Solidworks Certification exam answers 2026: This page lists all 100 questions of the official Solidworks Certification exam by Itronix Solutions, each with its four answer options and the correct answer highlighted in green. Use it to revise every topic before you attempt the test and earn your verifiable certificate.
About this certification: SOLIDWORKS is an industry-leading CAD (Computer-Aided Design) and CAE (Computer-Aided Engineering) software used by millions of engineers across the world.
| Certification | Solidworks Certification |
| Provider | Itronix Solutions |
| Category | Engineering & CAD |
| Total questions | 100 multiple-choice questions |
| Marks | 1 mark per question (100 marks) |
| Passing score | 80% (80 out of 100) |
| Retake | Available if you do not pass |
| Certificate | Verifiable online certificate |
Take the exam: Solidworks Certification on Itronix Solutions. See every other Itronix exam in our complete list of Itronix certification answers.
Solidworks Exam Questions and Answers
Questions 1 to 25
1. What is the name of drawing when two or more parts join together?
Correct answer: A. Assembly
2. How it can be changed when once an entity has been defined in SolidWorks?
Correct answer: A. Editing
3. When creating an isometric drawing in Auto-CAD the drafter can utilize the Dynamic Input and Polar Coordinate system to place both vertical and horizontal lines. A line created from one point 3 inches at 180 degrees would be a ________ line.
Correct answer: B. Vertical
4. The type of line that projects from an object for the express purpose of locating a dimension is a ________ line.
Correct answer: C. Extension
5. By which feature a cylinder can be created by drawing a rectangular shape?
Correct answer: A. Revolve
6. What is the default grid spacing in both X & Y direction in AutoCAD?
Correct answer: B. 10
7. What is called when cutting the corner at an angle?
Correct answer: B. Chamfer
8. This is the measured size of a finished part:
Correct answer: A. Actual size
9. Drafters should use a ________ in a section view of a mechanical part that includes the cylindrical view of a threaded hole.
Correct answer: B. Center line
10. A ________ section allows the drafter to create a Cutting Plane line which is not in a straight line across the part.
Correct answer: A. Offset
11. Lines of an isometric drawing that are not parallel to the isometric axes are called this:
Correct answer: C. Non-isometric lines
12. Which command is not seen in surface option in model tool bar in an inventor?
Correct answer: D. Axis
13. Which command is use to arrange an object in rectangular matrix or polar grid?
Correct answer: B. Array
14. What is the function of insert block in AutoCAD?
Correct answer: A. To insert pre-saved shape in current drawing
15. This type of section is limited by a break line:
Correct answer: C. Broken-out section
16. Isometric drawings are often used by ________ to help illustrate complex designs.
Correct answer: D. All of the above
17. When creating a Cutting Plane line with Auto-CAD it is customary to use a ________ to create the line.
Correct answer: D. Polyline
18. How can the drafter prevent Auto-CAD from placing or stacking another center mark on a circle when adding a diameter dimension to it?
Correct answer: B. Use the Properties dialog box to turn off the center mark of the dimension
19. By which all the part drawing can be made visible in the graphic area?
Correct answer: B. Selection filter
20. What is the name of outside surface of part in SolidWorks?
Correct answer: D. Face
21. SolidWorks and CATIA are developed by:
Correct answer: B. Dassault Systemes
22. SolidWorks is mainly used for:
Correct answer: B. 3D parametric solid modelling and mechanical design
23. Parametric modelling means:
Correct answer: A. Geometry is driven by dimensions and relationships that can be edited
24. The three main document types in SolidWorks are:
Correct answer: A. Parts, assemblies and drawings
25. The SolidWorks part file extension is:
Correct answer: D. .SLDPRT
Questions 26 to 50
26. The SolidWorks assembly file extension is:
Correct answer: C. .SLDASM
27. The SolidWorks drawing file extension is:
Correct answer: B. .SLDDRW
28. CATIA part files typically use the extension:
Correct answer: B. .CATPart
29. A sketch is:
Correct answer: D. A 2D profile used to create 3D features
30. Sketches are created on:
Correct answer: B. Planes or flat faces
31. A fully defined sketch is shown in:
Correct answer: C. Black (in SolidWorks)
32. An under-defined sketch has:
Correct answer: C. Degrees of freedom remaining
33. An over-defined sketch has:
Correct answer: B. Conflicting or redundant dimensions or relations
34. Sketch relations include:
Correct answer: A. Horizontal, vertical, coincident, tangent and parallel
35. Smart Dimension is used to:
Correct answer: B. Add dimensions to sketch geometry
36. Extruded Boss/Base:
Correct answer: C. Adds material by extending a sketch
37. Extruded Cut:
Correct answer: B. Removes material using a sketch profile
38. Revolved Boss/Base:
Correct answer: D. Creates a feature by rotating a sketch around an axis
39. Swept Boss/Base:
Correct answer: A. Moves a profile along a path
40. Loft:
Correct answer: A. Creates a shape transitioning between multiple profiles
41. Fillet:
Correct answer: B. Rounds edges
42. Chamfer:
Correct answer: D. Bevels edges with an angled cut
43. Shell:
Correct answer: A. Hollows out a part leaving walls of specified thickness
44. Hole Wizard:
Correct answer: A. Creates standard holes like counterbore and tapped holes
45. Rib:
Correct answer: A. Adds a thin support feature from an open sketch
46. Draft:
Correct answer: A. Adds a taper to faces, often for moulding
47. Linear Pattern:
Correct answer: B. Repeats features along one or two directions
48. Circular Pattern:
Correct answer: A. Repeats features around an axis
49. Mirror feature:
Correct answer: A. Creates a symmetric copy across a plane
50. The FeatureManager design tree shows:
Correct answer: B. The history of features in a part
Questions 51 to 75
51. Rolling back the feature tree lets you:
Correct answer: B. View or insert features at an earlier stage
52. Reference geometry includes:
Correct answer: D. Planes, axes, points and coordinate systems
53. Applying a material to a part allows:
Correct answer: B. Mass properties and appearance calculations
54. Mass Properties tool calculates:
Correct answer: C. Mass, volume and centre of mass
55. Design intent refers to:
Correct answer: C. How a model should behave when changed
56. Configurations in SolidWorks allow:
Correct answer: A. Multiple variations of a part in one file
57. Design tables use:
Correct answer: C. Excel spreadsheets to drive configurations
58. Equations and global variables help to:
Correct answer: A. Link dimensions mathematically
59. In an assembly, mates define:
Correct answer: D. Relationships between components, such as coincident or concentric
60. A concentric mate:
Correct answer: D. Aligns cylindrical faces on a common axis
61. A coincident mate:
Correct answer: D. Places faces, edges or points in contact or on the same plane
62. The first component in an assembly is usually:
Correct answer: B. Fixed
63. Interference Detection checks:
Correct answer: B. Overlapping components in an assembly
64. Exploded views show:
Correct answer: D. Assembly components separated to illustrate assembly
65. Bottom-up assembly design means:
Correct answer: A. Creating parts first then assembling them
66. Top-down design means:
Correct answer: B. Designing parts in the context of the assembly
67. Toolbox in SolidWorks provides:
Correct answer: B. Standard fasteners and hardware
68. Drawings in SolidWorks are created from:
Correct answer: A. Parts and assemblies, with associative views
69. Standard views in drawings include:
Correct answer: D. Front, top, right and isometric
70. A section view shows:
Correct answer: B. The internal features by cutting through the model
71. A detail view shows:
Correct answer: C. An enlarged portion of another view
72. A Bill of Materials (BOM) lists:
Correct answer: B. Components and quantities in an assembly
73. Title blocks contain:
Correct answer: B. Drawing information like part number, scale and author
74. GD&T stands for:
Correct answer: C. Geometric Dimensioning and Tolerancing
75. Tolerances specify:
Correct answer: A. Acceptable variation in dimensions
Questions 76 to 100
76. Sheet Metal tools create:
Correct answer: B. Parts with bends, flanges and flat patterns
77. A flat pattern shows:
Correct answer: D. The unfolded sheet metal part for manufacturing
78. Weldments tools are used for:
Correct answer: B. Structural frames using standard profiles
79. Surface modelling is used for:
Correct answer: D. Complex freeform shapes
80. SolidWorks Simulation performs:
Correct answer: B. Finite element analysis such as stress and deflection
81. FEA stands for:
Correct answer: D. Finite Element Analysis
82. Von Mises stress is used to:
Correct answer: D. Predict yielding of ductile materials
83. Factor of safety equals:
Correct answer: B. Material strength divided by applied stress
84. Motion Study allows:
Correct answer: B. Simulating movement of assemblies
85. PhotoView 360 or Visualize is used for:
Correct answer: A. Photorealistic rendering
86. STEP and IGES formats are used for:
Correct answer: D. Exchanging CAD models between different software
87. STL files are commonly used for:
Correct answer: A. 3D printing
88. eDrawings is used to:
Correct answer: B. View and share CAD files
89. PDM (Product Data Management) helps to:
Correct answer: C. Manage CAD files, versions and workflows
90. CATIA is widely used in:
Correct answer: B. Aerospace and automotive industries
91. CATIA workbenches include:
Correct answer: A. Part Design, Assembly Design and Generative Shape Design
92. CATIA Generative Shape Design is used for:
Correct answer: D. Advanced surface modelling
93. CATIA V5 and 3DEXPERIENCE are:
Correct answer: A. Versions/platforms of CATIA
94. Rebuild errors in parametric models often result from:
Correct answer: A. Missing references after changes
95. Good modelling practice includes:
Correct answer: D. Fully defining sketches and keeping features simple
96. The main benefit of 3D CAD is:
Correct answer: C. Designing, testing and documenting products digitally before manufacturing
97. Convert Entities in a sketch:
Correct answer: D. Projects existing edges onto the sketch plane
98. Thread or Cosmetic Thread represents:
Correct answer: D. Screw threads on cylindrical features
99. Appearance settings change:
Correct answer: D. The visual colour and texture of a model
100. Measure tool is used to:
Correct answer: A. Check distances, angles and sizes
How to Pass the Solidworks Exam
- Read every question carefully; most options look similar, so look for the most precise answer.
- Revise the questions above topic by topic rather than memorising letters, because option order can change in the live test.
- You need 80 correct answers out of 100 to pass, so aim to understand at least 85 to stay safe.
- If you do not clear it on the first attempt, review the questions you missed and use the retake option.
Frequently Asked Questions
How many questions are in the Solidworks Certification exam?
The exam has 100 multiple-choice questions, each worth 1 mark.
What is the passing score for the Solidworks Certification?
You need at least 80% (80 out of 100) to pass and receive the certificate.
Can I retake the Solidworks Certification exam?
Yes. If you score below 80%, you can retry the test after reviewing the topics.
Is the Itronix certificate verifiable?
Yes. Every certificate issued by Itronix Solutions has a unique ID that can be checked on the Itronix verify-certificate page.
More Engineering & CAD Certification Answers
- ANSYS Structural Analysis Certification Exam Answers
- AutoCAD Certification Exam Answers
- AutoCAD Civil 3D Certification Exam Answers
- Basics of Civil Engineering Certification Exam Answers
- CATIA – Computer Aided Design and Drafting Certification Exam Answers
- CNC Operator Certification Exam Answers
- MATLAB Certification Exam Answers
- PLC Programming Certiication Exam Answers
Disclaimer: These answers are provided for learning and revision. Questions and answers are checked regularly; if you find a mistake, let us know in the comments.
Priya Dogra – Free Certifications, Exam Answers & Career Guides Free certification exam answers, courses, scholarships and career guides for learners worldwide