VLSI Design Professional Certification exam answers 2026: This page lists all 100 questions of the official VLSI Design Professional Certification exam by Itronix Solutions, each with its four answer options and the correct answer highlighted in green. Use it to revise every topic before you attempt the test and earn your verifiable certificate.
About this certification: This certification focuses on Very Large Scale Integration (VLSI) design, covering chip architecture, logic design, and semiconductor technology. Ideal for electronics engineers, it prepares you for designing complex integrated circuits.
| Certification | VLSI Design Professional Certification |
| Provider | Itronix Solutions |
| Category | Electronics & Hardware |
| Total questions | 100 multiple-choice questions |
| Marks | 1 mark per question (100 marks) |
| Passing score | 80% (80 out of 100) |
| Retake | Available if you do not pass |
| Certificate | Verifiable online certificate |
Take the exam: VLSI Design Professional Certification on Itronix Solutions. See every other Itronix exam in our complete list of Itronix certification answers.
VLSI Design Exam Questions and Answers
Questions 1 to 25
1. What does VLSI stand for?
Correct answer: C. C) Very Large Scale Integration
2. Which technology is commonly used for VLSI fabrication?
Correct answer: A. A) CMOS (Complementary Metal-Oxide-Semiconductor)
3. What is the primary advantage of using CMOS technology in VLSI design?
Correct answer: D. D) Low power consumption
4. What does ASIC stand for in VLSI design?
Correct answer: A. A) Application-Specific Integrated Circuit
5. In MOSFETs, what controls the flow of current between the source and drain?
Correct answer: D. D) Gate
6. What is the primary function of a flip-flop in a digital circuit?
Correct answer: D. D) To store binary data
7. What type of logic gate produces a HIGH output only when all inputs are HIGH?
Correct answer: A. A) AND
8. What is the purpose of a clock signal in a synchronous digital circuit?
Correct answer: C. C) To synchronize operations
9. Which type of memory is used in VLSI design for high-speed data access?
Correct answer: A. A) SRAM (Static Random-Access Memory)
10. What does HDL stand for in VLSI design?
Correct answer: A. A) Hardware Description Language
11. Which of the following is an example of an HDL used for VLSI design?
Correct answer: A. A) Verilog
12. What is the function of a multiplexer in a digital circuit?
Correct answer: C. C) To select one input from multiple inputs
13. What is the purpose of the layout design step in VLSI?
Correct answer: B. B) To create a physical representation of the circuit
14. What is the function of an inverter in a digital circuit?
Correct answer: A. A) To reverse the input signal
15. What is the full form of FPGA in VLSI design?
Correct answer: C. C) Field Programmable Gate Array
16. What is the main advantage of using an FPGA over an ASIC?
Correct answer: C. C) Reconfigurability
17. What is the role of parasitic capacitance in VLSI circuits?
Correct answer: B. B) Affects signal propagation and speed
18. What is the primary disadvantage of dynamic logic in VLSI design?
Correct answer: C. C) Susceptibility to noise
19. What is the function of a latch in a digital circuit?
Correct answer: C. C) To store a single bit of data
20. What is meant by "scaling" in VLSI technology?
Correct answer: C. C) Reducing transistor size to improve performance
21. VLSI stands for:
Correct answer: B. Very Large Scale Integration
22. VLSI refers to:
Correct answer: B. Integrating millions or billions of transistors on a single chip
23. CMOS stands for:
Correct answer: A. Complementary Metal-Oxide-Semiconductor
24. CMOS logic is popular because of:
Correct answer: A. Low static power consumption
25. A MOSFET is:
Correct answer: D. A field-effect transistor used as a switch or amplifier
Questions 26 to 50
26. An NMOS transistor conducts when:
Correct answer: C. Its gate voltage is high relative to the source
27. A PMOS transistor conducts when:
Correct answer: B. Its gate voltage is low relative to the source
28. A CMOS inverter uses:
Correct answer: B. One PMOS and one NMOS transistor
29. Moore’s Law observed that:
Correct answer: D. Transistor counts on chips roughly double every two years
30. Technology node (e.g. 5 nm) refers to:
Correct answer: B. The process generation of semiconductor manufacturing
31. Digital logic gates include:
Correct answer: C. AND, OR, NOT, NAND, NOR, XOR and XNOR
32. NAND and NOR are called universal gates because:
Correct answer: C. Any logic function can be built from them alone
33. An XOR gate outputs 1 when:
Correct answer: B. Inputs are different
34. Boolean algebra is used to:
Correct answer: A. Simplify and analyse logic circuits
35. A Karnaugh map is used to:
Correct answer: B. Simplify Boolean expressions
36. Combinational logic outputs depend on:
Correct answer: C. Current inputs only
37. Sequential logic outputs depend on:
Correct answer: B. Current inputs and stored state
38. A multiplexer:
Correct answer: D. Selects one of several inputs to the output
39. A decoder:
Correct answer: A. Converts binary input into one active output line
40. A half adder adds:
Correct answer: A. Two single bits producing sum and carry
41. A full adder adds:
Correct answer: B. Two bits plus a carry-in
42. A flip-flop is:
Correct answer: D. A basic memory element storing one bit
43. A D flip-flop captures:
Correct answer: A. The input value at the clock edge
44. A register is:
Correct answer: A. A group of flip-flops storing a multi-bit value
45. A counter is:
Correct answer: A. A sequential circuit that cycles through states
46. A finite state machine (FSM) consists of:
Correct answer: A. States, transitions and outputs
47. Moore machine outputs depend on:
Correct answer: B. The current state only
48. Mealy machine outputs depend on:
Correct answer: A. Current state and inputs
49. Setup time is:
Correct answer: A. The time data must be stable before the clock edge
50. Hold time is:
Correct answer: B. The time data must remain stable after the clock edge
Questions 51 to 75
51. Clock skew is:
Correct answer: B. Difference in clock arrival times at different flip-flops
52. Metastability can occur when:
Correct answer: D. Setup or hold times are violated, e.g. at asynchronous inputs
53. Synchronisers (two flip-flops) are used to:
Correct answer: B. Reduce metastability when crossing clock domains
54. HDL stands for:
Correct answer: C. Hardware Description Language
55. Common HDLs include:
Correct answer: C. Verilog, SystemVerilog and VHDL
56. RTL stands for:
Correct answer: A. Register Transfer Level
57. Synthesis converts:
Correct answer: C. RTL code into a gate-level netlist
58. In Verilog, a module is:
Correct answer: A. The basic building block describing hardware
59. In Verilog, always @(posedge clk) describes:
Correct answer: D. Logic triggered on the rising clock edge
60. Non-blocking assignment (<=) in Verilog is used for:
Correct answer: D. Sequential logic
61. Blocking assignment (=) in Verilog is typically used for:
Correct answer: D. Combinational logic
62. A testbench is used to:
Correct answer: B. Simulate and verify a design
63. Functional verification checks:
Correct answer: B. That the design behaves according to specification
64. UVM is:
Correct answer: D. A verification methodology for SystemVerilog
65. Static Timing Analysis checks:
Correct answer: A. Whether timing constraints are met without simulation
66. The ASIC design flow includes:
Correct answer: B. Specification, RTL, verification, synthesis, place and route, and sign-off
67. ASIC stands for:
Correct answer: B. Application-Specific Integrated Circuit
68. An FPGA is:
Correct answer: A. A reprogrammable integrated circuit made of configurable logic blocks
69. FPGAs are configured using:
Correct answer: D. A bitstream generated from HDL
70. LUTs in FPGAs implement:
Correct answer: B. Combinational logic functions
71. FPGA vendors include:
Correct answer: C. AMD (Xilinx) and Intel (Altera)
72. Vivado and Quartus are:
Correct answer: B. FPGA design tools
73. Advantages of FPGAs over ASICs include:
Correct answer: B. Reconfigurability and faster time to market
74. Place and route determines:
Correct answer: C. Physical location of cells and wiring between them
75. DRC (Design Rule Check) verifies:
Correct answer: A. Layout meets manufacturing rules
Questions 76 to 100
76. LVS (Layout Versus Schematic) checks:
Correct answer: B. That the layout matches the schematic netlist
77. Dynamic power in CMOS is proportional to:
Correct answer: D. Capacitance, voltage squared and frequency
78. Clock gating reduces:
Correct answer: B. Dynamic power by disabling clocks to idle logic
79. DFT stands for:
Correct answer: D. Design for Testability
80. Scan chains are used to:
Correct answer: B. Improve testability of sequential logic
81. Computer architecture describes:
Correct answer: D. The structure and behaviour of a computer system as seen by programmers
82. The von Neumann architecture uses:
Correct answer: D. A shared memory for instructions and data
83. The Harvard architecture uses:
Correct answer: B. Separate memories for instructions and data
84. The ALU performs:
Correct answer: B. Arithmetic and logical operations
85. The control unit:
Correct answer: A. Directs the operation of the processor
86. Pipelining improves:
Correct answer: D. Instruction throughput by overlapping stages
87. A pipeline hazard is:
Correct answer: A. A situation that prevents the next instruction from executing in its cycle
88. Cache memory is:
Correct answer: B. Small, fast memory close to the CPU
89. A cache hit means:
Correct answer: C. Requested data is found in the cache
90. RISC architectures emphasise:
Correct answer: B. Simple instructions executed quickly
91. ARM and RISC-V are examples of:
Correct answer: A. RISC instruction set architectures
92. x86 is generally classified as:
Correct answer: D. CISC
93. Hardware security threats include:
Correct answer: A. Side-channel attacks, hardware Trojans and fault injection
94. A side-channel attack exploits:
Correct answer: A. Physical leakage such as power use, timing or electromagnetic emissions
95. A hardware Trojan is:
Correct answer: D. A malicious modification to circuitry
96. A TPM (Trusted Platform Module) provides:
Correct answer: C. Secure key storage and platform integrity measurement
97. PCB design involves:
Correct answer: D. Schematic capture, component placement and routing traces
98. Gerber files are used to:
Correct answer: D. Manufacture PCBs
99. The main aim of digital hardware design is to:
Correct answer: D. Create reliable, efficient circuits that meet functional, timing and power goals
100. A wafer in semiconductor manufacturing is:
Correct answer: A. A thin slice of silicon on which chips are fabricated
How to Pass the VLSI Design Exam
- Read every question carefully; most options look similar, so look for the most precise answer.
- Revise the questions above topic by topic rather than memorising letters, because option order can change in the live test.
- You need 80 correct answers out of 100 to pass, so aim to understand at least 85 to stay safe.
- If you do not clear it on the first attempt, review the questions you missed and use the retake option.
Frequently Asked Questions
How many questions are in the VLSI Design Professional Certification exam?
The exam has 100 multiple-choice questions, each worth 1 mark.
What is the passing score for the VLSI Design Professional Certification?
You need at least 80% (80 out of 100) to pass and receive the certificate.
Can I retake the VLSI Design Professional Certification exam?
Yes. If you score below 80%, you can retry the test after reviewing the topics.
Is the Itronix certificate verifiable?
Yes. Every certificate issued by Itronix Solutions has a unique ID that can be checked on the Itronix verify-certificate page.
More Electronics & Hardware Certification Answers
- Computer Architecture and Organization Professional Certification Exam Answers
- Computer Hardware and Networking Professional Certification Exam Answers
- Embedded Linux Development Professional Certification Exam Answers
- Embedded Systems Design Professional Certification Exam Answers
- FPGA Design Professional Certification Exam Answers
- Hardware Security Professional Certification Exam Answers
- IOT – Internet of Things Certification Exam Answers
- IoT Hardware Development Professional Certification Exam Answers
Disclaimer: These answers are provided for learning and revision. Questions and answers are checked regularly; if you find a mistake, let us know in the comments.
Priya Dogra – Free Certifications, Exam Answers & Career Guides Free certification exam answers, courses, scholarships and career guides for learners worldwide