Wednesday , November 18 2026
Breaking News

CNC Operator Certification Exam Answers 2026 (All 100 Questions)

CNC Operator Certification exam answers 2026: This page lists all 100 questions of the official CNC Operator Certification exam by Itronix Solutions, each with its four answer options and the correct answer highlighted in green. Use it to revise every topic before you attempt the test and earn your verifiable certificate.

About this certification: The CNC operator handles the computer numerical control machine. Maintaining, setting, and adjusting the machine are all part of the operator’s daily tasks.

Certification CNC Operator Certification
Provider Itronix Solutions
Category Engineering & CAD
Total questions 100 multiple-choice questions
Marks 1 mark per question (100 marks)
Passing score 80% (80 out of 100)
Retake Available if you do not pass
Certificate Verifiable online certificate

Take the exam: CNC Operator Certification on Itronix Solutions. See every other Itronix exam in our complete list of Itronix certification answers.

CNC Operator Exam Questions and Answers

Questions 1 to 25

1. What is the advantage of CNC machine?

A. Complicated jobs machining ✔
B. Less accuracy
C. Less investment
D. Less flexible

Correct answer: A. Complicated jobs machining

2. Which operation is performed by point- to-point system?

A. Drilling ✔
B. Pocket milling
C. Face milling
D. Side milling

Correct answer: A. Drilling

3. In machining of a workpiece, the material is removed by_____

A. melting action
B. shearing acting ✔
C. using brittleness of the material
D. drilling action

Correct answer: B. shearing acting

4. The depth that the tool is plunged into the surface is called as ______

A. feed
B. depth of cut ✔
C. working depth
D. depth of tool

Correct answer: B. depth of cut

5. What does CNC machine use to control motion and speed?

A. GUI
B. Numerical
C. Programs, as well as computer keyboard, Graphical user interface ✔
D. Feedback system

Correct answer: C. Programs, as well as computer keyboard, Graphical user interface

6. The function of the feedback system is to record the data from the sensor and compare it with output data.

A. True
B. False ✔

Correct answer: B. False

7. What is the function of the GUI(Graphical user interface)?

A. To record the data from the sensor
B. Converts program into the action of the driver
C. To control motion and speed
D. To understand the position of the tool according to the input program ✔

Correct answer: D. To understand the position of the tool according to the input program

8. The punch tape reader in a CNC machine is ____

A. program
B. driving system
C. feedback system
D. input device ✔

Correct answer: D. input device

9. A CNC machine find widest applications in the field of

A. small lot and batch production ✔
B. server production
C. Nonconventional machining
D. Mask production

Correct answer: A. small lot and batch production

10. A CNC machine tool has a continuous part control both linear and circular along X, Y, Z and control of table rotation about X axis and Z axis, so the machine should be called

A. 5C ✔
B. 3L, 2C
C. 2C, L
D. none of the above

Correct answer: A. 5C

11. Which code is used for ‘Circular interpolation clock wise direction’?

A. G01
B. G02 ✔
C. G03
D. G00

Correct answer: B. G02

12. What is the operation to produce internal thread in VMC?

A. Drilling
B. Tapping ✔
C. Boring
D. Reaming

Correct answer: B. Tapping

13. Feed is measured in units of _____

A. velocity
B. length
C. length/revolution ✔
D. degree/revolution

Correct answer: C. length/revolution

14. CNC machining centres do not include operations like ______

A. milling
B. boring
C. welding ✔
D. tapping

Correct answer: C. welding

15. What is the function of the GUI(Graphical user interface)?

A. To record the data from the sensor
B. Converts program into the action of the driver
C. To control motion and speed
D. To understand the position of the tool according to the input program ✔

Correct answer: D. To understand the position of the tool according to the input program

16. The punch tape reader in a CNC machine is ____

A. program
B. driving system
C. feedback system
D. input device ✔

Correct answer: D. input device

17. A machine will be said to have CNC control if

A. control is achieved by employment of alphanumeric data ✔
B. the loading and unloading of the work piece ON and OFF the machine respectively is made automatic
C. The tool motion is guided by drum cams and disc cams
D. The dimensions of the work piece are measured by sensors while cutting is going on

Correct answer: A. control is achieved by employment of alphanumeric data

18. CNC machining has the following main advantage over conventional machining practice

A. flexibility ✔
B. feedback control
C. ability to employ higher cutting speeds, feeds and depth of cut
D. none of the above

Correct answer: A. flexibility

19. Which motor is used for table movement on CNC milling?

A. Spindle motor
B. Servo motor ✔
C. Coolant motor
D. Hydraulic motor

Correct answer: B. Servo motor

20. What is part program?

A. Instruction to operator
B. Instruction to machine ✔
C. Instruction to supervisor
D. Instruction to manager

Correct answer: B. Instruction to machine

21. A CNC operator’s main responsibility is to:

A. Design websites
B. Sell machines
C. Set up, run and monitor CNC machines to produce accurate parts ✔
D. Manage payroll

Correct answer: C. Set up, run and monitor CNC machines to produce accurate parts

22. CNC machines read instructions written in:

A. HTML
B. SQL
C. Python only
D. G-code and M-code ✔

Correct answer: D. G-code and M-code

23. The machine zero (home) position is:

A. Any random point
B. The part’s centre always
C. A fixed reference point defined by the machine manufacturer ✔
D. The operator’s desk

Correct answer: C. A fixed reference point defined by the machine manufacturer

24. The work zero (part zero) is:

A. A tool number
B. A coolant setting
C. The reference point set by the operator on the workpiece ✔
D. The machine’s power switch

Correct answer: C. The reference point set by the operator on the workpiece

25. G54 to G59 commands select:

A. Coolant modes
B. Spindle speeds
C. Tool numbers
D. Work coordinate offsets ✔

Correct answer: D. Work coordinate offsets

Questions 26 to 50

26. G90 sets:

A. Absolute positioning mode ✔
B. Inch units
C. Incremental mode
D. Metric units

Correct answer: A. Absolute positioning mode

27. G91 sets:

A. Incremental positioning mode ✔
B. Absolute mode
C. Spindle stop
D. Tool change

Correct answer: A. Incremental positioning mode

28. G20 and G21 select:

A. Inch and millimetre units respectively ✔
B. Spindle directions
C. Work offsets
D. Coolant types

Correct answer: A. Inch and millimetre units respectively

29. G17 selects:

A. No plane
B. The YZ plane
C. The XZ plane
D. The XY plane for circular interpolation ✔

Correct answer: D. The XY plane for circular interpolation

30. G28 typically:

A. Ends the program
B. Returns the machine to its reference (home) position ✔
C. Starts the spindle
D. Changes tools

Correct answer: B. Returns the machine to its reference (home) position

31. G40, G41 and G42 relate to:

A. Cutter radius compensation off, left and right ✔
B. Coolant
C. Spindle speeds
D. Feed rates

Correct answer: A. Cutter radius compensation off, left and right

32. G43 activates:

A. Rapid moves
B. Coolant
C. Cutter radius compensation
D. Tool length compensation ✔

Correct answer: D. Tool length compensation

33. G81 is commonly:

A. A program end
B. A rapid move
C. A tapping cycle always
D. A simple drilling canned cycle ✔

Correct answer: D. A simple drilling canned cycle

34. G83 is commonly:

A. A threading cycle only
B. A facing cycle
C. A boring cycle
D. A peck drilling cycle ✔

Correct answer: D. A peck drilling cycle

35. G84 is commonly:

A. A dwell
B. A tapping cycle ✔
C. A rapid move
D. A drilling cycle

Correct answer: B. A tapping cycle

36. Canned cycles help to:

A. Change units
B. Shorten programs for repetitive operations like drilling ✔
C. Disable spindles
D. Make programs longer

Correct answer: B. Shorten programs for repetitive operations like drilling

37. M03 starts the spindle:

A. At zero speed
B. Clockwise ✔
C. Counter-clockwise
D. In reverse feed

Correct answer: B. Clockwise

38. M04 starts the spindle:

A. Not at all
B. Counter-clockwise ✔
C. At max speed always
D. Clockwise

Correct answer: B. Counter-clockwise

39. M05 is used to:

A. Start coolant
B. Change tools
C. End program
D. Stop the spindle ✔

Correct answer: D. Stop the spindle

40. M06 is used to:

A. Start spindle
B. Rewind program
C. Perform a tool change ✔
D. Stop coolant

Correct answer: C. Perform a tool change

41. M08 turns:

A. Coolant on ✔
B. Spindle off
C. Lights on
D. Coolant off

Correct answer: A. Coolant on

42. M09 turns:

A. Coolant off ✔
B. Coolant on
C. Machine on
D. Spindle on

Correct answer: A. Coolant off

43. M00 causes:

A. Tool change
B. A program stop until the operator restarts ✔
C. Spindle start
D. Coolant on

Correct answer: B. A program stop until the operator restarts

44. M01 is:

A. A program end
B. A mandatory stop
C. An optional stop active only when enabled ✔
D. A tool change

Correct answer: C. An optional stop active only when enabled

45. An F word in G-code specifies:

A. Spindle speed
B. Tool number
C. Offset number
D. Feed rate ✔

Correct answer: D. Feed rate

46. An S word in G-code specifies:

A. Spindle speed ✔
B. Coordinate
C. Feed rate
D. Tool number

Correct answer: A. Spindle speed

47. A T word in G-code specifies:

A. The plane
B. The tool number ✔
C. The spindle speed
D. The feed rate

Correct answer: B. The tool number

48. Spindle speed (RPM) for milling is calculated from:

A. Only part weight
B. Coolant volume
C. Cutting speed and tool diameter ✔
D. Program length

Correct answer: C. Cutting speed and tool diameter

49. Feed per tooth (chip load) affects:

A. Machine weight
B. Only colour
C. Surface finish, tool life and cutting forces ✔
D. Program name

Correct answer: C. Surface finish, tool life and cutting forces

50. Climb milling means:

A. No rotation
B. The cutter rotates against the feed
C. The cutter rotates in the same direction as the feed ✔
D. Drilling only

Correct answer: C. The cutter rotates in the same direction as the feed

Questions 51 to 75

51. Conventional milling means:

A. Only turning
B. No rotation
C. With the feed
D. The cutter rotates against the direction of feed ✔

Correct answer: D. The cutter rotates against the direction of feed

52. Depth of cut refers to:

A. The tool length
B. How deep the tool cuts into material in one pass ✔
C. The table size
D. The program length

Correct answer: B. How deep the tool cuts into material in one pass

53. End mills are used for:

A. Threading only
B. Milling slots, pockets and profiles ✔
C. Grinding
D. Drilling only

Correct answer: B. Milling slots, pockets and profiles

54. Face mills are used to:

A. Drill holes
B. Cut threads
C. Bore holes only
D. Machine flat surfaces on a workpiece ✔

Correct answer: D. Machine flat surfaces on a workpiece

55. Drills are used to:

A. Polish parts
B. Create holes ✔
C. Face surfaces
D. Cut slots

Correct answer: B. Create holes

56. Taps are used to:

A. Measure parts
B. Drill holes
C. Face surfaces
D. Cut internal threads ✔

Correct answer: D. Cut internal threads

57. Carbide tools compared with HSS tools:

A. Cannot cut metal
B. Are always cheaper
C. Are softer
D. Withstand higher cutting speeds and temperatures ✔

Correct answer: D. Withstand higher cutting speeds and temperatures

58. Tool wear can cause:

A. Better accuracy
B. Faster cycles always
C. Poor surface finish and dimensional errors ✔
D. No change

Correct answer: C. Poor surface finish and dimensional errors

59. A tool offset (length/diameter) compensates for:

A. Coolant type
B. Spindle speed
C. Part colour
D. Differences in actual tool dimensions ✔

Correct answer: D. Differences in actual tool dimensions

60. Touching off a tool means:

A. Turning the machine off
B. Painting it
C. Deleting the tool
D. Measuring its length or position relative to the work ✔

Correct answer: D. Measuring its length or position relative to the work

61. A tool setter or probe helps to:

A. Load programs
B. Clean chips
C. Measure tools and workpieces automatically ✔
D. Cool the spindle

Correct answer: C. Measure tools and workpieces automatically

62. Workholding devices include:

A. Only magnets
B. Only tape
C. Only glue
D. Vises, chucks, fixtures and clamps ✔

Correct answer: D. Vises, chucks, fixtures and clamps

63. A three-jaw chuck on a lathe:

A. Self-centres round workpieces ✔
B. Holds only square parts
C. Is a cutting tool
D. Measures parts

Correct answer: A. Self-centres round workpieces

64. A CNC lathe performs:

A. Turning operations on rotating workpieces ✔
B. 3D printing
C. Milling only
D. Welding

Correct answer: A. Turning operations on rotating workpieces

65. Facing on a lathe:

A. Drills holes only
B. Cuts threads
C. Machines the end of a workpiece flat ✔
D. Bores internally

Correct answer: C. Machines the end of a workpiece flat

66. Turning on a lathe:

A. Machines flat faces only
B. Cuts gears
C. Drills holes
D. Reduces the outside diameter of a rotating part ✔

Correct answer: D. Reduces the outside diameter of a rotating part

67. Boring enlarges:

A. Flat surfaces
B. Threads only
C. External diameters
D. An existing hole to precise size ✔

Correct answer: D. An existing hole to precise size

68. Threading on a lathe often uses:

A. G28
B. G01 only
C. M08
D. G76 or G92 threading cycles ✔

Correct answer: D. G76 or G92 threading cycles

69. A dry run means:

A. Deleting the program
B. Running a program without cutting to check motion ✔
C. Turning off the machine
D. Cutting without coolant only

Correct answer: B. Running a program without cutting to check motion

70. Single block mode lets the operator:

A. Skip lines
B. Execute the program one line at a time ✔
C. Run at full speed only
D. Delete code

Correct answer: B. Execute the program one line at a time

71. Feed override allows the operator to:

A. Adjust feed rate percentage during operation ✔
B. Change the program permanently
C. Stop coolant
D. Change tools

Correct answer: A. Adjust feed rate percentage during operation

72. Rapid override reduces:

A. Feed per tooth
B. Coolant flow
C. Spindle speed
D. The speed of rapid moves for safer setup ✔

Correct answer: D. The speed of rapid moves for safer setup

73. Graphics simulation on the control helps to:

A. Speed up cutting
B. Visualise tool paths before cutting ✔
C. Print drawings
D. Change materials

Correct answer: B. Visualise tool paths before cutting

74. CAM software generates:

A. Only invoices
B. Only drawings
C. Tool paths and G-code from CAD models ✔
D. Only emails

Correct answer: C. Tool paths and G-code from CAD models

75. Post-processors in CAM:

A. Store tools
B. Clean chips
C. Measure parts
D. Convert tool paths into machine-specific G-code ✔

Correct answer: D. Convert tool paths into machine-specific G-code

Questions 76 to 100

76. Vernier callipers measure:

A. Lengths and diameters with good precision ✔
B. Weight
C. Temperature
D. Hardness

Correct answer: A. Lengths and diameters with good precision

77. Micrometers measure:

A. Only colours
B. Only angles
C. Only weight
D. Very precise dimensions, often to 0.01 mm or better ✔

Correct answer: D. Very precise dimensions, often to 0.01 mm or better

78. Dial indicators are used to:

A. Cut metal
B. Measure weight
C. Check runout, flatness and alignment ✔
D. Program machines

Correct answer: C. Check runout, flatness and alignment

79. Height gauges are used to:

A. Cut threads
B. Measure temperature
C. Drill holes
D. Measure and mark vertical dimensions ✔

Correct answer: D. Measure and mark vertical dimensions

80. Go/No-Go gauges check:

A. Whether a feature is within tolerance ✔
B. Weight
C. Exact measurements to microns
D. Colour

Correct answer: A. Whether a feature is within tolerance

81. Tolerance on a drawing specifies:

A. The material colour
B. The allowable variation in a dimension ✔
C. The operator name
D. The machine model

Correct answer: B. The allowable variation in a dimension

82. Surface finish (Ra) indicates:

A. Hardness
B. The average roughness of a machined surface ✔
C. Colour
D. Part weight

Correct answer: B. The average roughness of a machined surface

83. First article inspection verifies:

A. Machine colour
B. Coolant level
C. The first part meets all drawing requirements before production ✔
D. Operator attendance

Correct answer: C. The first part meets all drawing requirements before production

84. Coolant in machining helps to:

A. Reduce heat, flush chips and improve tool life ✔
B. Increase friction
C. Slow cutting
D. Damage parts

Correct answer: A. Reduce heat, flush chips and improve tool life

85. Chip control is important because:

A. Chips are required
B. Chips are harmless always
C. Long chips can damage parts, tools and endanger operators ✔
D. Chips improve finish

Correct answer: C. Long chips can damage parts, tools and endanger operators

86. Personal protective equipment for CNC operators includes:

A. Safety glasses, safety shoes and hearing protection ✔
B. Gloves near rotating spindles always
C. Jewellery
D. Loose clothing

Correct answer: A. Safety glasses, safety shoes and hearing protection

87. Loose clothing near rotating machinery is dangerous because:

A. It is required
B. It improves grip
C. It keeps you cool
D. It can get caught and cause serious injury ✔

Correct answer: D. It can get caught and cause serious injury

88. Machine doors and guards should be:

A. Disabled
B. Left open always
C. Removed for speed
D. Closed during operation ✔

Correct answer: D. Closed during operation

89. Emergency stop buttons should be used:

A. Never
B. Only for tool changes
C. Only at shift end
D. Immediately when a dangerous situation arises ✔

Correct answer: D. Immediately when a dangerous situation arises

90. Preventive maintenance of CNC machines includes:

A. Removing guards
B. Checking lubrication, coolant and cleaning chips ✔
C. Skipping inspections
D. Ignoring alarms

Correct answer: B. Checking lubrication, coolant and cleaning chips

91. Machine alarms indicate:

A. Lunch breaks
B. Normal operation always
C. Program completion only
D. Errors or conditions requiring operator attention ✔

Correct answer: D. Errors or conditions requiring operator attention

92. Backlash in a machine axis can cause:

A. Nothing
B. Better accuracy
C. Faster cycles
D. Positioning errors when direction changes ✔

Correct answer: D. Positioning errors when direction changes

93. Reading engineering drawings is essential to:

A. Calculate salaries
B. Write emails
C. Understand dimensions, tolerances and features to machine ✔
D. Choose colours

Correct answer: C. Understand dimensions, tolerances and features to machine

94. Quality documentation for parts includes:

A. Only photos
B. Only invoices
C. Inspection records and measurement reports ✔
D. Nothing

Correct answer: C. Inspection records and measurement reports

95. The main goal of a CNC operator is to:

A. Produce accurate, high-quality parts safely and efficiently ✔
B. Ignore safety
C. Avoid measurements
D. Run machines as fast as possible regardless of quality

Correct answer: A. Produce accurate, high-quality parts safely and efficiently

96. G00 is used for:

A. Rapid positioning without cutting ✔
B. Linear cutting
C. Circular cutting
D. Dwell

Correct answer: A. Rapid positioning without cutting

97. G01 is used for:

A. Spindle start
B. Coolant
C. Linear interpolation at a programmed feed rate ✔
D. Rapid moves

Correct answer: C. Linear interpolation at a programmed feed rate

98. G02 performs:

A. Clockwise circular interpolation ✔
B. Counter-clockwise arcs
C. Drilling
D. Rapid moves

Correct answer: A. Clockwise circular interpolation

99. G03 performs:

A. Clockwise arcs
B. Counter-clockwise circular interpolation ✔
C. Tool change
D. Tapping

Correct answer: B. Counter-clockwise circular interpolation

100. M30 means:

A. Tool change
B. End of program and rewind to the start ✔
C. Coolant on
D. Spindle start

Correct answer: B. End of program and rewind to the start

How to Pass the CNC Operator Exam

  • Read every question carefully; most options look similar, so look for the most precise answer.
  • Revise the questions above topic by topic rather than memorising letters, because option order can change in the live test.
  • You need 80 correct answers out of 100 to pass, so aim to understand at least 85 to stay safe.
  • If you do not clear it on the first attempt, review the questions you missed and use the retake option.

Frequently Asked Questions

How many questions are in the CNC Operator Certification exam?

The exam has 100 multiple-choice questions, each worth 1 mark.

What is the passing score for the CNC Operator Certification?

You need at least 80% (80 out of 100) to pass and receive the certificate.

Can I retake the CNC Operator Certification exam?

Yes. If you score below 80%, you can retry the test after reviewing the topics.

Is the Itronix certificate verifiable?

Yes. Every certificate issued by Itronix Solutions has a unique ID that can be checked on the Itronix verify-certificate page.

More Engineering & CAD Certification Answers

Disclaimer: These answers are provided for learning and revision. Questions and answers are checked regularly; if you find a mistake, let us know in the comments.

About Priya Dogra

Priya Dogra runs priyadogra.com, where she shares free certification courses, internships, jobs, scholarships and exam preparation guides for Indian students and freshers. Follow her on YouTube, LinkedIn and Instagram for the latest opportunities.

Check Also

Unix/ Linux Certification exam answers 2026

Unix/ Linux Certification Exam Answers 2026 (All 100 Questions)

All 100 Unix/ Linux Certification exam questions with correct answers highlighted - updated 2026.

Leave a Reply

Your email address will not be published. Required fields are marked *