Computer Hardware and Networking Professional Certification exam answers 2026: This page lists all 100 questions of the official Computer Hardware and Networking Professional Certification exam by Itronix Solutions, each with its four answer options and the correct answer highlighted in green. Use it to revise every topic before you attempt the test and earn your verifiable certificate.
About this certification: This certification covers computer components, hardware assembly, and network configuration. It includes troubleshooting techniques and networking fundamentals like IP addressing and subnetting.
| Certification | Computer Hardware and Networking Professional Certification |
| Provider | Itronix Solutions |
| Category | Electronics & Hardware |
| Total questions | 100 multiple-choice questions |
| Marks | 1 mark per question (100 marks) |
| Passing score | 80% (80 out of 100) |
| Retake | Available if you do not pass |
| Certificate | Verifiable online certificate |
Take the exam: Computer Hardware and Networking Professional Certification on Itronix Solutions. See every other Itronix exam in our complete list of Itronix certification answers.
Computer Hardware and Networking Exam Questions and Answers
Questions 1 to 25
1. 1. Which component is considered the brain of the computer?
Correct answer: C. C) CPU
2. 2. Which type of memory is volatile and loses data when power is turned off?
Correct answer: B. B) RAM
3. 3. What is the primary function of the BIOS in a computer system?
Correct answer: B. B) Initialize and test hardware components
4. 4. Which cable type is used for high-speed internet connections in a wired LAN?
Correct answer: B. B) Ethernet (Cat5/Cat6)
5. 5. What does "IP" stand for in networking?
Correct answer: D. D) Internet Protocol
6. 6. What is the purpose of a router in a network?
Correct answer: B. B) Forward data packets between networks
7. 7. Which port is commonly used for HTTP traffic?
Correct answer: A. A) 80
8. 8. Which hardware component is responsible for rendering graphics on a display?
Correct answer: D. D) GPU
9. 9. What does SSD stand for?
Correct answer: C. C) Solid State Drive
10. 10. What is the function of DHCP in a network?
Correct answer: A. A) Assign IP addresses automatically
11. 11. Which network topology connects all devices in a circular pattern?
Correct answer: B. B) Ring
12. 12. What is the maximum transmission speed of a Cat6 Ethernet cable?
Correct answer: B. B) 1 Gbps
13. 13. Which layer of the OSI model is responsible for logical addressing and routing?
Correct answer: C. C) Network
14. 14. What does the acronym MAC in MAC address stand for?
Correct answer: C. C) Media Access Control
15. 15. Which hardware component supplies power to the motherboard and other components?
Correct answer: B. B) Power Supply Unit (PSU)
16. 16. Which type of network covers a large geographical area?
Correct answer: C. C) WAN
17. 17. What does DNS do in a network?
Correct answer: A. A) Translates domain names into IP addresses
18. 18. What is the function of a NIC in a computer?
Correct answer: C. C) Connect to a network
19. 19. What is the primary advantage of fiber optic cables over copper cables?
Correct answer: B. B) Higher data transfer speed
20. 20. What is the purpose of a firewall in a network?
Correct answer: A. A) Protect the network from unauthorized access
21. The CPU socket on a motherboard:
Correct answer: A. Holds and connects the processor
22. The chipset on a motherboard:
Correct answer: C. Manages data flow between the CPU, memory and peripherals
23. BIOS/UEFI settings are accessed by:
Correct answer: D. Pressing a key like Del or F2 during boot
24. UEFI improves on legacy BIOS by supporting:
Correct answer: B. Larger disks with GPT, secure boot and faster startup
25. POST stands for:
Correct answer: D. Power-On Self-Test
Questions 26 to 50
26. Beep codes during startup indicate:
Correct answer: A. Hardware errors detected during POST
27. The CMOS battery keeps:
Correct answer: B. BIOS settings and the system clock when powered off
28. Thermal paste is applied between:
Correct answer: C. The CPU and its heatsink
29. DDR4 and DDR5 are types of:
Correct answer: A. System memory (RAM)
30. Dual-channel memory configuration:
Correct answer: A. Increases memory bandwidth by using paired modules
31. ECC memory:
Correct answer: B. Detects and corrects memory errors, common in servers
32. SATA is an interface for:
Correct answer: A. Connecting storage drives
33. NVMe SSDs connect via:
Correct answer: C. PCI Express for very high speed
34. M.2 is:
Correct answer: B. A small form factor slot for SSDs and other cards
35. HDDs store data on:
Correct answer: A. Spinning magnetic platters
36. SSDs are faster than HDDs because they:
Correct answer: D. Have no moving parts and use flash memory
37. RAID 5 requires at least:
Correct answer: A. Three drives
38. RAID 5 provides:
Correct answer: D. Striping with distributed parity for fault tolerance
39. A PSU’s wattage rating should be:
Correct answer: C. Sufficient for all components with some headroom
40. 80 PLUS certification indicates:
Correct answer: A. Power supply efficiency
41. ATX is:
Correct answer: A. A standard motherboard and case form factor
42. PCIe slots are used for:
Correct answer: B. Expansion cards such as GPUs and NICs
43. A GPU’s VRAM is used for:
Correct answer: B. Storing graphics data like textures
44. HDMI and DisplayPort are:
Correct answer: A. Digital video interfaces
45. USB-C supports:
Correct answer: A. Reversible connections, data, video and power delivery
46. Thunderbolt provides:
Correct answer: A. High-speed data, display and power over a single port
47. ESD (electrostatic discharge) can be prevented by:
Correct answer: D. Using an anti-static wrist strap and mat
48. Before opening a PC case you should:
Correct answer: B. Power off and unplug the computer
49. Overheating symptoms include:
Correct answer: C. Random shutdowns and slow performance
50. A failing hard drive may produce:
Correct answer: B. Clicking noises and frequent errors
Questions 51 to 75
51. No display but fans spinning may indicate:
Correct answer: A. RAM, GPU or motherboard problems
52. Printer types include:
Correct answer: D. Laser, inkjet, thermal and impact
53. Laser printers use:
Correct answer: A. Toner and a fusing process
54. The fuser in a laser printer:
Correct answer: B. Melts toner onto the paper with heat and pressure
55. A network interface card (NIC):
Correct answer: A. Connects a computer to a network
56. A MAC address is assigned to:
Correct answer: D. A network interface
57. Ethernet cables with RJ45 connectors typically use:
Correct answer: D. Twisted pair copper wiring
58. The T568B standard defines:
Correct answer: B. The wire colour order for Ethernet connectors
59. A crossover cable was traditionally used to:
Correct answer: A. Connect two similar devices directly
60. A cable tester is used to:
Correct answer: A. Verify continuity and wiring of network cables
61. A crimping tool is used to:
Correct answer: D. Attach RJ45 connectors to cables
62. A patch panel is used to:
Correct answer: A. Organise and terminate network cables in a rack
63. Structured cabling refers to:
Correct answer: A. A standardised, organised cabling infrastructure
64. A switch operates mainly at:
Correct answer: D. Layer 2 of the OSI model
65. A router operates mainly at:
Correct answer: B. Layer 3 of the OSI model
66. A wireless access point:
Correct answer: D. Allows Wi-Fi devices to join a wired network
67. Wi-Fi 6 is also known as:
Correct answer: B. 802.11ax
68. Wi-Fi channel overlap in 2.4 GHz can be avoided by using:
Correct answer: C. Channels 1, 6 and 11
69. A Wi-Fi site survey helps to:
Correct answer: C. Plan access point placement and coverage
70. PoE (Power over Ethernet) powers devices such as:
Correct answer: A. IP cameras, phones and access points
71. A UPS provides:
Correct answer: D. Backup power during outages
72. A surge protector protects against:
Correct answer: A. Voltage spikes
73. ipconfig /all on Windows shows:
Correct answer: C. Detailed network configuration including MAC and DNS
74. ipconfig /release and /renew are used to:
Correct answer: B. Release and request a new DHCP address
75. ping 8.8.8.8 tests:
Correct answer: B. Connectivity to an external IP
Questions 76 to 100
76. If you can ping an IP but not a domain name, the issue is likely:
Correct answer: D. DNS
77. An APIPA address (169.254.x.x) suggests:
Correct answer: A. The device failed to get an address from DHCP
78. tracert or traceroute shows:
Correct answer: B. The path packets take to a destination
79. netstat helps to:
Correct answer: D. View active connections and listening ports
80. Mapping a network drive allows:
Correct answer: C. Accessing a shared folder as a drive letter
81. A workgroup network is:
Correct answer: D. A peer-to-peer network without central management
82. A Windows domain uses:
Correct answer: B. Active Directory for central authentication
83. Device Manager in Windows is used to:
Correct answer: B. View and manage hardware and drivers
84. Drivers are:
Correct answer: D. Software that lets the OS communicate with hardware
85. Disk Management in Windows allows:
Correct answer: B. Creating, formatting and resizing partitions
86. NTFS is:
Correct answer: B. The standard Windows file system with permissions and journaling
87. FAT32 has a maximum single file size of:
Correct answer: C. 4 GB
88. Imaging a computer means:
Correct answer: B. Creating a full copy of a system disk for deployment or backup
89. Virtualisation requires the CPU feature:
Correct answer: C. Intel VT-x or AMD-V
90. Preventive maintenance includes:
Correct answer: A. Cleaning dust, updating firmware and checking backups
91. Documentation of hardware assets helps to:
Correct answer: D. Track inventory, warranties and configurations
92. The troubleshooting methodology starts with:
Correct answer: D. Identifying the problem
93. After resolving an issue, a technician should:
Correct answer: C. Verify functionality and document the solution
94. CompTIA A+ certifies:
Correct answer: A. Entry-level IT hardware and support skills
95. CompTIA Network+ certifies:
Correct answer: C. Networking fundamentals
96. The main role of a hardware and networking professional is to:
Correct answer: D. Install, maintain and troubleshoot computers and networks
97. A KVM switch allows:
Correct answer: A. Controlling multiple computers with one keyboard, video and mouse
98. A loopback plug is used to:
Correct answer: B. Test network or serial ports
99. A multimeter measures:
Correct answer: D. Voltage, current and resistance
100. Fibre optic connectors include:
Correct answer: B. LC and SC
How to Pass the Computer Hardware and Networking Exam
- Read every question carefully; most options look similar, so look for the most precise answer.
- Revise the questions above topic by topic rather than memorising letters, because option order can change in the live test.
- You need 80 correct answers out of 100 to pass, so aim to understand at least 85 to stay safe.
- If you do not clear it on the first attempt, review the questions you missed and use the retake option.
Frequently Asked Questions
How many questions are in the Computer Hardware and Networking Professional Certification exam?
The exam has 100 multiple-choice questions, each worth 1 mark.
What is the passing score for the Computer Hardware and Networking Professional Certification?
You need at least 80% (80 out of 100) to pass and receive the certificate.
Can I retake the Computer Hardware and Networking Professional Certification exam?
Yes. If you score below 80%, you can retry the test after reviewing the topics.
Is the Itronix certificate verifiable?
Yes. Every certificate issued by Itronix Solutions has a unique ID that can be checked on the Itronix verify-certificate page.
More Electronics & Hardware Certification Answers
- Computer Architecture and Organization Professional Certification Exam Answers
- Embedded Linux Development Professional Certification Exam Answers
- Embedded Systems Design Professional Certification Exam Answers
- FPGA Design Professional Certification Exam Answers
- Hardware Security Professional Certification Exam Answers
- IOT – Internet of Things Certification Exam Answers
- IoT Hardware Development Professional Certification Exam Answers
- Microprocessor and Microcontroller Programming Professional Certification Exam Answers
Disclaimer: These answers are provided for learning and revision. Questions and answers are checked regularly; if you find a mistake, let us know in the comments.
Priya Dogra – Free Certifications, Exam Answers & Career Guides Free certification exam answers, courses, scholarships and career guides for learners worldwide