Embedded Systems Design Professional Certification exam answers 2026: This page lists all 100 questions of the official Embedded Systems Design Professional Certification exam by Itronix Solutions, each with its four answer options and the correct answer highlighted in green. Use it to revise every topic before you attempt the test and earn your verifiable certificate.
About this certification: This certification teaches microcontroller programming, real-time operating systems (RTOS), and hardware-software integration. You’ll learn to design embedded systems for automation and control applications.
| Certification | Embedded Systems Design Professional Certification |
| Provider | Itronix Solutions |
| Category | Electronics & Hardware |
| Total questions | 100 multiple-choice questions |
| Marks | 1 mark per question (100 marks) |
| Passing score | 80% (80 out of 100) |
| Retake | Available if you do not pass |
| Certificate | Verifiable online certificate |
Take the exam: Embedded Systems Design Professional Certification on Itronix Solutions. See every other Itronix exam in our complete list of Itronix certification answers.
Embedded Systems Design Exam Questions and Answers
Questions 1 to 25
1. 14. What is the function of a pulse-width modulation (PWM) signal in an embedded system?
Correct answer: B. B) Control the duty cycle of a signal
2. 15. Which of the following is a real-time constraint in embedded systems?
Correct answer: B. B) Fixed response time
3. 16. What is the purpose of DMA (Direct Memory Access) in an embedded system?
Correct answer: A. A) To transfer data directly between memory and peripherals without CPU involvement
4. 17. Which microcontroller component generates the system clock signal?
Correct answer: C. C) Crystal Oscillator
5. 18. What is the role of a bootloader in an embedded system?
Correct answer: B. B) Load the operating system or firmware
6. 19. What type of operating system is typically used in embedded systems?
Correct answer: B. B) Real-Time Operating System (RTOS)
7. 20. What is the purpose of a UART (Universal Asynchronous Receiver/Transmitter) in an embedded system?
Correct answer: A. A) To enable serial communication
8. 1. What is an embedded system?
Correct answer: B. B) A system designed to perform a specific task within a larger system
9. 2. Which programming language is most commonly used for embedded systems?
Correct answer: C. C) C
10. 3. What type of memory is typically used to store firmware in embedded systems?
Correct answer: B. B) ROM
11. 4. Which microcontroller feature allows it to handle multiple tasks simultaneously?
Correct answer: C. C) Interrupts
12. 5. What is the role of a watchdog timer in an embedded system?
Correct answer: D. D) To reset the system if it becomes unresponsive
13. 6. Which communication protocol is commonly used for short-distance communication in embedded systems?
Correct answer: D. D) I2C
14. 7. What does RTOS stand for?
Correct answer: C. C) Real-Time Operating System
15. 8. Which type of memory is non-volatile and can be erased and reprogrammed?
Correct answer: A. A) Flash Memory
16. 9. What is the primary purpose of an ADC (Analog-to-Digital Converter) in embedded systems?
Correct answer: D. D) Convert analog signals to digital signals
17. 10. Which bus is commonly used for high-speed data transfer in embedded systems?
Correct answer: B. B) SPI (Serial Peripheral Interface)
18. 11. What is the function of a GPIO pin in a microcontroller?
Correct answer: A. A) To allow input and output operations
19. 12. Which embedded system architecture separates data and instruction memory?
Correct answer: C. C) Von Neumann Architecture
20. 13. Which type of signal is typically processed by an embedded system’s ADC?
Correct answer: A. A) Analog
21. An embedded system is:
Correct answer: B. A computer system designed for a dedicated function within a larger device
22. Examples of embedded systems include:
Correct answer: B. Washing machine controllers, car ECUs and smart meters
23. A microcontroller integrates:
Correct answer: A. CPU, memory and peripherals on a single chip
24. A microprocessor typically:
Correct answer: A. Contains the CPU and needs external memory and peripherals
25. Popular microcontroller families include:
Correct answer: D. AVR, PIC, ARM Cortex-M and ESP32
Questions 26 to 50
26. Arduino Uno is based on the:
Correct answer: C. ATmega328P microcontroller
27. Raspberry Pi is best described as:
Correct answer: B. A single-board computer that runs Linux
28. ESP32 is popular for IoT because it has:
Correct answer: B. Built-in Wi-Fi and Bluetooth
29. Firmware is:
Correct answer: D. Software programmed into the device’s non-volatile memory
30. Embedded C is widely used because:
Correct answer: B. It offers low-level hardware control with efficiency
31. Flash memory in microcontrollers stores:
Correct answer: C. Program code that persists without power
32. SRAM in microcontrollers stores:
Correct answer: C. Runtime variables and the stack
33. EEPROM is used to:
Correct answer: B. Store small amounts of non-volatile data like settings
34. GPIO stands for:
Correct answer: A. General Purpose Input/Output
35. A GPIO pin configured as output can:
Correct answer: B. Drive an LED or relay
36. A pull-up resistor ensures:
Correct answer: C. An input pin reads a defined high level when not driven
37. An ADC converts:
Correct answer: B. Analogue signals into digital values
38. A DAC converts:
Correct answer: D. Digital values into analogue signals
39. ADC resolution of 10 bits gives:
Correct answer: A. 1024 levels
40. PWM stands for:
Correct answer: A. Pulse Width Modulation
41. PWM is commonly used to:
Correct answer: B. Control motor speed or LED brightness
42. Duty cycle in PWM is:
Correct answer: D. The percentage of time the signal is high
43. UART is:
Correct answer: A. A serial communication protocol using TX and RX lines
44. I2C uses:
Correct answer: A. Two wires: SDA and SCL
45. SPI typically uses:
Correct answer: A. MOSI, MISO, SCK and chip select lines
46. CAN bus is widely used in:
Correct answer: A. Automotive and industrial systems
47. An interrupt allows:
Correct answer: B. The processor to respond immediately to events
48. An ISR is:
Correct answer: A. An Interrupt Service Routine that handles an interrupt
49. Polling means:
Correct answer: A. Repeatedly checking a device’s status in a loop
50. A timer peripheral can be used to:
Correct answer: B. Generate delays, measure time and create PWM
Questions 51 to 75
51. A watchdog timer:
Correct answer: B. Resets the system if software stops responding
52. An RTOS provides:
Correct answer: D. Deterministic task scheduling for real-time applications
53. FreeRTOS is:
Correct answer: B. A popular open-source real-time operating system
54. A task in an RTOS is:
Correct answer: C. An independent thread of execution
55. A mutex in an RTOS:
Correct answer: C. Protects shared resources from concurrent access
56. Hard real-time systems require:
Correct answer: A. Deadlines that must never be missed
57. Low-power design techniques include:
Correct answer: C. Sleep modes and reducing clock frequency
58. A sensor:
Correct answer: A. Converts a physical quantity into an electrical signal
59. An actuator:
Correct answer: D. Converts electrical signals into physical action
60. Examples of sensors include:
Correct answer: D. Temperature, humidity, motion and light sensors
61. A relay is used to:
Correct answer: D. Switch high-power loads using a low-power signal
62. A motor driver is needed because:
Correct answer: B. Microcontroller pins cannot supply enough current for motors
63. Debouncing a button removes:
Correct answer: B. False multiple triggers caused by contact bounce
64. The Internet of Things (IoT) refers to:
Correct answer: D. Physical devices connected to the internet to collect and exchange data
65. IoT architecture commonly includes:
Correct answer: A. Devices, connectivity, gateway, cloud and applications
66. MQTT is:
Correct answer: B. A lightweight publish/subscribe messaging protocol for IoT
67. In MQTT, a broker:
Correct answer: B. Receives and routes messages between publishers and subscribers
68. CoAP is:
Correct answer: A. A lightweight web protocol for constrained devices
69. LoRaWAN is designed for:
Correct answer: D. Long-range, low-power wide-area networking
70. Zigbee is used for:
Correct answer: B. Low-power mesh networks in home automation
71. BLE stands for:
Correct answer: C. Bluetooth Low Energy
72. NB-IoT is:
Correct answer: B. A cellular technology for low-power IoT devices
73. An IoT gateway:
Correct answer: B. Connects local devices to the cloud and may process data
74. Edge computing in IoT means:
Correct answer: C. Processing data near the devices instead of only in the cloud
75. Cloud IoT platforms include:
Correct answer: A. AWS IoT Core and Azure IoT Hub
Questions 76 to 100
76. OTA updates allow:
Correct answer: B. Updating device firmware remotely
77. IoT security risks include:
Correct answer: D. Default passwords and unpatched firmware
78. Secure boot ensures:
Correct answer: B. Only trusted, signed firmware runs on a device
79. A device shadow or digital twin represents:
Correct answer: D. The state of a physical device in the cloud
80. JSON is commonly used in IoT to:
Correct answer: B. Format data payloads
81. A PCB is:
Correct answer: D. A printed circuit board that connects electronic components
82. Schematic diagrams show:
Correct answer: D. Electrical connections between components
83. Ohm’s law states:
Correct answer: B. V = I x R
84. A voltage regulator:
Correct answer: B. Provides a stable output voltage
85. Logic level 3.3 V devices connected to 5 V signals may need:
Correct answer: A. Level shifting
86. A debugger such as JTAG or SWD allows:
Correct answer: D. Programming and stepping through code on the target
87. An oscilloscope is used to:
Correct answer: A. Visualise electrical signals over time
88. A logic analyser is used to:
Correct answer: B. Capture and decode digital signals
89. Bare-metal programming means:
Correct answer: C. Running code without an operating system
90. Embedded Linux is used when:
Correct answer: B. Devices need rich OS features like networking and file systems
91. Volatile keyword in embedded C tells the compiler:
Correct answer: A. The variable may change unexpectedly, e.g. in hardware registers
92. Bitwise operations are important in embedded systems for:
Correct answer: D. Manipulating individual register bits
93. Memory-mapped I/O means:
Correct answer: A. Peripherals are accessed through specific memory addresses
94. Power consumption in battery devices is measured in:
Correct answer: A. Milliamps or microamps and milliamp-hours
95. Smart home devices like thermostats are examples of:
Correct answer: D. Consumer IoT
96. Industrial IoT (IIoT) is used for:
Correct answer: C. Monitoring and optimising industrial equipment
97. Predictive maintenance uses IoT data to:
Correct answer: D. Anticipate equipment failures before they happen
98. The main goal of embedded and IoT systems is to:
Correct answer: D. Provide reliable, efficient, connected control of real-world devices
99. A bootloader in a microcontroller:
Correct answer: D. Allows loading new firmware into memory
100. Clock speed of a microcontroller is measured in:
Correct answer: A. Hertz (e.g. MHz)
How to Pass the Embedded Systems Design Exam
- Read every question carefully; most options look similar, so look for the most precise answer.
- Revise the questions above topic by topic rather than memorising letters, because option order can change in the live test.
- You need 80 correct answers out of 100 to pass, so aim to understand at least 85 to stay safe.
- If you do not clear it on the first attempt, review the questions you missed and use the retake option.
Frequently Asked Questions
How many questions are in the Embedded Systems Design Professional Certification exam?
The exam has 100 multiple-choice questions, each worth 1 mark.
What is the passing score for the Embedded Systems Design Professional Certification?
You need at least 80% (80 out of 100) to pass and receive the certificate.
Can I retake the Embedded Systems Design Professional Certification exam?
Yes. If you score below 80%, you can retry the test after reviewing the topics.
Is the Itronix certificate verifiable?
Yes. Every certificate issued by Itronix Solutions has a unique ID that can be checked on the Itronix verify-certificate page.
More Electronics & Hardware Certification Answers
- Computer Architecture and Organization Professional Certification Exam Answers
- Computer Hardware and Networking Professional Certification Exam Answers
- Embedded Linux Development Professional Certification Exam Answers
- FPGA Design Professional Certification Exam Answers
- Hardware Security Professional Certification Exam Answers
- IOT – Internet of Things Certification Exam Answers
- IoT Hardware Development Professional Certification Exam Answers
- Microprocessor and Microcontroller Programming Professional Certification Exam Answers
Disclaimer: These answers are provided for learning and revision. Questions and answers are checked regularly; if you find a mistake, let us know in the comments.
Priya Dogra – Free Certifications, Exam Answers & Career Guides Free certification exam answers, courses, scholarships and career guides for learners worldwide