Wednesday , November 18 2026
Breaking News

Embedded Linux Development Professional Certification Exam Answers 2026 (All 100 Questions)

Embedded Linux Development Professional Certification exam answers 2026: This page lists all 100 questions of the official Embedded Linux Development Professional Certification exam by Itronix Solutions, each with its four answer options and the correct answer highlighted in green. Use it to revise every topic before you attempt the test and earn your verifiable certificate.

About this certification: This certification teaches Linux kernel customization, driver development, and embedded hardware interfaces. Ideal for embedded developers, it focuses on real-world Linux-based systems.

Certification Embedded Linux Development Professional Certification
Provider Itronix Solutions
Category Electronics & Hardware
Total questions 100 multiple-choice questions
Marks 1 mark per question (100 marks)
Passing score 80% (80 out of 100)
Retake Available if you do not pass
Certificate Verifiable online certificate

Take the exam: Embedded Linux Development Professional Certification on Itronix Solutions. See every other Itronix exam in our complete list of Itronix certification answers.

Embedded Linux Development Exam Questions and Answers

Questions 1 to 25

1. What is the primary role of the Linux kernel in an embedded system?

A. A) To store user data
B. B) To handle networking operations
C. C) To manage hardware and system resources ✔
D. D) To compile source code

Correct answer: C. C) To manage hardware and system resources

2. Which bootloader is most commonly used for embedded Linux systems?

A. A) GRUB
B. B) U-Boot ✔
C. C) LILO
D. D) RedBoot

Correct answer: B. B) U-Boot

3. What is the purpose of a device tree in embedded Linux?

A. A) To store user preferences
B. B) To configure the file system
C. C) To describe hardware components to the kernel ✔
D. D) To manage memory allocation

Correct answer: C. C) To describe hardware components to the kernel

4. Which file system is commonly used in embedded Linux for flash memory storage?

A. A) FAT32
B. B) NTFS
C. C) JFFS2 ✔
D. D) EXT3

Correct answer: C. C) JFFS2

5. What is the role of the root filesystem in an embedded Linux system?

A. A) To store system files and directories necessary for booting and operation ✔
B. B) To store user data
C. C) To manage kernel modules
D. D) To handle network traffic

Correct answer: A. A) To store system files and directories necessary for booting and operation

6. What command is used to load kernel modules in Linux?

A. A) modshow
B. B) insmod ✔
C. C) loadmod
D. D) kernload

Correct answer: B. B) insmod

7. Which process has a process ID (PID) of 1 in an embedded Linux system?

A. A) init ✔
B. B) systemd
C. C) cron
D. D) bash

Correct answer: A. A) init

8. What is the function of the strace command in embedded Linux?

A. A) To compile programs
B. B) To trace system calls made by a process ✔
C. C) To monitor network traffic
D. D) To list kernel modules

Correct answer: B. B) To trace system calls made by a process

9. What is the purpose of the /proc directory in embedded Linux?

A. A) To store binary executables
B. B) To manage user permissions
C. C) To provide information about running processes and system state ✔
D. D) To store logs

Correct answer: C. C) To provide information about running processes and system state

10. Which programming language is most commonly used for kernel development in embedded Linux?

A. A) Java
B. B) Python
C. C) C ✔
D. D) Assembly

Correct answer: C. C) C

11. What is the function of a watchdog timer in embedded Linux?

A. A) To increase CPU clock speed
B. B) To reset the system if it becomes unresponsive ✔
C. C) To monitor disk activity
D. D) To schedule processes

Correct answer: B. B) To reset the system if it becomes unresponsive

12. What is the primary role of a cross-compiler in embedded Linux development?

A. A) To compile code for a target platform from a different architecture ✔
B. B) To create kernel modules
C. C) To execute user-space programs
D. D) To debug system calls

Correct answer: A. A) To compile code for a target platform from a different architecture

13. What type of scheduler does the Linux kernel use by default?

A. A) Completely Fair Scheduler (CFS) ✔
B. B) First In, First Out (FIFO)
C. C) Round Robin
D. D) Shortest Job First

Correct answer: A. A) Completely Fair Scheduler (CFS)

14. What command is used to display kernel log messages in embedded Linux?

A. A) syslog
B. B) dmesg ✔
C. C) logcat
D. D) kernlog

Correct answer: B. B) dmesg

15. Which signal is used to terminate a process gracefully in Linux?

A. A) SIGSTOP
B. B) SIGTERM ✔
C. C) SIGKILL
D. D) SIGCONT

Correct answer: B. B) SIGTERM

16. What is the purpose of busybox in embedded Linux?

A. A) To provide a lightweight set of Unix utilities ✔
B. B) To create user accounts
C. C) To compile kernel modules
D. D) To store device configuration

Correct answer: A. A) To provide a lightweight set of Unix utilities

17. What command is used to create a new filesystem in Linux?

A. A) format
B. B) diskpart
C. C) mkfs ✔
D. D) mount

Correct answer: C. C) mkfs

18. What type of kernel is used by Linux?

A. A) Monolithic
B. B) Microkernel
C. C) Hybrid
D. D) Monolithic with modular support ✔

Correct answer: D. D) Monolithic with modular support

19. Which command is used to check running processes in Linux?

A. A) ps -k
B. B) ps -aux ✔
C. C) showproc
D. D) procdump

Correct answer: B. B) ps -aux

20. What is the primary purpose of ldd in Linux?

A. A) To link object files
B. B) To list processes
C. C) To display shared library dependencies ✔
D. D) To load kernel modules

Correct answer: C. C) To display shared library dependencies

21. Embedded Linux is:

A. A microcontroller without an OS
B. A Windows edition
C. The Linux kernel and userspace adapted to run on embedded devices ✔
D. A desktop game

Correct answer: C. The Linux kernel and userspace adapted to run on embedded devices

22. Embedded Linux is commonly used in:

A. Only desktop PCs
B. Only calculators
C. Only mainframes
D. Routers, smart TVs, industrial gateways and automotive systems ✔

Correct answer: D. Routers, smart TVs, industrial gateways and automotive systems

23. Embedded Linux typically requires:

A. A processor with an MMU and more memory than tiny microcontrollers ✔
B. No memory
C. 8-bit MCUs with 2 KB RAM
D. No CPU

Correct answer: A. A processor with an MMU and more memory than tiny microcontrollers

24. Common processors running embedded Linux include:

A. AVR ATtiny
B. ARM Cortex-A series ✔
C. 8051
D. PIC10

Correct answer: B. ARM Cortex-A series

25. A typical embedded Linux system consists of:

A. Only drivers
B. Bootloader, kernel, device tree and root filesystem ✔
C. Only firmware
D. Only an app

Correct answer: B. Bootloader, kernel, device tree and root filesystem

Questions 26 to 50

26. The bootloader’s job is to:

A. Run user apps
B. Display UI
C. Initialise hardware and load the kernel ✔
D. Store data

Correct answer: C. Initialise hardware and load the kernel

27. U-Boot is:

A. A compiler
B. A popular open-source bootloader for embedded systems ✔
C. A kernel
D. A filesystem

Correct answer: B. A popular open-source bootloader for embedded systems

28. The device tree describes:

A. Network routes
B. User passwords
C. Application code
D. Hardware components to the kernel without hard-coding them ✔

Correct answer: D. Hardware components to the kernel without hard-coding them

29. Device tree source files have the extension:

A. .dtb only
B. .dts ✔
C. .py
D. .c

Correct answer: B. .dts

30. The compiled device tree blob has the extension:

A. .elf
B. .ko
C. .dts
D. .dtb ✔

Correct answer: D. .dtb

31. The root filesystem contains:

A. Only drivers
B. Only the kernel
C. Only the bootloader
D. User-space programs, libraries and configuration ✔

Correct answer: D. User-space programs, libraries and configuration

32. Init systems such as systemd or BusyBox init:

A. Load bootloaders
B. Design hardware
C. Start and manage system services ✔
D. Compile code

Correct answer: C. Start and manage system services

33. BusyBox provides:

A. A compiler
B. Many common Unix utilities in a single small executable ✔
C. A full desktop
D. A database

Correct answer: B. Many common Unix utilities in a single small executable

34. Cross-compilation means:

A. Interpreting code
B. Building code on one architecture to run on another ✔
C. Running two compilers
D. Compiling on the target only

Correct answer: B. Building code on one architecture to run on another

35. A cross-compiler toolchain includes:

A. Only an editor
B. Only Python
C. Only a debugger
D. Compiler, linker, assembler and libraries for the target ✔

Correct answer: D. Compiler, linker, assembler and libraries for the target

36. The Yocto Project is used to:

A. Build custom embedded Linux distributions ✔
B. Write documents
C. Edit images
D. Host websites

Correct answer: A. Build custom embedded Linux distributions

37. Buildroot is:

A. A database
B. A text editor
C. A GUI toolkit
D. A simple tool to generate embedded Linux systems ✔

Correct answer: D. A simple tool to generate embedded Linux systems

38. In Yocto, recipes (.bb files) describe:

A. Network rules
B. Hardware schematics
C. User manuals
D. How to fetch, configure and build software packages ✔

Correct answer: D. How to fetch, configure and build software packages

39. Yocto layers organise:

A. UI themes
B. Network VLANs
C. Physical PCB layers
D. Metadata such as recipes and configuration ✔

Correct answer: D. Metadata such as recipes and configuration

40. BitBake is:

A. The build engine used by Yocto ✔
B. A compiler
C. A shell
D. A bakery app

Correct answer: A. The build engine used by Yocto

41. The Linux kernel is configured using tools such as:

A. make menuconfig ✔
B. apt install
C. npm init
D. pip install

Correct answer: A. make menuconfig

42. Kernel modules (.ko files) allow:

A. Booting the bootloader
B. Running user apps only
C. Loading drivers and features into the kernel at runtime ✔
D. Editing files

Correct answer: C. Loading drivers and features into the kernel at runtime

43. insmod and modprobe are used to:

A. Delete files
B. Start networking only
C. Load kernel modules ✔
D. Compile apps

Correct answer: C. Load kernel modules

44. lsmod lists:

A. Currently loaded kernel modules ✔
B. Files in a directory
C. Running processes
D. Network interfaces

Correct answer: A. Currently loaded kernel modules

45. A device driver:

A. Is a filesystem
B. Is a bootloader
C. Is a user application
D. Lets the kernel communicate with hardware ✔

Correct answer: D. Lets the kernel communicate with hardware

46. Character device drivers transfer data:

A. As images only
B. As network packets
C. As a stream of bytes ✔
D. In fixed blocks

Correct answer: C. As a stream of bytes

47. Block device drivers handle:

A. Serial ports only
B. Storage devices accessed in blocks ✔
C. Keyboards only
D. LEDs only

Correct answer: B. Storage devices accessed in blocks

48. Device files are located in:

A. /var/log
B. /etc
C. /home
D. /dev ✔

Correct answer: D. /dev

49. The sysfs filesystem at /sys exposes:

A. User documents
B. Kernel objects and device attributes ✔
C. Web pages
D. Logs only

Correct answer: B. Kernel objects and device attributes

50. The procfs filesystem at /proc provides:

A. User files
B. Process and kernel information ✔
C. Packages
D. Images

Correct answer: B. Process and kernel information

Questions 51 to 75

51. GPIO can be accessed from user space via:

A. Email
B. Only BIOS
C. Only kernel recompilation
D. The libgpiod character device interface ✔

Correct answer: D. The libgpiod character device interface

52. I2C devices in Linux appear under:

A. /dev/i2c-* when the i2c-dev driver is loaded ✔
B. /tmp only
C. /etc/passwd
D. /home

Correct answer: A. /dev/i2c-* when the i2c-dev driver is loaded

53. Kernel space differs from user space because:

A. Kernel space runs apps only
B. Kernel code runs with full hardware privileges ✔
C. They are identical
D. User space has more privileges

Correct answer: B. Kernel code runs with full hardware privileges

54. System calls allow user programs to:

A. Request services from the kernel ✔
B. Access hardware directly always
C. Edit the bootloader
D. Bypass the kernel

Correct answer: A. Request services from the kernel

55. Real-time Linux patches such as PREEMPT_RT aim to:

A. Increase file size
B. Disable networking
C. Remove drivers
D. Reduce latency and improve determinism ✔

Correct answer: D. Reduce latency and improve determinism

56. Flash filesystems for raw NAND include:

A. UBIFS and JFFS2 ✔
B. NTFS
C. FAT12 only
D. HFS+

Correct answer: A. UBIFS and JFFS2

57. SquashFS is:

A. A writable database
B. A bootloader
C. A network protocol
D. A compressed read-only filesystem ✔

Correct answer: D. A compressed read-only filesystem

58. Overlay filesystems combine:

A. Two CPUs
B. Two bootloaders
C. Two kernels
D. A read-only base with a writable layer ✔

Correct answer: D. A read-only base with a writable layer

59. ext4 is commonly used on:

A. eMMC and SD card storage in embedded Linux ✔
B. ROM only
C. Registers
D. Raw NAND only

Correct answer: A. eMMC and SD card storage in embedded Linux

60. Over-the-air updates in embedded Linux often use:

A. No updates
B. Email attachments
C. A/B partition schemes for safe rollback ✔
D. Manual reflashing only

Correct answer: C. A/B partition schemes for safe rollback

61. SWUpdate, RAUC and Mender are:

A. Databases
B. Embedded Linux update frameworks ✔
C. Compilers
D. Text editors

Correct answer: B. Embedded Linux update frameworks

62. Secure boot ensures:

A. Any code runs
B. Only signed, trusted software runs ✔
C. No kernel loads
D. Faster booting only

Correct answer: B. Only signed, trusted software runs

63. Serial console access (UART) is used to:

A. Display graphics
B. Charge the device
C. View boot logs and interact with the system ✔
D. Connect Wi-Fi only

Correct answer: C. View boot logs and interact with the system

64. minicom and picocom are:

A. Serial terminal programs ✔
B. Compilers
C. Filesystems
D. Bootloaders

Correct answer: A. Serial terminal programs

65. SSH is used in embedded Linux to:

A. Flash bootloaders only
B. Edit images
C. Remotely log in and manage the device securely ✔
D. Compile kernels

Correct answer: C. Remotely log in and manage the device securely

66. GDB is used to:

A. Debug programs, including remotely via gdbserver ✔
B. Manage packages
C. Compile code
D. Edit text

Correct answer: A. Debug programs, including remotely via gdbserver

67. strace is used to:

A. Compile code
B. Format disks
C. Load modules
D. Trace system calls made by a process ✔

Correct answer: D. Trace system calls made by a process

68. dmesg shows:

A. Kernel ring buffer messages ✔
B. User files
C. Running services only
D. Network routes

Correct answer: A. Kernel ring buffer messages

69. top or htop shows:

A. Kernel source
B. Running processes and resource usage ✔
C. Bootloader logs
D. Device tree

Correct answer: B. Running processes and resource usage

70. journalctl is used with systemd to:

A. Compile code
B. Edit device trees
C. View system logs ✔
D. Load modules

Correct answer: C. View system logs

71. Shell scripting helps embedded engineers to:

A. Design PCBs
B. Automate startup and maintenance tasks ✔
C. Edit images
D. Write HTML only

Correct answer: B. Automate startup and maintenance tasks

72. Python on embedded Linux is useful for:

A. Hardware design
B. Rapid application development and scripting ✔
C. Kernel drivers only
D. Bootloaders

Correct answer: B. Rapid application development and scripting

73. Qt is used in embedded Linux for:

A. Building graphical user interfaces ✔
B. Bootloaders
C. Filesystems
D. Kernel scheduling

Correct answer: A. Building graphical user interfaces

74. Wayland and X11 are:

A. Filesystems
B. Bootloaders
C. Display server protocols for graphics ✔
D. Compilers

Correct answer: C. Display server protocols for graphics

75. Networking tools such as ip and ifconfig configure:

A. Filesystems
B. Bootloaders
C. Network interfaces ✔
D. Kernel modules

Correct answer: C. Network interfaces

Questions 76 to 100

76. NetworkManager or systemd-networkd manage:

A. Storage only
B. Audio only
C. Graphics
D. Network connections on Linux ✔

Correct answer: D. Network connections on Linux

77. Containers such as Docker can run on:

A. Bootloaders only
B. Some embedded Linux devices with enough resources ✔
C. 8-bit microcontrollers
D. BIOS

Correct answer: B. Some embedded Linux devices with enough resources

78. Raspberry Pi OS is:

A. A Windows edition
B. A bootloader
C. A Debian-based Linux distribution for Raspberry Pi ✔
D. A real-time microcontroller OS

Correct answer: C. A Debian-based Linux distribution for Raspberry Pi

79. BeagleBone boards are:

A. ARM-based single-board computers often used with embedded Linux ✔
B. GPUs
C. Microcontrollers without OS
D. Desktop PCs

Correct answer: A. ARM-based single-board computers often used with embedded Linux

80. NXP i.MX and TI Sitara processors are:

A. Memory chips
B. GPUs only
C. 8-bit MCUs
D. Popular SoCs for embedded Linux products ✔

Correct answer: D. Popular SoCs for embedded Linux products

81. An SoC (System on Chip) integrates:

A. Only RAM
B. CPU cores, GPU, memory controllers and peripherals on one chip ✔
C. Only storage
D. Only power

Correct answer: B. CPU cores, GPU, memory controllers and peripherals on one chip

82. Power management in embedded Linux includes:

A. CPU frequency scaling and suspend states ✔
B. Only maximum performance
C. Only fans
D. No control

Correct answer: A. CPU frequency scaling and suspend states

83. Boot time optimisation can involve:

A. Debug logs everywhere
B. Trimming services, kernel options and using faster storage ✔
C. Larger images
D. Adding more services

Correct answer: B. Trimming services, kernel options and using faster storage

84. Licensing matters in embedded Linux because:

A. Licences are optional
B. Linux is proprietary
C. No licences apply
D. GPL components have obligations such as sharing source code ✔

Correct answer: D. GPL components have obligations such as sharing source code

85. Security hardening includes:

A. Default passwords
B. Disabling unused services, applying updates and least privilege ✔
C. Open ports
D. Root login everywhere

Correct answer: B. Disabling unused services, applying updates and least privilege

86. Watchdog daemons in Linux can:

A. Display UI
B. Store files
C. Speed up CPUs
D. Reboot the system if it becomes unresponsive ✔

Correct answer: D. Reboot the system if it becomes unresponsive

87. Logging to flash storage should be limited because:

A. It speeds devices
B. Logs are useless
C. Excessive writes wear out flash memory ✔
D. Flash never wears

Correct answer: C. Excessive writes wear out flash memory

88. Read-only root filesystems improve:

A. Robustness against corruption and tampering ✔
B. Write speed
C. Debugging always
D. File size

Correct answer: A. Robustness against corruption and tampering

89. Board Support Package (BSP) provides:

A. Cases
B. Marketing material
C. Hardware-specific bootloader, kernel and drivers for a board ✔
D. User apps only

Correct answer: C. Hardware-specific bootloader, kernel and drivers for a board

90. Upstream kernel support is beneficial because:

A. Long-term maintenance and security updates are easier ✔
B. It reduces features
C. It is never needed
D. It removes drivers

Correct answer: A. Long-term maintenance and security updates are easier

91. Embedded Linux engineers need skills in:

A. Only accounting
B. Only graphic design
C. C programming, Linux internals, build systems and hardware interfaces ✔
D. Only marketing

Correct answer: C. C programming, Linux internals, build systems and hardware interfaces

92. The main advantage of embedded Linux is:

A. Hard real-time guarantees by default
B. Smallest possible memory footprint
C. No configuration needed
D. A powerful, open, feature-rich OS for complex embedded products ✔

Correct answer: D. A powerful, open, feature-rich OS for complex embedded products

93. The kernel image for ARM is often named:

A. zImage or Image ✔
B. kernel.doc
C. setup.exe
D. boot.jpg

Correct answer: A. zImage or Image

94. initramfs is:

A. A permanent disk
B. A GPU driver
C. A bootloader
D. An initial RAM-based filesystem used early in boot ✔

Correct answer: D. An initial RAM-based filesystem used early in boot

95. Systemd unit files define:

A. Hardware layouts
B. Device trees
C. Kernel modules
D. How services start, stop and depend on each other ✔

Correct answer: D. How services start, stop and depend on each other

96. The /etc directory stores:

A. Kernel images only
B. System configuration files ✔
C. User photos
D. Device drivers

Correct answer: B. System configuration files

97. Package managers such as opkg or apt on embedded Linux:

A. Edit device trees
B. Install and update software packages ✔
C. Compile kernels only
D. Flash bootloaders

Correct answer: B. Install and update software packages

98. eMMC is:

A. A network chip
B. A CPU
C. A display
D. Embedded MultiMediaCard flash storage soldered on the board ✔

Correct answer: D. Embedded MultiMediaCard flash storage soldered on the board

99. Kernel panics usually indicate:

A. A login
B. Normal operation
C. A finished update
D. A fatal kernel error requiring a reboot ✔

Correct answer: D. A fatal kernel error requiring a reboot

100. The command uname -r shows:

A. CPU temperature
B. The running kernel release version ✔
C. User list
D. Disk usage

Correct answer: B. The running kernel release version

How to Pass the Embedded Linux Development Exam

  • Read every question carefully; most options look similar, so look for the most precise answer.
  • Revise the questions above topic by topic rather than memorising letters, because option order can change in the live test.
  • You need 80 correct answers out of 100 to pass, so aim to understand at least 85 to stay safe.
  • If you do not clear it on the first attempt, review the questions you missed and use the retake option.

Frequently Asked Questions

How many questions are in the Embedded Linux Development Professional Certification exam?

The exam has 100 multiple-choice questions, each worth 1 mark.

What is the passing score for the Embedded Linux Development Professional Certification?

You need at least 80% (80 out of 100) to pass and receive the certificate.

Can I retake the Embedded Linux Development Professional Certification exam?

Yes. If you score below 80%, you can retry the test after reviewing the topics.

Is the Itronix certificate verifiable?

Yes. Every certificate issued by Itronix Solutions has a unique ID that can be checked on the Itronix verify-certificate page.

More Electronics & Hardware Certification Answers

Disclaimer: These answers are provided for learning and revision. Questions and answers are checked regularly; if you find a mistake, let us know in the comments.

About Priya Dogra

Priya Dogra runs priyadogra.com, where she shares free certification courses, internships, jobs, scholarships and exam preparation guides for Indian students and freshers. Follow her on YouTube, LinkedIn and Instagram for the latest opportunities.

Check Also

Unix/ Linux Certification exam answers 2026

Unix/ Linux Certification Exam Answers 2026 (All 100 Questions)

All 100 Unix/ Linux Certification exam questions with correct answers highlighted - updated 2026.

Leave a Reply

Your email address will not be published. Required fields are marked *