cloud and applications ✔
B. Only cloud
C. Only devices
D. Only apps

Correct answer: A. Devices, connectivity, gateway, cloud and applications

66. MQTT is:

A. A video format
B. A lightweight publish/subscribe messaging protocol for IoT ✔
C. A programming language
D. A database

Correct answer: B. A lightweight publish/subscribe messaging protocol for IoT

67. In MQTT, a broker:

A. Is a sensor
B. Receives and routes messages between publishers and subscribers ✔
C. Stores code
D. Is a microcontroller

Correct answer: B. Receives and routes messages between publishers and subscribers

68. CoAP is:

A. A lightweight web protocol for constrained devices ✔
B. A battery
C. A sensor
D. A video codec

Correct answer: A. A lightweight web protocol for constrained devices

69. LoRaWAN is designed for:

A. High-speed video
B. Wired Ethernet
C. Short-range only
D. Long-range, low-power wide-area networking ✔

Correct answer: D. Long-range, low-power wide-area networking

70. Zigbee is used for:

A. Wired backbones
B. Low-power mesh networks in home automation ✔
C. Long-distance satellite links
D. Video streaming

Correct answer: B. Low-power mesh networks in home automation

71. BLE stands for:

A. Binary Logic Engine
B. Broadband Long Extension
C. Bluetooth Low Energy ✔
D. Basic Link Ethernet

Correct answer: C. Bluetooth Low Energy

72. NB-IoT is:

A. A Wi-Fi standard
B. A cellular technology for low-power IoT devices ✔
C. A wired bus
D. A sensor type

Correct answer: B. A cellular technology for low-power IoT devices

73. An IoT gateway:

A. Is a sensor
B. Connects local devices to the cloud and may process data ✔
C. Is a display only
D. Is a battery

Correct answer: B. Connects local devices to the cloud and may process data

74. Edge computing in IoT means:

A. Sending all data to the cloud only
B. Storing on paper
C. Processing data near the devices instead of only in the cloud ✔
D. Not processing data

Correct answer: C. Processing data near the devices instead of only in the cloud

75. Cloud IoT platforms include:

A. AWS IoT Core and Azure IoT Hub ✔
B. WordPress
C. Photoshop
D. Excel

Correct answer: A. AWS IoT Core and Azure IoT Hub

Questions 76 to 100

76. OTA updates allow:

A. Physical replacement only
B. Updating device firmware remotely ✔
C. No updates
D. Only manual flashing

Correct answer: B. Updating device firmware remotely

77. IoT security risks include:

A. Secure boot
B. Strong encryption
C. Too many updates
D. Default passwords and unpatched firmware ✔

Correct answer: D. Default passwords and unpatched firmware

78. Secure boot ensures:

A. Unlimited access
B. Only trusted, signed firmware runs on a device ✔
C. No firmware
D. Faster booting only

Correct answer: B. Only trusted, signed firmware runs on a device

79. A device shadow or digital twin represents:

A. A backup battery
B. A sensor type
C. A wireless standard
D. The state of a physical device in the cloud ✔

Correct answer: D. The state of a physical device in the cloud

80. JSON is commonly used in IoT to:

A. Power devices
B. Format data payloads ✔
C. Encrypt firmware
D. Build circuits

Correct answer: B. Format data payloads

81. A PCB is:

A. A cloud service
B. A sensor
C. A programming language
D. A printed circuit board that connects electronic components ✔

Correct answer: D. A printed circuit board that connects electronic components

82. Schematic diagrams show:

A. Software code
B. Physical enclosure designs
C. Network topology only
D. Electrical connections between components ✔

Correct answer: D. Electrical connections between components

83. Ohm’s law states:

A. P = V / R always
B. V = I x R ✔
C. R = V x I
D. I = V x R

Correct answer: B. V = I x R

84. A voltage regulator:

A. Stores data
B. Provides a stable output voltage ✔
C. Senses temperature
D. Increases current always

Correct answer: B. Provides a stable output voltage

85. Logic level 3.3 V devices connected to 5 V signals may need:

A. Level shifting ✔
B. Nothing
C. A larger CPU
D. More current

Correct answer: A. Level shifting

86. A debugger such as JTAG or SWD allows:

A. Wi-Fi setup
B. Only charging batteries
C. Printing logs only
D. Programming and stepping through code on the target ✔

Correct answer: D. Programming and stepping through code on the target

87. An oscilloscope is used to:

A. Visualise electrical signals over time ✔
B. Measure resistance only
C. Store data
D. Program chips

Correct answer: A. Visualise electrical signals over time

88. A logic analyser is used to:

A. Charge batteries
B. Capture and decode digital signals ✔
C. Write firmware
D. Measure temperature

Correct answer: B. Capture and decode digital signals

89. Bare-metal programming means:

A. Using cloud only
B. Using Linux
C. Running code without an operating system ✔
D. Using Python always

Correct answer: C. Running code without an operating system

90. Embedded Linux is used when:

A. Only analogue circuits
B. Devices need rich OS features like networking and file systems ✔
C. Only tiny 8-bit tasks
D. No software

Correct answer: B. Devices need rich OS features like networking and file systems

91. Volatile keyword in embedded C tells the compiler:

A. The variable may change unexpectedly, e.g. in hardware registers ✔
B. The variable is constant
C. The variable is unused
D. The variable is global

Correct answer: A. The variable may change unexpectedly, e.g. in hardware registers

92. Bitwise operations are important in embedded systems for:

A. Web design
B. Drawing graphics
C. Database queries
D. Manipulating individual register bits ✔

Correct answer: D. Manipulating individual register bits

93. Memory-mapped I/O means:

A. Peripherals are accessed through specific memory addresses ✔
B. Using cloud storage
C. Using only files
D. Using Wi-Fi

Correct answer: A. Peripherals are accessed through specific memory addresses

94. Power consumption in battery devices is measured in:

A. Milliamps or microamps and milliamp-hours ✔
B. Pixels
C. Bytes only
D. Kilometres

Correct answer: A. Milliamps or microamps and milliamp-hours

95. Smart home devices like thermostats are examples of:

A. Spreadsheets
B. Mainframes
C. Databases
D. Consumer IoT ✔

Correct answer: D. Consumer IoT

96. Industrial IoT (IIoT) is used for:

A. Photo editing
B. Gaming
C. Monitoring and optimising industrial equipment ✔
D. Social media

Correct answer: C. Monitoring and optimising industrial equipment

97. Predictive maintenance uses IoT data to:

A. Ignore failures
B. Delete data
C. Increase downtime
D. Anticipate equipment failures before they happen ✔

Correct answer: D. Anticipate equipment failures before they happen

98. The main goal of embedded and IoT systems is to:

A. Only display websites
B. Replace all computers
C. Only store files
D. Provide reliable, efficient, connected control of real-world devices ✔

Correct answer: D. Provide reliable, efficient, connected control of real-world devices

99. A bootloader in a microcontroller:

A. Is a display
B. Is a sensor
C. Is a power supply
D. Allows loading new firmware into memory ✔

Correct answer: D. Allows loading new firmware into memory

100. Clock speed of a microcontroller is measured in:

A. Hertz (e.g. MHz) ✔
B. Ohms
C. Bytes
D. Volts

Correct answer: A. Hertz (e.g. MHz)

How to Pass the Embedded Systems Design Exam

  • Read every question carefully; most options look similar, so look for the most precise answer.
  • Revise the questions above topic by topic rather than memorising letters, because option order can change in the live test.
  • You need 80 correct answers out of 100 to pass, so aim to understand at least 85 to stay safe.
  • If you do not clear it on the first attempt, review the questions you missed and use the retake option.

Frequently Asked Questions

How many questions are in the Embedded Systems Design Professional Certification exam?

The exam has 100 multiple-choice questions, each worth 1 mark.

What is the passing score for the Embedded Systems Design Professional Certification?

You need at least 80% (80 out of 100) to pass and receive the certificate.

Can I retake the Embedded Systems Design Professional Certification exam?

Yes. If you score below 80%, you can retry the test after reviewing the topics.

Is the Itronix certificate verifiable?

Yes. Every certificate issued by Itronix Solutions has a unique ID that can be checked on the Itronix verify-certificate page.

More Electronics & Hardware Certification Answers

Disclaimer: These answers are provided for learning and revision. Questions and answers are checked regularly; if you find a mistake, let us know in the comments.

About Priya Dogra

Priya Dogra runs priyadogra.com, where she shares free certification courses, internships, jobs, scholarships and exam preparation guides for Indian students and freshers. Follow her on YouTube, LinkedIn and Instagram for the latest opportunities.

Check Also

Unix/ Linux Certification exam answers 2026

Unix/ Linux Certification Exam Answers 2026 (All 100 Questions)

All 100 Unix/ Linux Certification exam questions with correct answers highlighted - updated 2026.

Leave a Reply

Your email address will not be published. Required fields are marked *