Wednesday , November 18 2026
Breaking News

Certified Quality Engineer Professional Certification Exam Answers 2026 (All 100 Questions)

Certified Quality Engineer Professional Certification exam answers 2026: This page lists all 100 questions of the official Certified Quality Engineer Professional Certification exam by Itronix Solutions, each with its four answer options and the correct answer highlighted in green. Use it to revise every topic before you attempt the test and earn your verifiable certificate.

About this certification: The Certified Quality Engineer (CQE) is a professional certification offered by the Itronix Solutions .

Certification Certified Quality Engineer Professional Certification
Provider Itronix Solutions
Category Programming & Development
Total questions 100 multiple-choice questions
Marks 1 mark per question (100 marks)
Passing score 80% (80 out of 100)
Retake Available if you do not pass
Certificate Verifiable online certificate

Take the exam: Certified Quality Engineer Professional Certification on Itronix Solutions. See every other Itronix exam in our complete list of Itronix certification answers.

Certified Quality Engineer Exam Questions and Answers

Questions 1 to 25

1. What is the minimum number of years of professional experience required to be eligible for the CQE exam?

A. 1 year
B. 2 years
C. 3 years ✔
D. 5 years

Correct answer: C. 3 years

2. Which of the following is NOT one of the main domains covered in the CQE exam?

A. Quality Management and Leadership
B. Quality Tools and Techniques
C. Risk Management ✔
D. Statistics and Data Analysis

Correct answer: C. Risk Management

3. To maintain the CQE certification, how many Recertification Units (RUs) must a certified professional earn within a three-year certification cycle?

A. 10 RUs
B. 15 RUs ✔
C. 20 RUs
D. 25 RUs

Correct answer: B. 15 RUs

4. Which statistical tool is commonly used for analyzing the variation in a process and identifying potential areas for improvement?

A. Pareto Chart
B. Scatter Plot
C. Control Chart ✔
D. Gantt Chart

Correct answer: C. Control Chart

5. What is the primary purpose of a Design of Experiments (DOE) in quality engineering?

A. To detect defects in finished products
B. To improve the efficiency of manufacturing processes
C. To optimize product designs and processes ✔
D. To measure customer satisfaction

Correct answer: C. To optimize product designs and processes

6. In the context of quality management, what does the acronym DMAIC stand for?

A. Define, Measure, Analyze, Improve, Control ✔
B. Design, Manufacture, Assemble, Inspect, Certify
C. Document, Manage, Assess, Implement, Communicate
D. Data, Metrics, Analysis, Inspection, Certification

Correct answer: A. Define, Measure, Analyze, Improve, Control

7. Which quality management pioneer is known for the 14 Points for Total Quality Management (TQM)?

A. Joseph Juran
B. W. Edwards Deming ✔
C. Philip Crosby
D. Kaoru Ishikawa

Correct answer: B. W. Edwards Deming

8. What is the main objective of a Failure Mode and Effects Analysis (FMEA

A. To identify and prioritize potential failure modes in a process or product ✔
B. To analyze historical data of failures in a manufacturing facility
C. To assess the financial impact of product recalls
D. To calculate the return on investment (ROI) of quality initiatives

Correct answer: A. To identify and prioritize potential failure modes in a process or product

9. Which tool is commonly used to visualize the sequence of steps in a process and identify areas for improvement?

A. Fishbone Diagram (Ishikawa Diagram)
B. Scatter Plot
C. Flowchart ✔
D. Histogram

Correct answer: C. Flowchart

10. Which of the following quality management standards is recognized internationally and focuses on environmental management systems?

A. ISO 9001
B. ISO 14001 ✔
C. ISO 27001
D. ISO 45001

Correct answer: B. ISO 14001

11. What is the primary purpose of a Gage R&R (Gage Repeatability and Reproducibility) study?

A. To determine the cost of quality in a manufacturing process
B. To evaluate the precision and accuracy of a measurement system ✔
C. To analyze customer complaints and feedback
D. To optimize the supply chain

Correct answer: B. To evaluate the precision and accuracy of a measurement system

12. In the context of quality improvement, what does the acronym PDPC stand for?

A. Process Diagram for Problem Clarification ✔
B. Product Design and Process Control
C. Probability Density and Process Capability
D. Project Definition and Process Control

Correct answer: A. Process Diagram for Problem Clarification

13. Which quality control chart is used to monitor the number of defects or nonconformities in a sample over time?

A. Pareto Chart
B. Control Chart ✔
C. Scatter Plot
D. Histogram

Correct answer: B. Control Chart

14. What type of data is typically represented by discrete values and can be counted, but not measured on a continuous scale?

A. Continuous data
B. Qualitative data
C. Categorical data ✔
D. Ordinal data

Correct answer: C. Categorical data

15. Which of the following is NOT a key element of the Plan-Do-Check-Act (PDCA) cycle?

A. Plan
B. Train ✔
C. Do
D. Act

Correct answer: B. Train

16. Quality is commonly defined as:

A. Most features
B. Fitness for use or conformance to requirements ✔
C. Fastest delivery only
D. Highest price

Correct answer: B. Fitness for use or conformance to requirements

17. Total Quality Management (TQM) emphasises:

A. Inspection only at the end
B. Organisation-wide continuous improvement and customer focus ✔
C. Cost cutting only
D. Individual blame

Correct answer: B. Organisation-wide continuous improvement and customer focus

18. Who is associated with the 14 Points for management?

A. W. Edwards Deming ✔
B. Joseph Juran
C. Philip Crosby
D. Kaoru Ishikawa

Correct answer: A. W. Edwards Deming

19. Joseph Juran’s quality trilogy consists of:

A. Quality planning, quality control and quality improvement ✔
B. Plan, do, check
C. Cost, time, scope
D. Design, build, test

Correct answer: A. Quality planning, quality control and quality improvement

20. Philip Crosby is known for the concept of:

A. Kanban
B. Kaizen events
C. Six Sigma
D. Zero defects ✔

Correct answer: D. Zero defects

21. The PDCA cycle stands for:

A. Plan, Develop, Correct, Analyse
B. Process, Design, Check, Approve
C. Plan, Do, Check, Act ✔
D. Prepare, Deliver, Control, Audit

Correct answer: C. Plan, Do, Check, Act

22. Kaizen means:

A. Radical redesign only
B. Continuous incremental improvement ✔
C. Final inspection
D. Zero inventory

Correct answer: B. Continuous incremental improvement

23. The cost of quality includes:

A. Only material costs
B. Prevention, appraisal, internal failure and external failure costs ✔
C. Only wages
D. Only marketing

Correct answer: B. Prevention, appraisal, internal failure and external failure costs

24. Prevention costs include:

A. Customer returns
B. Warranty claims
C. Scrap
D. Training and process planning ✔

Correct answer: D. Training and process planning

25. Appraisal costs include:

A. Rework
B. Inspection and testing ✔
C. Recalls
D. Customer complaints

Correct answer: B. Inspection and testing

Questions 26 to 50

26. Internal failure costs occur:

A. During marketing
B. During hiring
C. Before the product reaches the customer ✔
D. After delivery

Correct answer: C. Before the product reaches the customer

27. External failure costs include:

A. Training
B. Process design
C. Warranty claims and returns ✔
D. Inspection

Correct answer: C. Warranty claims and returns

28. ISO 9001 is a standard for:

A. Food safety only
B. Quality management systems ✔
C. Environmental management
D. Information security

Correct answer: B. Quality management systems

29. ISO 14001 relates to:

A. Environmental management systems ✔
B. Quality management
C. Occupational safety
D. IT services

Correct answer: A. Environmental management systems

30. An internal audit is conducted by:

A. Regulators only
B. The organisation itself to check its own system ✔
C. Customers only
D. A certification body only

Correct answer: B. The organisation itself to check its own system

31. A nonconformity is:

A. A customer compliment
B. A design idea
C. A failure to meet a specified requirement ✔
D. An approved deviation

Correct answer: C. A failure to meet a specified requirement

32. Corrective action aims to:

A. Hide defects
B. Eliminate the cause of a detected nonconformity ✔
C. Blame staff
D. Increase inspection only

Correct answer: B. Eliminate the cause of a detected nonconformity

33. Preventive action aims to:

A. Add paperwork only
B. Delay decisions
C. Fix only existing defects
D. Eliminate the cause of a potential nonconformity ✔

Correct answer: D. Eliminate the cause of a potential nonconformity

34. Root cause analysis seeks to:

A. Identify the fundamental cause of a problem ✔
B. Fix symptoms only
C. Find someone to blame
D. Increase output

Correct answer: A. Identify the fundamental cause of a problem

35. The 5 Whys technique involves:

A. Repeatedly asking why to reach the root cause ✔
B. Five audits
C. Asking five people
D. Five inspections

Correct answer: A. Repeatedly asking why to reach the root cause

36. A fishbone diagram is also called:

A. Histogram
B. Ishikawa or cause-and-effect diagram ✔
C. Control chart
D. Pareto chart

Correct answer: B. Ishikawa or cause-and-effect diagram

37. Common fishbone categories (6M) include:

A. Plan, Do, Check
B. Cost, Time, Scope
C. Money, Market, Media only
D. Man, Machine, Method, Material, Measurement and Mother Nature ✔

Correct answer: D. Man, Machine, Method, Material, Measurement and Mother Nature

38. A Pareto chart is based on the principle that:

A. A few causes account for most problems ✔
B. Only one cause exists
C. All causes are equal
D. Problems are random

Correct answer: A. A few causes account for most problems

39. The Pareto principle is often called the:

A. 80/20 rule ✔
B. 50/50 rule
C. 90/10 law
D. Six Sigma rule

Correct answer: A. 80/20 rule

40. A check sheet is used to:

A. Collect and tally data systematically ✔
B. Calculate profit
C. Design products
D. Train staff

Correct answer: A. Collect and tally data systematically

41. A histogram shows:

A. The frequency distribution of data ✔
B. Process steps
C. Correlation only
D. Cause and effect

Correct answer: A. The frequency distribution of data

42. A scatter diagram shows:

A. Frequency only
B. The relationship between two variables ✔
C. Defect categories
D. Process flow

Correct answer: B. The relationship between two variables

43. A flowchart shows:

A. The sequence of steps in a process ✔
B. Defect frequency
C. Control limits
D. Costs

Correct answer: A. The sequence of steps in a process

44. A control chart is used to:

A. Monitor process stability over time ✔
B. Draw organisational charts
C. Store data
D. Calculate taxes

Correct answer: A. Monitor process stability over time

45. Control limits are typically set at:

A. Customer specification limits
B. Plus or minus three standard deviations from the mean ✔
C. Zero
D. Plus or minus one unit

Correct answer: B. Plus or minus three standard deviations from the mean

46. Specification limits are defined by:

A. Process data only
B. Customer or design requirements ✔
C. Control charts
D. Random choice

Correct answer: B. Customer or design requirements

47. Common cause variation is:

A. Always a defect
B. Variation from a special event
C. Ignorable always
D. Natural, inherent variation in a stable process ✔

Correct answer: D. Natural, inherent variation in a stable process

48. Special cause variation is:

A. Desired variation
B. Variation from an assignable, unusual source ✔
C. Customer preference
D. Normal background noise

Correct answer: B. Variation from an assignable, unusual source

49. An X-bar and R chart is used for:

A. Count of defects only
B. Costs
C. Variables data in subgroups ✔
D. Attribute pass/fail only

Correct answer: C. Variables data in subgroups

50. A p-chart monitors:

A. Individual measurements
B. Ranges
C. The proportion of defective units ✔
D. Mean values

Correct answer: C. The proportion of defective units

Questions 51 to 75

51. A c-chart monitors:

A. The count of defects per unit or area ✔
B. Ranges
C. Means
D. Proportions

Correct answer: A. The count of defects per unit or area

52. A point outside control limits suggests:

A. No action needed
B. The process is perfect
C. A special cause may be present ✔
D. Specifications changed

Correct answer: C. A special cause may be present

53. Process capability compares:

A. Process variation with specification limits ✔
B. Sales with targets
C. Price with cost
D. Staff with machines

Correct answer: A. Process variation with specification limits

54. Cp measures:

A. Defect count
B. Actual sales
C. Cycle time
D. Potential capability assuming the process is centred ✔

Correct answer: D. Potential capability assuming the process is centred

55. Cpk accounts for:

A. Only the mean
B. Only customer complaints
C. Only spread
D. Both process spread and centring ✔

Correct answer: D. Both process spread and centring

56. A Cpk of at least 1.33 is often considered:

A. Perfect
B. Irrelevant
C. Unacceptable
D. Capable for many industries ✔

Correct answer: D. Capable for many industries

57. Six Sigma aims for about:

A. Zero measurements
B. 3.4 defects per million opportunities ✔
C. 1 defect per hundred
D. 50 percent yield

Correct answer: B. 3.4 defects per million opportunities

58. DMAIC stands for:

A. Document, Measure, Audit, Improve, Comply
B. Define, Measure, Analyse, Improve, Control ✔
C. Decide, Manage, Act, Implement, Check
D. Design, Make, Assess, Inspect, Correct

Correct answer: B. Define, Measure, Analyse, Improve, Control

59. DMADV is used for:

A. Auditing
B. Fixing existing processes only
C. Accounting
D. Designing new processes or products ✔

Correct answer: D. Designing new processes or products

60. Lean focuses on:

A. Eliminating waste and improving flow ✔
B. Increasing inventory
C. Adding inspection steps
D. Longer lead times

Correct answer: A. Eliminating waste and improving flow

61. The 8 wastes in Lean include:

A. Training and planning
B. Defects, overproduction, waiting and excess inventory ✔
C. Quality audits
D. Customer feedback

Correct answer: B. Defects, overproduction, waiting and excess inventory

62. 5S stands for:

A. Safety, Speed, Service, Savings, Style
B. Sort, Set in order, Shine, Standardise, Sustain ✔
C. Scan, Sort, Ship, Store, Sell
D. Stop, See, Solve, Share, Save

Correct answer: B. Sort, Set in order, Shine, Standardise, Sustain

63. Poka-yoke means:

A. Mistake-proofing ✔
B. Visual management
C. Rapid changeover
D. Waste removal

Correct answer: A. Mistake-proofing

64. SMED aims to:

A. Increase batch sizes
B. Eliminate training
C. Add inspections
D. Reduce setup or changeover time ✔

Correct answer: D. Reduce setup or changeover time

65. Value stream mapping is used to:

A. Plan holidays
B. Visualise material and information flow to find waste ✔
C. Draw org charts
D. Map sales territories

Correct answer: B. Visualise material and information flow to find waste

66. FMEA stands for:

A. Factory Maintenance Equipment Audit
B. Formal Measurement Error Assessment
C. Failure Mode and Effects Analysis ✔
D. Final Manufacturing Evaluation Audit

Correct answer: C. Failure Mode and Effects Analysis

67. In FMEA, RPN equals:

A. Cost x Time
B. Severity x Occurrence x Detection ✔
C. Defects x Units
D. Price x Volume

Correct answer: B. Severity x Occurrence x Detection

68. APQP is a framework for:

A. Annual profit quality planning
B. Advanced product quality planning ✔
C. Automated production queue planning
D. Audit procedure quality process

Correct answer: B. Advanced product quality planning

69. PPAP is used to:

A. Pay suppliers
B. Hire staff
C. Approve production parts from suppliers ✔
D. Plan advertising

Correct answer: C. Approve production parts from suppliers

70. Design of Experiments (DOE) helps to:

A. Determine how factors affect a response efficiently ✔
B. Audit suppliers
C. Draw org charts
D. Write procedures

Correct answer: A. Determine how factors affect a response efficiently

71. A factorial experiment studies:

A. One factor at a time only
B. Multiple factors and their interactions together ✔
C. No factors
D. Only costs

Correct answer: B. Multiple factors and their interactions together

72. Measurement System Analysis (MSA) evaluates:

A. Marketing reach
B. IT security
C. Sales systems
D. The accuracy and precision of measurement systems ✔

Correct answer: D. The accuracy and precision of measurement systems

73. Gage R&R assesses:

A. Rate and range of sales
B. Repeatability and reproducibility of measurements ✔
C. Risk and reward
D. Revenue and returns

Correct answer: B. Repeatability and reproducibility of measurements

74. Accuracy refers to:

A. Consistency of repeated measurements only
B. Speed of measuring
C. Cost of gauges
D. Closeness of a measurement to the true value ✔

Correct answer: D. Closeness of a measurement to the true value

75. Precision refers to:

A. Closeness to the true value
B. Consistency of repeated measurements ✔
C. Gauge cost
D. Measurement speed

Correct answer: B. Consistency of repeated measurements

Questions 76 to 100

76. Calibration ensures that:

A. Costs are low
B. Operators are trained
C. Instruments look clean
D. Instruments measure correctly against known standards ✔

Correct answer: D. Instruments measure correctly against known standards

77. Acceptance sampling is used to:

A. Avoid inspection
B. Inspect every unit always
C. Calculate taxes
D. Decide whether to accept a lot based on a sample ✔

Correct answer: D. Decide whether to accept a lot based on a sample

78. AQL stands for:

A. Average Quantity Lost
B. Acceptable Quality Level (or Limit) ✔
C. Approved Quality List
D. Annual Quality Log

Correct answer: B. Acceptable Quality Level (or Limit)

79. Producer’s risk is the risk of:

A. Losing a supplier
B. Rejecting a good lot ✔
C. Overpaying
D. Accepting a bad lot

Correct answer: B. Rejecting a good lot

80. Consumer’s risk is the risk of:

A. Accepting a bad lot ✔
B. Rejecting a good lot
C. Price increase
D. Delayed delivery

Correct answer: A. Accepting a bad lot

81. An OC curve shows:

A. Cost curves
B. Organisational charts
C. Sales trends
D. Probability of accepting lots at different quality levels ✔

Correct answer: D. Probability of accepting lots at different quality levels

82. Supplier quality management involves:

A. Selecting, monitoring and developing suppliers ✔
B. Ignoring suppliers
C. Only payments
D. Only price negotiation

Correct answer: A. Selecting, monitoring and developing suppliers

83. A quality manual documents:

A. Employee salaries
B. The scope and structure of the quality management system ✔
C. Marketing plans
D. Sales targets

Correct answer: B. The scope and structure of the quality management system

84. Document control ensures:

A. Documents are deleted
B. All versions are mixed
C. Only current approved documents are in use ✔
D. No reviews happen

Correct answer: C. Only current approved documents are in use

85. Traceability allows:

A. Price comparison
B. Tracking a product’s history, location and components ✔
C. Hiding origins
D. Faster sales only

Correct answer: B. Tracking a product’s history, location and components

86. Customer satisfaction can be measured through:

A. Surveys, complaints and retention data ✔
B. Only internal opinions
C. Guesswork
D. Stock prices

Correct answer: A. Surveys, complaints and retention data

87. Voice of the Customer (VOC) captures:

A. Machine data only
B. Supplier prices
C. Employee complaints only
D. Customer needs and expectations ✔

Correct answer: D. Customer needs and expectations

88. Quality Function Deployment (QFD) translates:

A. Customer requirements into design specifications ✔
B. Policies into laws
C. Prices into costs
D. Data into charts only

Correct answer: A. Customer requirements into design specifications

89. Reliability is:

A. The probability a product performs without failure for a specified time ✔
B. Product colour
C. Market share
D. Product price

Correct answer: A. The probability a product performs without failure for a specified time

90. MTBF stands for:

A. Monthly Test Batch Frequency
B. Maximum Time Before Fix
C. Minimum Tolerance By Factor
D. Mean Time Between Failures ✔

Correct answer: D. Mean Time Between Failures

91. The bathtub curve describes:

A. Employee turnover
B. Sales over time
C. Failure rate over a product’s life ✔
D. Cost of quality

Correct answer: C. Failure rate over a product’s life

92. A quality engineer’s role includes:

A. Only selling products
B. Only recruitment
C. Only accounting
D. Designing and improving processes to meet quality requirements ✔

Correct answer: D. Designing and improving processes to meet quality requirements

93. Benchmarking compares:

A. Only salaries
B. Only prices
C. Only logos
D. Processes or performance against best practices ✔

Correct answer: D. Processes or performance against best practices

94. Hypothesis testing in quality is used to:

A. Only draw charts
B. Guess results
C. Avoid data
D. Decide statistically whether a difference is significant ✔

Correct answer: D. Decide statistically whether a difference is significant

95. Normal distribution is:

A. A symmetric bell-shaped distribution ✔
B. Uniform
C. Only for defects
D. Always skewed

Correct answer: A. A symmetric bell-shaped distribution

96. Standard deviation measures:

A. The most frequent value
B. Spread of data around the mean ✔
C. The total
D. The middle value

Correct answer: B. Spread of data around the mean

97. Regression analysis models:

A. Only categories
B. Relationships between input and output variables ✔
C. Only costs
D. Only defects

Correct answer: B. Relationships between input and output variables

98. Quality audits should be:

A. Objective, evidence-based and independent where possible ✔
B. Secret and unplanned always
C. Focused on blame
D. Based on opinions

Correct answer: A. Objective, evidence-based and independent where possible

99. A run chart plots:

A. Org structures
B. Two variables
C. Categories by frequency
D. Data points over time without control limits ✔

Correct answer: D. Data points over time without control limits

100. Management review in ISO 9001 is performed by:

A. Suppliers only
B. External auditors only
C. Top management to assess the QMS ✔
D. Customers only

Correct answer: C. Top management to assess the QMS

How to Pass the Certified Quality Engineer Exam

  • Read every question carefully; most options look similar, so look for the most precise answer.
  • Revise the questions above topic by topic rather than memorising letters, because option order can change in the live test.
  • You need 80 correct answers out of 100 to pass, so aim to understand at least 85 to stay safe.
  • If you do not clear it on the first attempt, review the questions you missed and use the retake option.

Frequently Asked Questions

How many questions are in the Certified Quality Engineer Professional Certification exam?

The exam has 100 multiple-choice questions, each worth 1 mark.

What is the passing score for the Certified Quality Engineer Professional Certification?

You need at least 80% (80 out of 100) to pass and receive the certificate.

Can I retake the Certified Quality Engineer Professional Certification exam?

Yes. If you score below 80%, you can retry the test after reviewing the topics.

Is the Itronix certificate verifiable?

Yes. Every certificate issued by Itronix Solutions has a unique ID that can be checked on the Itronix verify-certificate page.

More Programming & Development Certification Answers

Disclaimer: These answers are provided for learning and revision. Questions and answers are checked regularly; if you find a mistake, let us know in the comments.

About Priya Dogra

Priya Dogra runs priyadogra.com, where she shares free certification courses, internships, jobs, scholarships and exam preparation guides for Indian students and freshers. Follow her on YouTube, LinkedIn and Instagram for the latest opportunities.

Check Also

Unix/ Linux Certification exam answers 2026

Unix/ Linux Certification Exam Answers 2026 (All 100 Questions)

All 100 Unix/ Linux Certification exam questions with correct answers highlighted - updated 2026.

Leave a Reply

Your email address will not be published. Required fields are marked *