Wednesday , November 18 2026
Breaking News

IoT Hardware Development Professional Certification Exam Answers 2026 (All 100 Questions)

IoT Hardware Development Professional Certification exam answers 2026: This page lists all 100 questions of the official IoT Hardware Development Professional Certification exam by Itronix Solutions, each with its four answer options and the correct answer highlighted in green. Use it to revise every topic before you attempt the test and earn your verifiable certificate.

About this certification: This certification covers IoT hardware design, sensor integration, and communication protocols. Learn to develop smart devices and connect them to the internet for real-time data processing. Ideal for IoT engineers.

Certification IoT Hardware Development Professional Certification
Provider Itronix Solutions
Category Electronics & Hardware
Total questions 100 multiple-choice questions
Marks 1 mark per question (100 marks)
Passing score 80% (80 out of 100)
Retake Available if you do not pass
Certificate Verifiable online certificate

Take the exam: IoT Hardware Development Professional Certification on Itronix Solutions. See every other Itronix exam in our complete list of Itronix certification answers.

IoT Hardware Development Exam Questions and Answers

Questions 1 to 25

1. What does IoT stand for?

A. A) Internet of Tools
B. B) Integrated Operating Technology
C. C) Internet of Things ✔
D. D) Intelligent Operational Technology

Correct answer: C. C) Internet of Things

2. Which communication protocol is most commonly used in IoT for short-range wireless communication?

A. A) Bluetooth ✔
B. B) HTTP
C. C) SMTP
D. D) FTP

Correct answer: A. A) Bluetooth

3. What type of sensor is used to measure temperature in an IoT device?

A. A) Pressure sensor
B. B) Thermistor ✔
C. C) Proximity sensor
D. D) Accelerometer

Correct answer: B. B) Thermistor

4. Which microcontroller is widely used in IoT projects due to its low cost and ease of use?

A. A) PIC
B. B) Arduino ✔
C. C) Intel Core
D. D) Ryzen

Correct answer: B. B) Arduino

5. What is the role of an actuator in an IoT system?

A. A) To convert electrical signals into physical action ✔
B. B) To measure environmental conditions
C. C) To transmit data
D. D) To store data

Correct answer: A. A) To convert electrical signals into physical action

6. Which wireless communication technology is specifically designed for low-power IoT devices over long distances?

A. A) Wi-Fi
B. B) LoRa (Long Range) ✔
C. C) Bluetooth
D. D) NFC

Correct answer: B. B) LoRa (Long Range)

7. What is the primary function of an ADC (Analog-to-Digital Converter) in IoT hardware?

A. A) To convert analog signals to digital signals ✔
B. B) To amplify signals
C. C) To process digital signals
D. D) To convert digital signals to analog signals

Correct answer: A. A) To convert analog signals to digital signals

8. What type of sensor is used to detect human motion in smart home systems?

A. A) PIR (Passive Infrared) Sensor ✔
B. B) Temperature Sensor
C. C) Pressure Sensor
D. D) Humidity Sensor

Correct answer: A. A) PIR (Passive Infrared) Sensor

9. What does GPIO stand for in IoT hardware?

A. A) General Processor Input and Output
B. B) Global Pin Input and Output
C. C) General Purpose Input/Output ✔
D. D) Graphical Processing Input and Output

Correct answer: C. C) General Purpose Input/Output

10. Which communication protocol is used for secure communication over the internet in IoT devices?

A. A) FTP
B. B) SMTP
C. C) HTTPS ✔
D. D) Telnet

Correct answer: C. C) HTTPS

11. Which type of memory is used to store firmware in IoT devices?

A. A) RAM
B. B) Flash Memory ✔
C. C) Hard Disk
D. D) Cache

Correct answer: B. B) Flash Memory

12. Which IoT communication protocol is lightweight and suitable for devices with limited resources?

A. A) HTTP
B. B) FTP
C. C) MQTT (Message Queuing Telemetry Transport) ✔
D. D) SMTP

Correct answer: C. C) MQTT (Message Queuing Telemetry Transport)

13. What is the function of a power management unit (PMU) in an IoT device?

A. A) To transmit data
B. B) To regulate and manage power consumption ✔
C. C) To store data
D. D) To amplify signals

Correct answer: B. B) To regulate and manage power consumption

14. What is the role of an ESP8266 in IoT hardware?

A. A) Memory module
B. B) Wi-Fi module ✔
C. C) Microcontroller
D. D) Power supply

Correct answer: B. B) Wi-Fi module

15. What does NFC stand for in IoT communication?

A. A) Near Field Communication ✔
B. B) Network Frequency Communication
C. C) New Field Configuration
D. D) Near Frequency Connection

Correct answer: A. A) Near Field Communication

16. What is the primary role of a microcontroller in an IoT device?

A. A) To process input signals and control output ✔
B. B) To transmit data
C. C) To convert signals
D. D) To store data

Correct answer: A. A) To process input signals and control output

17. What type of battery is commonly used in wearable IoT devices due to its lightweight and rechargeability?

A. A) Alkaline Battery
B. B) Nickel-Cadmium Battery
C. C) Lithium-ion Battery ✔
D. D) Lead-Acid Battery

Correct answer: C. C) Lithium-ion Battery

18. What is the purpose of a watchdog timer in an IoT system?

A. A) To measure signal strength
B. B) To reset the system in case of a malfunction ✔
C. C) To amplify signals
D. D) To regulate power

Correct answer: B. B) To reset the system in case of a malfunction

19. What is the primary advantage of using a Zigbee network in IoT?

A. A) High data rate
B. B) Low power consumption ✔
C. C) Large bandwidth
D. D) High speed

Correct answer: B. B) Low power consumption

20. What is the function of a humidity sensor in an IoT weather station?

A. A) To measure moisture levels in the air ✔
B. B) To measure pressure
C. C) To measure temperature
D. D) To measure wind speed

Correct answer: A. A) To measure moisture levels in the air

21. IoT hardware development involves:

A. Only writing cloud code
B. Designing devices that sense, process and communicate data ✔
C. Only marketing
D. Only accounting

Correct answer: B. Designing devices that sense, process and communicate data

22. The typical building blocks of an IoT device are:

A. Only software
B. Only a screen
C. Only a battery
D. Microcontroller, sensors, connectivity module, power supply and enclosure ✔

Correct answer: D. Microcontroller, sensors, connectivity module, power supply and enclosure

23. Selecting a microcontroller for IoT depends on:

A. Only price
B. Processing needs, power consumption, peripherals and connectivity ✔
C. Only colour
D. Only brand

Correct answer: B. Processing needs, power consumption, peripherals and connectivity

24. System-on-Chip (SoC) modules like ESP32 combine:

A. Only memory
B. MCU and radio connectivity on one chip ✔
C. Only power
D. Only sensors

Correct answer: B. MCU and radio connectivity on one chip

25. Pre-certified radio modules help to:

A. Reduce regulatory certification effort and time ✔
B. Avoid antennas
C. Increase cost always
D. Remove firmware

Correct answer: A. Reduce regulatory certification effort and time

Questions 26 to 50

26. A requirements specification for IoT hardware should define:

A. Nothing
B. Functions, power budget, environment, size and cost ✔
C. Only colours
D. Only logos

Correct answer: B. Functions, power budget, environment, size and cost

27. Temperature sensors commonly used include:

A. Thermistors, RTDs, thermocouples and digital ICs like DS18B20 ✔
B. Only microphones
C. Only GPS
D. Only cameras

Correct answer: A. Thermistors, RTDs, thermocouples and digital ICs like DS18B20

28. Humidity sensors such as DHT22 or SHT31 measure:

A. Relative humidity and often temperature ✔
B. Light
C. Sound
D. Pressure only

Correct answer: A. Relative humidity and often temperature

29. Barometric pressure sensors such as BMP280 measure:

A. Humidity only
B. Motion
C. Colour
D. Atmospheric pressure and can estimate altitude ✔

Correct answer: D. Atmospheric pressure and can estimate altitude

30. PIR sensors detect:

A. Gas
B. Colour
C. Pressure
D. Motion via changes in infrared radiation ✔

Correct answer: D. Motion via changes in infrared radiation

31. Hall effect sensors detect:

A. Magnetic fields ✔
B. Humidity
C. Light
D. Sound

Correct answer: A. Magnetic fields

32. Gas sensors such as MQ series detect:

A. Distance
B. Temperature only
C. Concentrations of gases like smoke or CO ✔
D. Colour

Correct answer: C. Concentrations of gases like smoke or CO

33. Current sensors such as ACS712 measure:

A. Temperature
B. Voltage only
C. Electrical current ✔
D. Light

Correct answer: C. Electrical current

34. Load cells measure:

A. Light
B. Weight or force ✔
C. Sound
D. Humidity

Correct answer: B. Weight or force

35. Signal conditioning includes:

A. Encrypting data
B. Storing files
C. Amplifying, filtering and scaling sensor signals ✔
D. Displaying graphs

Correct answer: C. Amplifying, filtering and scaling sensor signals

36. An op-amp can be used to:

A. Transmit Wi-Fi
B. Supply power
C. Store data
D. Amplify weak sensor signals ✔

Correct answer: D. Amplify weak sensor signals

37. Low-pass filters remove:

A. DC power
B. High-frequency noise ✔
C. Low-frequency signals only
D. All signals

Correct answer: B. High-frequency noise

38. The ADC reference voltage affects:

A. Antenna size
B. Battery colour
C. Wi-Fi range
D. Measurement range and resolution ✔

Correct answer: D. Measurement range and resolution

39. Digital sensors often communicate via:

A. I2C or SPI ✔
B. Audio jacks
C. VGA
D. HDMI

Correct answer: A. I2C or SPI

40. Level shifters are needed when:

A. Powering motors only
B. Using the same voltage
C. Connecting devices with different logic voltages like 3.3 V and 5 V ✔
D. Using Wi-Fi

Correct answer: C. Connecting devices with different logic voltages like 3.3 V and 5 V

41. Relays and MOSFETs are used to:

A. Transmit radio
B. Store data
C. Measure temperature
D. Switch higher-power loads from a microcontroller ✔

Correct answer: D. Switch higher-power loads from a microcontroller

42. Flyback diodes across relay coils protect against:

A. Voltage spikes when the coil turns off ✔
B. Low battery
C. Wi-Fi interference
D. Overheating only

Correct answer: A. Voltage spikes when the coil turns off

43. Power budget analysis estimates:

A. Cloud costs only
B. Average current consumption and battery life ✔
C. Antenna gain only
D. Device colour

Correct answer: B. Average current consumption and battery life

44. Battery life (hours) is approximately:

A. Capacity times current
B. Current divided by capacity
C. Battery capacity (mAh) divided by average current (mA) ✔
D. Voltage times current

Correct answer: C. Battery capacity (mAh) divided by average current (mA)

45. LiPo batteries require:

A. Proper charging circuits and protection ✔
B. Water cooling
C. No protection
D. Mains power only

Correct answer: A. Proper charging circuits and protection

46. A battery management system (BMS) protects against:

A. Wi-Fi drops
B. Sensor noise
C. Overcharge, over-discharge and overcurrent ✔
D. Firmware bugs

Correct answer: C. Overcharge, over-discharge and overcurrent

47. Linear regulators (LDOs) are:

A. Used only for AC
B. Simple but waste excess voltage as heat ✔
C. Antennas
D. Always more efficient than switching regulators

Correct answer: B. Simple but waste excess voltage as heat

48. Switching regulators (buck/boost converters) offer:

A. Only AC output
B. Only noise
C. Higher efficiency for voltage conversion ✔
D. No efficiency gain

Correct answer: C. Higher efficiency for voltage conversion

49. Quiescent current is:

A. The current a regulator or device consumes when idle ✔
B. Antenna current
C. Peak current
D. Charging current

Correct answer: A. The current a regulator or device consumes when idle

50. Deep sleep modes can reduce current to:

A. Microamps, extending battery life ✔
B. Kiloamps
C. No change
D. Amps

Correct answer: A. Microamps, extending battery life

Questions 51 to 75

51. Energy harvesting sources include:

A. Solar, thermal, vibration and RF energy ✔
B. Only diesel
C. Only nuclear
D. Only mains

Correct answer: A. Solar, thermal, vibration and RF energy

52. Supercapacitors are useful for:

A. Long-term storage for years
B. Computation
C. Storing energy for short bursts of high current ✔
D. Sensing

Correct answer: C. Storing energy for short bursts of high current

53. Wi-Fi in IoT devices offers:

A. Lowest power always
B. High bandwidth but higher power consumption ✔
C. No internet
D. Kilometre range

Correct answer: B. High bandwidth but higher power consumption

54. BLE (Bluetooth Low Energy) is suited for:

A. Wired networks
B. Short-range, low-power communication with phones ✔
C. High-speed video
D. Long-range rural links

Correct answer: B. Short-range, low-power communication with phones

55. LoRa radios are suited for:

A. HD video
B. Short-range audio
C. Long-range, low-data-rate, low-power communication ✔
D. Wired Ethernet

Correct answer: C. Long-range, low-data-rate, low-power communication

56. Cellular IoT options include:

A. LTE-M and NB-IoT ✔
B. Infrared
C. Zigbee
D. Bluetooth Classic

Correct answer: A. LTE-M and NB-IoT

57. Antenna placement matters because:

A. Antennas work anywhere
B. It never matters
C. Only colour matters
D. Metal and ground planes affect radiation and range ✔

Correct answer: D. Metal and ground planes affect radiation and range

58. Antenna types used in IoT include:

A. Only TV aerials
B. Only satellite dishes
C. PCB trace, chip and external whip antennas ✔
D. Only coils

Correct answer: C. PCB trace, chip and external whip antennas

59. Impedance matching for RF circuits is typically:

A. 50 ohms ✔
B. 5 ohms
C. 0 ohms
D. 500 ohms

Correct answer: A. 50 ohms

60. A Smith chart is used for:

A. RF impedance matching design ✔
B. Database design
C. Graphic design
D. Financial planning

Correct answer: A. RF impedance matching design

61. RSSI indicates:

A. Received signal strength ✔
B. Battery voltage
C. Temperature
D. Data size

Correct answer: A. Received signal strength

62. PCB design for IoT devices is done in tools such as:

A. Word
B. Photoshop
C. Excel
D. KiCad, Altium Designer and Eagle ✔

Correct answer: D. KiCad, Altium Designer and Eagle

63. A schematic shows:

A. Cloud architecture
B. Marketing plan
C. Physical enclosure
D. Electrical connections between components ✔

Correct answer: D. Electrical connections between components

64. PCB layout determines:

A. Pricing
B. Firmware logic
C. Physical placement of components and copper routing ✔
D. Cloud setup

Correct answer: C. Physical placement of components and copper routing

65. Ground planes on PCBs help to:

A. Reduce noise and provide a stable return path ✔
B. Block signals
C. Increase noise
D. Store data

Correct answer: A. Reduce noise and provide a stable return path

66. Decoupling capacitors placed near ICs:

A. Store firmware
B. Replace regulators
C. Increase noise
D. Stabilise supply voltage by filtering noise ✔

Correct answer: D. Stabilise supply voltage by filtering noise

67. Trace width on a PCB must consider:

A. Only colour
B. Only text
C. Only logo
D. Current carrying capacity and impedance ✔

Correct answer: D. Current carrying capacity and impedance

68. Design Rule Check (DRC) ensures:

A. Cloud works
B. Firmware compiles
C. The layout meets manufacturing constraints ✔
D. Prices are correct

Correct answer: C. The layout meets manufacturing constraints

69. Gerber files are sent to:

A. Customers
B. Cloud servers
C. App stores
D. PCB manufacturers for fabrication ✔

Correct answer: D. PCB manufacturers for fabrication

70. A Bill of Materials (BOM) lists:

A. All components and quantities needed ✔
B. Marketing channels
C. User accounts
D. Firmware functions

Correct answer: A. All components and quantities needed

71. Design for Manufacturing (DFM) aims to:

A. Make products easy and cost-effective to produce ✔
B. Ignore assembly
C. Increase complexity
D. Use rare parts

Correct answer: A. Make products easy and cost-effective to produce

72. Surface-mount devices (SMD) are:

A. Components mounted directly on the PCB surface ✔
B. Wireless modules only
C. Through-hole only
D. Cables

Correct answer: A. Components mounted directly on the PCB surface

73. Prototyping often begins with:

A. Mass production
B. Development boards and breadboards ✔
C. Final certification
D. Injection moulding

Correct answer: B. Development boards and breadboards

74. Enclosure design must consider:

A. Only colour
B. Only price
C. Size, materials, heat dissipation and environmental protection ✔
D. Only logo

Correct answer: C. Size, materials, heat dissipation and environmental protection

75. IP ratings such as IP67 indicate:

A. Battery capacity
B. Internet protocol version
C. Processing power
D. Protection against dust and water ingress ✔

Correct answer: D. Protection against dust and water ingress

Questions 76 to 100

76. Thermal management prevents:

A. Nothing
B. Wi-Fi drops only
C. Data loss only
D. Overheating that can damage components ✔

Correct answer: D. Overheating that can damage components

77. EMC testing checks:

A. Battery life only
B. Software bugs
C. Electromagnetic emissions and immunity ✔
D. Colour accuracy

Correct answer: C. Electromagnetic emissions and immunity

78. FCC certification is required for:

A. Radio devices sold in the United States ✔
B. Only clothing
C. Only food
D. Only software

Correct answer: A. Radio devices sold in the United States

79. CE marking indicates:

A. Asian standards only
B. American approval
C. Conformity with European health, safety and environmental standards ✔
D. No standards

Correct answer: C. Conformity with European health, safety and environmental standards

80. ESD protection components such as TVS diodes protect against:

A. Weak signals
B. Low battery
C. Heat only
D. Electrostatic discharge damage ✔

Correct answer: D. Electrostatic discharge damage

81. Firmware for IoT hardware is often written in:

A. HTML
B. CSS
C. SQL
D. C or C++ ✔

Correct answer: D. C or C++

82. RTOS such as FreeRTOS or Zephyr help to:

A. Certify products
B. Design PCBs
C. Manage multiple tasks with deterministic timing ✔
D. Draw schematics

Correct answer: C. Manage multiple tasks with deterministic timing

83. Bootloaders on IoT devices enable:

A. Antenna tuning
B. Firmware updates, including over-the-air ✔
C. Battery charging
D. Sensor calibration only

Correct answer: B. Firmware updates, including over-the-air

84. Secure elements or TPMs store:

A. Sensor data only
B. Images
C. Firmware updates
D. Cryptographic keys securely in hardware ✔

Correct answer: D. Cryptographic keys securely in hardware

85. Hardware-based security helps protect against:

A. Key extraction and device cloning ✔
B. Bad weather
C. Low battery
D. Weak Wi-Fi

Correct answer: A. Key extraction and device cloning

86. Debug interfaces like JTAG/SWD should be:

A. Left fully open always
B. Disabled or protected in production devices ✔
C. Removed before testing
D. Used by customers

Correct answer: B. Disabled or protected in production devices

87. Testing IoT hardware includes:

A. Only visual inspection
B. Functional, environmental, power and RF testing ✔
C. Only cloud tests
D. Nothing

Correct answer: B. Functional, environmental, power and RF testing

88. Burn-in testing helps to:

A. Reduce cost only
B. Speed up firmware
C. Increase battery life
D. Detect early-life component failures ✔

Correct answer: D. Detect early-life component failures

89. Field trials help to:

A. Avoid feedback
B. Increase defects
C. Skip lab tests
D. Validate device performance in real environments ✔

Correct answer: D. Validate device performance in real environments

90. Supply chain risks for hardware include:

A. Unlimited availability
B. Instant delivery always
C. Component shortages and long lead times ✔
D. No risks

Correct answer: C. Component shortages and long lead times

91. Choosing components with multiple sources reduces:

A. Supply chain risk ✔
B. Antenna gain
C. Battery life
D. Product quality

Correct answer: A. Supply chain risk

92. Cost optimisation in IoT hardware balances:

A. Only speed
B. Only colour
C. Only logo
D. Component cost, performance and reliability ✔

Correct answer: D. Component cost, performance and reliability

93. Version control of hardware designs helps to:

A. Track changes to schematics, layouts and BOMs ✔
B. Avoid collaboration
C. Hide changes
D. Delete designs

Correct answer: A. Track changes to schematics, layouts and BOMs

94. The main goal of IoT hardware development is to:

A. Make devices as complex as possible
B. Ignore power consumption
C. Build reliable, efficient and certifiable connected devices ✔
D. Avoid testing

Correct answer: C. Build reliable, efficient and certifiable connected devices

95. Accelerometers in IoT devices are used for:

A. Sensing gas
B. Measuring humidity
C. Detecting motion, orientation and vibration ✔
D. Measuring light

Correct answer: C. Detecting motion, orientation and vibration

96. Ultra-wideband (UWB) is used in IoT for:

A. Long-range farming sensors only
B. Video streaming
C. Precise indoor positioning ✔
D. Power supply

Correct answer: C. Precise indoor positioning

97. GNSS modules provide:

A. Location data from satellite systems such as GPS ✔
B. Temperature
C. Humidity
D. Wi-Fi

Correct answer: A. Location data from satellite systems such as GPS

98. Pull-down resistors keep an input:

A. Disconnected
B. At logic low when not driven ✔
C. At logic high
D. Floating

Correct answer: B. At logic low when not driven

99. Reverse polarity protection prevents damage when:

A. Sensors fail
B. Firmware crashes
C. Wi-Fi drops
D. Power is connected the wrong way round ✔

Correct answer: D. Power is connected the wrong way round

100. Conformal coating on PCBs protects against:

A. Moisture, dust and corrosion ✔
B. Weak signals
C. Software bugs
D. Low battery

Correct answer: A. Moisture, dust and corrosion

How to Pass the IoT Hardware Development Exam

  • Read every question carefully; most options look similar, so look for the most precise answer.
  • Revise the questions above topic by topic rather than memorising letters, because option order can change in the live test.
  • You need 80 correct answers out of 100 to pass, so aim to understand at least 85 to stay safe.
  • If you do not clear it on the first attempt, review the questions you missed and use the retake option.

Frequently Asked Questions

How many questions are in the IoT Hardware Development Professional Certification exam?

The exam has 100 multiple-choice questions, each worth 1 mark.

What is the passing score for the IoT Hardware Development Professional Certification?

You need at least 80% (80 out of 100) to pass and receive the certificate.

Can I retake the IoT Hardware Development Professional Certification exam?

Yes. If you score below 80%, you can retry the test after reviewing the topics.

Is the Itronix certificate verifiable?

Yes. Every certificate issued by Itronix Solutions has a unique ID that can be checked on the Itronix verify-certificate page.

More Electronics & Hardware Certification Answers

Disclaimer: These answers are provided for learning and revision. Questions and answers are checked regularly; if you find a mistake, let us know in the comments.

About Priya Dogra

Priya Dogra runs priyadogra.com, where she shares free certification courses, internships, jobs, scholarships and exam preparation guides for Indian students and freshers. Follow her on YouTube, LinkedIn and Instagram for the latest opportunities.

Check Also

Unix/ Linux Certification exam answers 2026

Unix/ Linux Certification Exam Answers 2026 (All 100 Questions)

All 100 Unix/ Linux Certification exam questions with correct answers highlighted - updated 2026.

Leave a Reply

Your email address will not be published. Required fields are marked *